Table of Contents
Advances in Electrical Engineering
Volume 2014, Article ID 514019, 7 pages
http://dx.doi.org/10.1155/2014/514019
Research Article

Single Active Element Based Voltage-Mode Multifunction Filter

1Department of Electronics and Communication Engineering, Jaypee Institute of Information Technology, Noida 201304, India
2Department of Electronics Engineering, Z. H. College of Engineering and Technology, Aligarh Muslim University, Aligarh 202002, India

Received 14 April 2014; Accepted 13 July 2014; Published 18 August 2014

Academic Editor: Richard T. Lauer

Copyright © 2014 Jitendra Mohan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Wilson, “Recent developments in current conveyors and current-mode circuits,” IEE Proceedings Circuits, Devices and Systems, vol. 137, no. 2, pp. 63–77, 1990. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Fabre, O. Saaid, F. Wiest, and C. Boucheron, “Low power current mode second-order bandpass IF filter,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 44, no. 6, pp. 436–446, 1997. View at Publisher · View at Google Scholar · View at Scopus
  3. M. A. Ibrahim, S. Minaei, and H. Kuntman, “A 22.5 MHz current-mode KHN-biquad using differential voltage current conveyor and grounded passive elements,” International Journal of Electronics and Communications, vol. 59, no. 5, pp. 311–318, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Biolek, R. Senani, V. Biolkova, and Z. Kolka, “Active elements for analog signal processing: classification, review, and new proposals,” Radioengineering, vol. 17, no. 4, pp. 15–32, 2008. View at Google Scholar · View at Scopus
  5. S. Maheshwari, “Analogue signal processing applications using a new circuit topology,” IET Circuits, Devices and Systems, vol. 3, no. 3, pp. 106–115, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. M. T. Abuelma'atti and H. A. Al-Zaher, “New universal filter with one input and five outputs using current-feedback amplifiers,” Analog Integrated Circuits and Signal Processing, vol. 16, no. 3, pp. 239–244, 1998. View at Publisher · View at Google Scholar · View at Scopus
  7. H. P. Chen, “Voltage-mode FDCCII-based universal filters,” AEU: International Journal of Electronics and Communications, vol. 62, no. 4, pp. 320–323, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. H. P. Chen, “Single FDCCII-based universal voltage-mode filter,” International Journal of Electronics and Communications (AEU), vol. 63, no. 9, pp. 713–719, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. C. N. Lee and C. M. Chang, “Single FDCCII-based mixed-mode biquad filter with eight outputs,” AEU—International Journal of Electronics and Communications, vol. 63, no. 9, pp. 736–742, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Minaei and E. Yuce, “All-grounded passive elements voltage-mode DVCC-based universal filters,” Circuits, Systems, and Signal Processing, vol. 29, no. 2, pp. 295–309, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  11. C. M. Chang, B. M. Al-Hashimi, C. L. Wang, and C. W. Hung, “Single fully differential current conveyor biquad filters,” IEE Proceedings: Circuits, Devices and Systems, vol. 150, no. 5, pp. 394–398, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. M. A. Ibrahim, H. Kuntman, and O. Cicekoglu, “Single DDCC biquads with high input impedance and minimum number of passive elements,” Analog Integrated Circuits and Signal Processing, vol. 43, no. 1, pp. 71–79, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. C. M. Chang and H. P. Chen, “Single FDCCII-based tunable universal voltage-mode filter,” Circuits, Systems, and Signal Processing, vol. 24, no. 2, pp. 221–227, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. H. P. Chen and Y. Z. Liao, “High-input and low-output impedance voltage-mode universal biquadratic filter using FDCCIIs,” in Proceedings of the 9th International Conference on Solid-State and Integrated-Circuit Technology (ICSICT '08), pp. 1794–1798, Beijing, China, October 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Kaçar and A. Yeşil, “Voltage mode universal filters employing single FDCCII,” Analog Integrated Circuits and Signal Processing, vol. 63, no. 1, pp. 137–142, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Maheshwari, J. Mohan, and D. S. Chauhan, “Novel Cascadable All-Pass/Notch Filters Using a Single FDCCII and Grounded Capacitors,” Circuits, Systems, and Signal Processing, vol. 30, no. 3, pp. 643–654, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Kaçar and A. Yeşil, “FDCCII-based electronically tunable voltage-mode biquad filter,” International Journal of Circuit Theory and Applications, vol. 40, no. 4, pp. 377–383, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Maheshwari and B. Chaturvedi, “Additional high input low output impedance analog networks,” Active and Passive Electronic Components, vol. 2013, Article ID 574925, 9 pages, 2013. View at Publisher · View at Google Scholar
  19. A. A. El-Adawy, A. M. Soliman, and H. O. Elwan, “A novel fully differential current conveyor and applications for analog VLSI,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 47, no. 4, pp. 306–313, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Bhushan and R. W. Newcomb, “Grounding of capacitors in integrated circuits,” Electronics Letters, vol. 3, pp. 148–149, 1967. View at Google Scholar