Abstract

Producers of several high-value crops in California rely heavily on soil fumigants to control key diseases, nematodes, and weeds. Fumigants with broad biocidal activity can affect both target and nontarget soil microorganisms. The ability of nontarget soil microorganisms to recover after fumigation treatment is critical because they play an important role in sustaining the health of agricultural and natural soil systems. Fumigation trial was conducted in Parlier, CA, and the study focuses on the effects of different rates of Telone C35 and also methyl bromide fumigation with polyethylene (PE) and totally impermeable film (TIF) tarps on target and nontarget soil microorganisms using field samples. Results indicated that the populations of target organisms, such as Fusarium oxysporum and Pythium spp., were reduced at all rates of fumigants. Phospholipid fatty acid (PLFA) analysis indicated that all major nontarget soil microbial groups such as Gram positive bacteria, Gram negative bacteria, fungi, and arbuscular mycorrhizal fungi (AMF) were affected by methyl bromide (MeBr) fumigation treatment. In general, the effects of Telone C35 (299 L/ha) under PE tarp had the least impact on microbial community structure and better effect on controlling target microorganisms and, therefore, indicated the better option among fumigation treatments.

1. Introduction

Fumigants are used to control a wide array of soil-borne pests including nematodes, pathogens, and weeds. In California and Florida, soil fumigants are extensively used to grow strawberries, tomatoes, and other high value cash crops [1]. Therefore, to ensure better crop yield and provide greater benefits to growers, soil fumigation has become an important agricultural practice worldwide [2]. Most of the fumigants are known to have broad biocidal activity [3, 4], but their effect on soil microbial community structure was not known until recently [57]. After the phase-out of MeBr in the United States by January 1, 2005, several other replacements are now in use such as chloropicrin (CP), Telone (1,3-dichloropropene or 1,3-D), methyl isothiocyanate (MITC), and dimethyl disulfide (DMDS). Studies by Ibekwe et al. [3] indicate that MeBr has the greatest impact on soil microbial communities and 1,3-D has the least impact. Also, a study by Dangi et al. [8] concluded that DMDS fumigation did not impact the activity of beneficial microorganisms. The effects of other recently used fumigants with various surface sealing techniques on microbial community structure and biomass are still unknown.

The effects of fumigant on beneficial nontarget organisms at the field application are largely unknown due to the problems associated with sample collection soon after the application of fumigants and partly due to the lack of appropriate methods to describe microbial community composition [3, 9]. Genome-based and PLFA approaches can be used for analysis of community structure. Phospholipid fatty acid analysis provides a quantitative biomass measurement, is very sensitive to environmental perturbations, can detect shifts in microbial community composition following treatments [10], and may even be more sensitive in detecting shifts in microbial community composition when compared to nucleic acid based methods [11, 12].

The microbial community composition changes as a result of fumigant applications may lead to changes in the functional diversity of that community and the soil quality [1]. Microorganisms in soil are crucial in sustaining the health of natural and agricultural soil systems [1] and significantly contribute to nutrient cycling, organic matter decomposition, plant nutrient uptake, and maintenance of soil structure [13, 14]. Therefore, it is very important for them to recover after treatment with fumigants for the development of healthy soils.

Fumigation treatments cause alterations in soil microbial populations and can contribute to physical, chemical, and biological changes in soil [4, 15, 16]. Several perturbations during fumigant application are either through tractor-mounted shanks or through irrigation systems and, also, the use of plastic tarps can impact these soil variables [17]. Furthermore, the impact of fumigant application methods on soil properties needs to be given serious consideration.

Soil fumigation is needed to control soil-borne pathogens such as Pythium and Fusarium species [18]. These pathogens have a broad host range, causing general root or crown rots. Pythium spp. tend to attack juvenile or herbaceous plants, while Fusarium solani causes a generalized root rot and Fusarium oxysporum causes vascular wilt. All of the pathogens are capable of causing yield reductions of most ornamental crops currently grown in fumigated soil.

The effects of fumigant on the soil microbial community structure and biomass as well as target soil pathogens are important to gain a broad understanding of the biocidal activity of these fumigants. Therefore, the objectives of this study were to determine the efficacy of fumigation treatments on both target (Pythium spp. and Fusarium oxysporum) and nontarget microorganisms (Gram positive bacteria, Gram negative bacteria, fungi, AMF, actinomycetes, and protozoa) in soil and to compare these organisms in fumigated versus nonfumigated control soils. We hypothesized that (1) methyl bromide and high rate of Telone C35 would be effective to control Fusarium oxysporum and Pythium spp., (2) fumigated plots would result in lower microbial biomass than control soils, and (3) microbial community structure in fumigated soil would be different than in nonfumigated soils.

2. Materials and Methods

2.1. Field Trial, Treatment, and Plot Description

Fumigation trial was conducted in November 2011 at the USDA-ARS San Joaquin Valley Agricultural Sciences Center, Parlier, CA. The field plot tests represent the actual field conditions and, in the present study as stated in the previous study by Gao et al. [17], treatments were replicated three times with randomized complete block design to reduce errors from field variability. Fumigants were shank applied and the plots were 30 m long and 584 mm wide. The soil was a Hanford sandy loam (coarse-loamy, mixed, superactive, nonacid, and thermic Typic Xerorthents), a common soil type of the east side of San Joaquin Valley. This soil had pH 8.0, 45 ppm dissolved organic carbon (DOC), and 22–30% of water holding capacity (WHC). Fumigation and tarp installation were done with commercial application equipment and materials (TriCal, Inc., Hollister, CA). Telone C35 (Dow AgroSciences, Indianapolis, IN; 63.4% 1,3-D and 34.7% CP) was applied at a depth of 45 cm with shanks spaced 50 cm apart at rates of 449 (full or maximum label rate) and 299 (2/3 rate) L/ha. The 2/3 rates included carbonated fumigants by adding CO2 to fumigant tank with the purpose to enhance fumigant dispersion in soil.

After fumigation, the Telone C35 plots were covered with 1-mil PE tarp (TriCal, Inc., Hollister, CA) or TIF tarp (VaporSafe; Raven Industries, Sioux Falls, SD) or left bare. Methyl bromide : CP (67% : 33%) was applied at 449 L/ha with a Nobel plow and covered with PE tarp. The treatments and other fumigation descriptions are given in Table 1. After about 4 weeks of field monitoring on emission and soil fumigant movement, the tarps were cut on 22 November 2011 and removed one week later.

2.2. Sampling

Soil samples were collected after the tarps were removed from upper 0–15 cm depth. The experiment was arranged as a randomized complete block design with three replications in each treatment with total of 24 plots. Three transects were randomly placed on each plot and soil samples were collected from three equally spaced points along each transect and were composited. Samples for PLFA analysis were placed in sealed plastic bags, stored on dry ice immediately after collection, and then returned to the laboratory where they were placed at −20°C freezer until analyzed.

2.3. Target Organisms and Soil Physicochemical Analysis

Determination of Fusarium oxysporum and Pythium spp. populations was performed using dilution plating on Komada’s medium [19] and P5ARP medium [20]. Soil pH was determined by using 1 : 1 soil to deionized water (DI) water ratio. Dissolved organic carbon was determined after saturating the soil with DI water (1 : 1 soil : water) for 24 hours, shaken for a one hour on a reciprocal shaker, and filtered through a Whatman number 42 filter. Carbon recovered in the water extract was determined by using Fusion Total Organic Carbon Analyzer from Teledyne Tekmar. Total nitrogen (TN) and total carbon (TC) contents were determined by dry combustion with a Flash 2000 N & C Soil Analyzer (Thermo Scientific, Pittsburgh, PA). Macronutrients such as Ca, Mg, S, K, and Na were determined using ICP-OES (Varian, Palo Alto, CA).

2.4. Soil PLFA Analysis

Phospholipid fatty acids were extracted from 10 g soil samples using a modified Bligh-Dyer methodology [21]. Fatty acids were directly extracted from soil samples using a mixture of chloroform : methanol : phosphate buffer (1 : 2 : 0.8). Phospholipid fatty acids were separated from neutral and glycolipid fatty acids in a solid phase extraction column. After mild alkaline methanolysis, PLFA samples were qualitatively and quantitatively analyzed using an Agilent 6890 gas chromatograph (Agilent Technologies, Palo Alto, CA) and fatty acids were identified by retention time according to the MIDI eukaryotic method (MIDI Inc., Newark, NJ).

Individual PLFA signatures were used to quantify the abundances of specific microbial groups in soil samples. Gram positive bacteria were identified and quantified by the presence of iso- and anteiso-branched fatty acids, Gram negative bacteria with monounsaturated fatty acids. Fungi were identified and quantified with 18:2 ω6c, arbuscular mycorrhizal fungi (AMF) with 16:1 ω5c, and actinomycetes with 10-methyl fatty acids [2225].

3. Data Analysis

Statistical analysis was undertaken using SAS 9.1 [26]. PLFA peak areas were combined into biomarker groups. Analysis of variance (ANOVA) was conducted on total PLFA and on each biomarker group in order to see how the total microbial biomass and the biomass of each group of organisms were affected by different fumigation treatments. A multivariate method (canonical discriminant analysis) was used to compare soil microbial communities from the different concentrations/fumigants and to determine similarity among microbial communities in the control and fumigated soils. In this analysis, MANOVA on the absolute area of each biomarker was used to identify the linear combination of variables (referred to as canonical variates) that best separated the soil microbial community structure at the different plots. The canonical variates are graphed to summarize group differences [2729]. All statistical analyses were evaluated at the significance level.

4. Results

4.1. General Soil Characteristics

In order to understand the impact of soil fumigants, soil characteristics, macronutrients, and losses of TC, TN, and DOC were determined (Table 2). Total carbon and TN were significantly lower in methyl bromide : chloropicrin fumigation with PE tarp (MeBrPE) and all rates of Telone C35 except in 2/3 application rate of Telone C35 with PE tarp (T2/3 NPE). Soil pH and DOC did not significantly differ among treatments. Among the macronutrients studied, soil Ca and Mg increased significantly in MeBrPE treatment (46.0 mg Ca/kg and 10.34 mg Mg/kg) compared to carbonated Telone C35 with 2/3 application rate with TIF tarp (T2/3COTIF) treatment (28 mg Ca/kg and 6.26 mg Mg/kg). No significant differences were observed in K, Na, and S among treatments.

4.2. Effects of Fumigants on Target Microorganisms

Populations of Fusarium oxysporum and Pythium spp. were significantly () reduced in methyl bromide : chloropicrin fumigation with PE tarp, Telone C35 with 2/3 application rate, and full application rate with PE and TIF tarps as compared to 2/3 and full application rate without any tarp and control plots (Figures 1 and 2). Furthermore, different tarps played an important role along with the fumigants as bare (without tarp) plots have more target microorganisms compared to PE or TIF tarp.

4.3. Phospholipid Fatty Acid Biomarker Values

Total PLFA concentration ranged from 3.497 to 6.4 µg g−1 soil (Figure 3). Methyl bromide (MeBrPE), T2/3COTIF, 2/3 application rate of Telone C35 with TIF tarp (T2/3NTIF), and full application rate of Telone C35 with PE tarp (TFNPE) contained the lowest PLFA and the nonfumigated control plot had the highest PLFA content. Biomarker PLFAs for both Gram positive and Gram negative bacteria were at their lowest concentration in soil from the MeBrPE, T2/3COTIF, T2/3NTIF, and TFNPE (Figures 4(a) and 4(b)). Soils from 2/3 application rate of Telone C35 without any tarp (T2/3NB), T2/3NPE, and full application rate of Telone C35 without any tarp (TFNB) had significantly greater concentrations of both Gram positive () and Gram negative () bacterial biomarker PLFA compared to other fumigation treatments. Mean values for amounts of both the fungal biomarker and the arbuscular mycorrhizal fungal biomarker (Figures 4(c) and 4(d)) were similar to the patterns observed in Gram positive and Gram negative biomarker. The variations to this were the actinomycetes PLFA biomarker (Figure 4(e)), where the concentrations in the control plot were significantly lower than MeBrPE and high rates of Telone C35. Unlike the other PLFAs, mean concentration of actinomycetes biomarker was significantly greater in soils fumigated with MeBrPE compared to control plot.

4.4. Microbial Community Structure

Canonical multivariate analysis indicates differences in soil microbial community structure between the control and fumigated plots (Figure 5). Canonical multivariate analysis suggests that soil microbial communities in MeBrPE fumigated plot are significantly different compared to control and Telone C35 fumigated plots (). Plot fumigated with T2/3NPE is more similar to T2/3NTIF, TFNB, and TFNPE as shown by the closer proximity of biomarker clusters to one another (Figure 5). Lower relative abundance of bacteria and fungi was found in plots fumigated with MeBr.

5. Discussion

Application of fumigants results in a decline of target and nontarget soil microorganisms and biomass. Previous studies on the effect of fumigants on soil microorganisms were limited to the laboratory microcosm experiment [3, 30, 31], but the effect of fumigants on the shift in microbial community structure under field conditions has not been documented for many commercial fumigants and application methods. Ibekwe et al. [3] found negative effects of 1,3-D and CP on actinomycetes and of methyl isothiocyanate (MITC) and MeBr on Gram negative bacteria using a laboratory microcosm experiment. There are few studies on either target [3, 5] or nontarget [18, 32] soil microorganisms; however, effects on both target and nontarget soil microorganisms using field samples are not well understood. Our study evaluated both target soil microorganisms such as species of Pythium spp. and Fusarium oxysporum and nontarget soil microorganisms such as Gram positive, Gram negative, AMF, fungi, and actinomycetes using field samples. Soil microbial biomass (total concentration of PLFAs), although not significant, declined after application of soil fumigants as compared to nonfumigated control soil. All microbial groups, except actinomycetes, had lower concentration of microbial biomass after fumigation compared to nonfumigated control soils. Early laboratory studies by Ibekwe et al. [3] evaluated the effect of different fumigants, such as MeBr, MITC, 1,3-D, and CP, on soil microbial communities and found that MeBr had the greatest impact and 1,3-D has the least impact. Similarly, other studies have observed the decline in microbial biomass after fumigation with different fumigants [5]. As samples are not allowed to be collected immediately after MeBr or other fumigation, studies have relied on a laboratory microcosm experiment for basic results after fumigation treatments to reflect field conditions [3, 5]. The present study evaluated microbial community structure and biomass after fumigation treatments using field samples. Subsequently, samples were collected only after about 4 weeks of fumigation; therefore, the immediate impact on microbial community biomass and structure could not be monitored.

The present study showed that the method of application of fumigants and the use of tarp seem to have played a role in microbial community structure. Because of their high volatility, soil fumigants are subjected to high emission losses and the plastic tarps play an important role as a surface barrier in minimizing emissions [17]. In the Parlier trial, two different tarps were used, PE and TIF. Study also found that 2/3 application rate of Telone C35 with PE tarp and bare plots had greater concentrations of Gram positive bacteria, Gram negative bacteria, fungi, and mycorrhizal PLFA as compared to TIF tarp. Moreover, the use of PE and TIF tarp significantly decreased the target organisms in all the fumigants used.

The populations of Pythium and Fusarium were reduced with all fumigants. However, fumigants were much effective in controlling Pythium spp. compared to F. oxysporum as observed in the past experiments [18]. Bare plot contained higher F. oxysporum and Pythium spp. compared to TIF and PE tarp.

The ability of soil microorganisms such as bacteria and fungi to improve after treatment with pesticide is critical for the development of healthy soils [1]. Our study showed that fungal and AMF biomass tends to significantly decrease in fumigated soils. Comparable results were reported by Klose et al. [5] on the effect of fumigation on fungal and AMF populations which may be significant for management decisions as there are numerous benefits of fungi and AMF on crop production and soil health [33]. Similar trend was observed for Gram negative and Gram positive bacterial biomass. Previous studies on bacterial populations shifts are variable [34], as some reports have suggested that the soil bacterial community after fumigation is dominated by Gram negative bacteria [35] while other studies have reported that Gram positive bacteria recover preferentially after fumigation [3, 31, 36]. Different trend was observed in the actinomycetes PLFA biomarker, where the concentrations in the control plot were significantly lower than MeBr and high rates of Telone C35. Several other studies have found an increase in actinomycetes numbers following fumigation [10, 31].

Canonical variate analysis of PLFA data indicates differences in soil microbial community structure between the control and fumigated plots (Figure 5). Canonical analysis suggests that soil microbial communities in the control and T2/3 NB plots were completely different than plots fumigated with MeBr and Telone C35 with tarps. Data points for the control plots were more separated than treated plots. This supports the hypothesis that soil fumigants can be harmful to soil microbial communities, at least for a short term after fumigation.

Microorganisms possess the ability to give an integrated measure of soil health [37] and abiotic factors can frequently alter the nature of populations and their biochemical potential [14]. Some of the environmental variables influencing soil microorganisms include pH, TC, TN, DOC, and nutrient supply. Soil pH did not significantly differ among treatments. Soil TC increased in higher rate of T2/3 NPE treatments and soil TN increased in lower rate of T2/3 NPE treatments. Soil nitrogen input is mainly derived from the following sources: N deposition [38]; litter decomposition [39]; and bacterial fixation of atmospheric N2 [40]. In our study, the main reason for the increase in soil N and C was probably due to samples containing leaves, roots, or other tissues in soil. Also, we observed little change in DOC concentration among different treatments. MeBrPE treatment contained significantly greater Ca and Mg as was observed in the previous study by Ragab and Okasha [41], where they found a considerable increase in the content of macronutrients, especially Ca and Mg, in the fumigated soils compared to the nonfumigated control soil.

6. Conclusion

Research on the impact of broad biocidal activity of fumigants on soil microbial communities using field samples is unknown. The findings from the present study provide a biocidal activity of fumigants in field conditions. Our data have shown that the populations of target organisms were reduced at all rates of fumigants. Moreover, among different rates of Telone C35, T2/3NPE was considered a better option due to having the least impact on microbial community structure and better efficiency in controlling typical soil-borne plant pathogens such as Pythium spp. and Fusarium oxysporum.

Abbreviations

EC:Electrical conductivity
TC:Total carbon
TN:Total nitrogen
DOC:Dissolved organic carbon
MeBr:Methyl bromide
CP:Chloropicrin
PE:Polyethylene film
TIF:Totally impermeable film.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgments

The authors would like to acknowledge Dr. Suduan Gao, USDA-ARS-SJVASC, Parlier, CA, for providing research site and research guidance and Mrs. Patricia Mungur and Mrs. Mary Terrazas for assistance with field and lab work. Also, the cooperation of Dr. Peter D. Stahl and Soil Ecology Laboratory at the University of Wyoming for gas chromatography analysis was greatly appreciated. They also acknowledge the funding assistance provided by the Pacific Area-Wide Pest Management program for Integrated Methyl Bromide Alternatives to conduct this research.