Table of Contents Author Guidelines Submit a Manuscript
Advances in Mathematical Physics
Volume 2017, Article ID 3807401, 10 pages
https://doi.org/10.1155/2017/3807401
Research Article

A Statistical Damage Constitutive Model for Geomaterials under Plane-Strain Biaxial Stress State

1Key Laboratory of Deep Coal Resource Mining (CUMT), Ministry of Education of China, School of Mines, China University of Mining & Technology, Xuzhou 221116, China
2Department of Energy and Mineral Engineering, EMS Energy Institute and G3 Center, The Pennsylvania State University, University Park, PA 16802, USA

Correspondence should be addressed to Zhijun Wan; moc.621@nawjhz

Received 30 May 2017; Accepted 10 September 2017; Published 17 October 2017

Academic Editor: John D. Clayton

Copyright © 2017 Hongwei Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Hoek and E. T. Brown, “Practical estimates of rock mass strength,” International Journal of Rock Mechanics and Mining Sciences, vol. 34, no. 8, pp. 1165–1186, 1997. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Kupfer, H. K. Hilsdorf, and H. Rusch, “Behavior of concrete under biaxial stresses,” Journal of American Concrete Institute, vol. 66, no. 8, pp. 656–666, 1969. View at Google Scholar · View at Scopus
  3. F. Rummel and C. Fairhurst, “Determination of the post-failure behavior of brittle rock using a servo-controlled testing machine,” Rock Mechanics and Rock Engineering, vol. 2, no. 4, pp. 189–204, 1970. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Hooke and T. A. Jeeves, “Direct search solution of numerical and statistical problems,” Journal of Association for Computing Machinery, vol. 8, no. 2, pp. 212–229, 1961. View at Publisher · View at Google Scholar
  5. N. G. W. Cook, “The failure of rock,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 2, no. 4, pp. 389–403, 1965. View at Publisher · View at Google Scholar
  6. K. Mogi, “Effect of the intermediate principal stress on rock failure,” Journal of Geophysical Research, vol. 72, no. 20, pp. 5117–5131, 1967. View at Publisher · View at Google Scholar
  7. G. A. Wiebols and N. G. W. Cook, “An energy criterion for the strength of rock in polyaxial compression,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 5, no. 6, pp. 529–549, 1968. View at Publisher · View at Google Scholar · View at Scopus
  8. L. S. Costin, “A microcrack model for the deformation and failure of brittle rock,” Journal of Geophysical Research: Solid Earth, vol. 88, no. B11, pp. 9485–9492, 1983. View at Publisher · View at Google Scholar
  9. E. Hoek, D. Wood, and S. Shah, “Modified Hoek-Brown failure criterion for jointed rock masses,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 30, no. 4, p. A215, 1993. View at Publisher · View at Google Scholar
  10. L. Yudhbir, W. Lemanza, and F. Prinzl, “An empirical failure criterion for rock masses,” in Proceedings of the Fifth International Congress on Rock Mechanics, Melbourne, Australia, 1983.
  11. M. S. Paterson and T. F. Wong, Experimental Rock Deformation - The Brittle Field, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. M. You, “True-triaxial strength criteria for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 1, pp. 115–127, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. J. F. Labuz and A. Zang, “Mohr-Coulomb failure criterion,” Rock Mechanics and Rock Engineering, vol. 45, no. 6, pp. 975–979, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Weibull, “A Statistical Distribution Function of Wide Applicability,” Journal of applied mechanics, pp. 293–297, 1951. View at Google Scholar
  15. J. Lubliner, J. Oliver, S. Oller, and E. Oñate, “A plastic-damage model for concrete,” International Journal of Solids and Structures, vol. 25, no. 3, pp. 299–326, 1989. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Krajcinovic and M. A. G. Silva, “Statistical aspects of the continuous damage theory,” International Journal of Solids and Structures, vol. 18, no. 7, pp. 551–562, 1982. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Lemaitre, “A continuous damage mechanics model for ductile fracture,” Journal of Engineering Materials and Technology, vol. 107, no. 1, pp. 83–89, 1985. View at Publisher · View at Google Scholar · View at Scopus
  18. C. A. Tang, “Numerical simulation of progressive rock failure and associated seismicity,” International Journal Of Rock Mechanics And Mining Sciences & Geomechanics Abstracts, vol. 34, no. 2, pp. 249–261, 1997. View at Publisher · View at Google Scholar · View at Scopus
  19. X. Li, W.-G. Cao, and Y.-H. Su, “A statistical damage constitutive model for softening behavior of rocks,” Engineering Geology, vol. 143-144, pp. 1–17, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Deng and D. Gu, “On a statistical damage constitutive model for rock materials,” Computers & Geosciences, vol. 37, no. 2, pp. 122–128, 2011. View at Publisher · View at Google Scholar
  21. C. A. Tang, H. Liu, P. K. K. Lee, Y. Tsui, and L. G. Tham, “Numerical studies of the influence of microstructure on rock failure in uniaxial compression—part I: effect of heterogeneity,” International Journal of Rock Mechanics and Mining Sciences, vol. 37, no. 4, pp. 555–569, 2000. View at Publisher · View at Google Scholar · View at Scopus
  22. W. C. Zhu, J. Liu, C. A. Tang, X. D. Zhao, and B. H. Brady, “Simulation of progressive fracturing processes around underground excavations under biaxial compression,” Tunnelling and Underground Space Technology, vol. 20, no. 3, pp. 231–247, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. C. A. Tang, P. Lin, R. H. C. Wong, and K. T. Chau, “Analysis of crack coalescence in rock-like materials containing three flaws—Part II: Numerical approach,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 7, pp. 925–939, 2001. View at Publisher · View at Google Scholar · View at Scopus
  24. K. L. Soserman and J. P. Giroud, “Relationships between Uniaxial and Biaxial Stresses and Strains in Geosynthics,” Geosynthetics International, vol. 2, no. 2, pp. 495–504, 1995. View at Publisher · View at Google Scholar
  25. M. Mokni and J. Desrues, “Strain localization measurements in undrained plane-strain biaxial tests on Hostun Rf sand,” Mechanics of Cohesive-frictional Materials, vol. 4, no. 4, pp. 419–441, 1999. View at Publisher · View at Google Scholar
  26. G. V. Basheev, P. A. Martynyuk, and E. N. Sher, “Statistical modeling of rock failure under biaxial compression. Part I: Shear crack interaction,” Journal of Mining Science, vol. 39, no. 5, pp. 467–474, 2003. View at Publisher · View at Google Scholar
  27. H. Wang and Y. Song, “Behavior of dam concrete under biaxial compression-tension and triaxial compression-compression-tension stresses,” Frontiers of Architecture and Civil Engineering in China, vol. 2, no. 4, pp. 323–328, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. P. H. S. W. Kulatilake, J. Park, and B. Malama, “A new rock mass failure criterion for biaxial loading conditions,” Geotechnical and Geological Engineering, vol. 24, no. 4, pp. 871–888, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. R. Makhnenko and J. Labuz, “Plane Strain Testing with Passive Restraint,” Rock Mechanics and Rock Engineering, vol. 47, no. 6, pp. 2021–2029, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. E. Papamichos, J. F. Labuz, and I. Vardoulakis, “A surface instability detection apparatus,” Rock Mechanics and Rock Engineering, vol. 27, no. 1, pp. 37–56, 1994. View at Publisher · View at Google Scholar · View at Scopus
  31. Z. Tao, Theory and Practice of Rock Mechanics, Wuhan University: Wuhan, 2013.
  32. H. Zhao, C. Shi, M. Asce, M. Zhao, and X. Li, “Statistical damage constitutive model for rocks considering residual strength,” International Journal of Geomechanics, vol. 16, no. 4, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  33. S.-H. Chang and C.-I. Lee, “Estimation of cracking and damage mechanisms in rock under triaxial compression by moment tensor analysis of acoustic emission,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 7, pp. 1069–1086, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. R. L. Kranz, “Microcracks in rocks: A review,” Tectonophysics, vol. 100, no. 1-3, pp. 449–480, 1983. View at Publisher · View at Google Scholar
  35. H. Horii and S. Nemat-Nasser, “Compression-induced microcrack growth in brittle solids: Axial splitting and shear failure,” Journal of Geophysical Research, vol. 90, no. B4, pp. 3105–3125, 1985. View at Publisher · View at Google Scholar
  36. H. Haeri, A. Khaloo, and M. F. Marji, “Experimental and numerical simulation of the microcrack coalescence mechanism in rock-like materials,” Strength of Materials, vol. 47, no. 5, pp. 740–754, 2015. View at Publisher · View at Google Scholar · View at Scopus
  37. O. Alm, L.-L. Jaktlund, and K. Shaoquan, “The influence of microcrack density on the elastic and fracture mechanical properties of Stripa granite,” Physics of the Earth and Planetary Interiors, vol. 40, no. 3, pp. 161–179, 1985. View at Publisher · View at Google Scholar · View at Scopus
  38. D. Su, M. H. Santare, and G. A. Gazonas, “The effect of crack face contact on the anisotropic effective moduli of microcrack damaged media,” Engineering Fracture Mechanics, vol. 74, no. 9, pp. 1436–1455, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. M. Oda, T. Katsube, and T. Takemura, “Microcrack evolution and brittle failure of Inada granite in triaxial compression tests at 140 MPa,” Journal of Geophysical Research: Solid Earth, vol. 107, no. B10, pp. ECV 9-1–ECV 9-17, 2002. View at Publisher · View at Google Scholar
  40. A. P. Jivkov, “Structure of micro-crack population and damage evolution in quasi-brittle media,” Theoretical and Applied Fracture Mechanics, vol. 70, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  41. W. Xu and L. Wei, “Study on statistical damage constitutive mode of rock,” Chinese Journal of Rock Mechanics and Engineering, vol. 21, no. 6, pp. 787–791, 2002. View at Google Scholar
  42. Z.-L. Wang, Y.-C. Li, and J. G. Wang, “A damage-softening statistical constitutive model considering rock residual strength,” Computers & Geosciences, vol. 33, no. 1, pp. 1–9, 2007. View at Publisher · View at Google Scholar · View at Scopus
  43. B. H. G. Brady and J. W. Bray, “Boundary element method for determining stresses and displacements around long openings in a triaxial stress field,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 15, no. 5, pp. A103–A103, 1978. View at Publisher · View at Google Scholar
  44. J. B. Keats, F. P. Lawrence, and F. K. Wang, “Weibull maximum likelihood parameter estimates with censored data,” Journal of Quality Technology, vol. 29, no. 1, pp. 105–110, 1997. View at Google Scholar
  45. M. Cai, P. K. Kaiser, Y. Tasaka, and M. Minami, “Determination of residual strength parameters of jointed rock masses using the GSI system,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 2, pp. 247–265, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. K. Hashiba, S. Okubo, and K. Fukui, “A new testing method for investigating the loading rate dependency of peak and residual rock strength,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 6, pp. 894–904, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. W. G. Pariseau, “Fitting failure criteria to laboratory strength tests,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 4, pp. 637–646, 2007. View at Publisher · View at Google Scholar
  48. L. B. Colmenares and M. D. Zoback, “A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 39, no. 6, pp. 695–729, 2002. View at Publisher · View at Google Scholar · View at Scopus
  49. L. B. Colmenares and M. D. Zoback, “Statistical evaluation of six rock failure criteria constrained by polyaxial test data,” Rock Mechantcs tn Nattonal Interes. Elsworth, Ttnucct Heasley, pp. 1251–1258, 2001. View at Publisher · View at Google Scholar · View at Scopus
  50. H. Rafiai, “New empirical polyaxial criterion for rock strength,” International Journal of Rock Mechanics & Mining Sciences, vol. 48, no. 6, pp. 922–931, 2011. View at Publisher · View at Google Scholar · View at Scopus
  51. S. Zhou, “A program to model the initial shape and extent of borehole breakout,” Computers and Geosciences, vol. 20, no. 7-8, pp. 1143–1160, 1994. View at Publisher · View at Google Scholar · View at Scopus
  52. W. Cao, Z. Fang, and X. Tang, “A study of statistical constitutive model for soft and damage rocks,” Chinese Journal of Rock Mechanics and Engineering, vol. 17, no. 6, pp. 628–633, 1988. View at Google Scholar
  53. C. Tang, J. A. Hudson, and X. H. Xu, Rock Failure Instability and Related Aspects of Earthquake Mechanisms, China Coal Industry Publishing House, Beijing, China, 1993.
  54. W. C. Zhu and C. A. Tang, “Micromechanical model for simulating the fracture process of rock,” Rock Mechanics and Rock Engineering, vol. 37, no. 1, pp. 25–56, 2004. View at Publisher · View at Google Scholar · View at Scopus
  55. D. C. Drucker and W. Prager, “Soil mechanics and plastic analysis or limit design,” Quarterly of Applied Mathematics, vol. 10, no. 2, pp. 157–165, 1952. View at Publisher · View at Google Scholar
  56. B. Friedman, Principles and techniques of applied mathematics, John Wiley & Sons,Inc., New York, USA, 1956. View at MathSciNet
  57. N. F. Ince, C.-S. Kao, M. Kaveh, A. Tewfik, and J. F. Labuz, “A machine learning approach for locating acoustic emission,” Eurasip Journal on Advances in Signal Processing, vol. 2010, no. 1, Article ID 895486, 2010. View at Publisher · View at Google Scholar · View at Scopus
  58. J. Labuz, S. Dai, and E. Papamichos, “Plane-strain compression of rock-like materials,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 33, no. 6, pp. 573–584, 1996. View at Publisher · View at Google Scholar