Determining the Geometrical Sizes of Plates with Internal Hinges by Using Additional Conditions

Table 3

The solutions and dimensions that are obtained when the bisection method is used by utilizing the data in Cases 1 and 2 for different values of and .

(cm)		(cm)
		1	2	1	2	1	2	1	2	1	2
			2	0.2005	0.2857	0.7001	1.0224	0.7683	1.0797	0.2885	0.4486	0.3459	0.5249
			6	0.0236	0.0333	0.1311	0.1818	0.1872	0.2277	0.0354	0.0550	0.0747	0.1045
	4	0.0836	0.1186	0.3926	0.5582	0.4879	0.6417	0.1233	0.1918	0.1764	0.2606
	3	0.1341	0.1905	0.5486	0.7909	0.6359	0.8673	0.1957	0.3044	0.2520	0.3783
	3.5	0.1069	0.1518	0.4704	0.6735	0.5637	0.7556	0.1570	0.2441	0.2119	0.3158
	3.25	0.1200	0.1704	0.5095	0.7322	0.6003	0.8118	0.1757	0.2733	0.2314	0.3461
	3.375	0.1133	0.1609	0.4900	0.7028	0.5821	0.7838	0.1662	0.2585	0.2215	0.3307
	3.3125	0.1167	0.1656	0.4998	0.7175	0.5912	0.7978	0.1709	0.2658	0.2264	0.3384
	3.3438	0.1150	0.1633	0.4949	0.7101	0.5867	0.7908		0.2621	0.2240	0.3345
	3.3282			0.4973	0.7138	0.5889	0.7943		0.2639		0.3365
	3.336				0.7119		0.7925