Table of Contents Author Guidelines Submit a Manuscript
Research Letters in Materials Science
Volume 2007 (2007), Article ID 34737, 4 pages
http://dx.doi.org/10.1155/2007/34737
Research Letter

Freeform Fabrication of Titanium Aluminide via Electron Beam Melting Using Prealloyed and Blended Powders

Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, NC 27695-7906, USA

Received 28 October 2007; Accepted 27 December 2007

Academic Editor: Rui Vilar

Copyright © 2007 Denis Cormier et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Denis Cormier, Ola Harrysson, Tushar Mahale, and Harvey West, “Freeform Fabrication of Titanium Aluminide via Electron Beam Melting Using Prealloyed and Blended Powders,” Research Letters in Materials Science, vol. 2007, Article ID 34737, 4 pages, 2007. doi:10.1155/2007/34737