Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2010 (2010), Article ID 241695, 5 pages
Research Article

Surface Functionality Features of Nanosized Silica Obtained by Electron Beam Evaporation at Ambient Pressure

1Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Sciences, 4/1 Institutskaya Street, Novosibirsk 630090, Russia
2Engineering Technology Center RADIANT, Ltd., 50 Dibunovskaya Street, St-Petersburg 197183, Russia
3Budker Institute of Nuclear Physics of the Siberian Division of the Russian Academy of Sciences, 11 Prospect Akademika Lavrentieva, Novosibirsk 630090, Russia

Received 5 March 2010; Accepted 13 May 2010

Academic Editor: Sridhar Komarneni

Copyright © 2010 S. P. Bardakhanov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


A series of nanosized silica powders with different specific surface values are synthesized by electron beam evaporation in air at ambient pressure. The obtained silica samples are featured with relatively low apparent density and high content of oxygen and hydroxyl groups on the surface making these materials promising for specific applications.