Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2012, Article ID 235028, 8 pages
http://dx.doi.org/10.1155/2012/235028
Research Article

Stress Corrosion Cracking of Steel and Aluminum in Sodium Hydroxide: Field Failure and Laboratory Test

1Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, 81310 Johor, Malaysia
2Department of Refrigeration and Air Conditioning, Politeknik Negeri Bandung, Bandung 40012, Indonesia
3Faculty of Maritime Studies and Marine Science, University Malaysia Terengganu, 21030 Kuala Terengganu, Malaysia

Received 30 December 2011; Accepted 30 January 2012

Academic Editor: Pavel Lejcek

Copyright © 2012 Y. Prawoto et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Y. Prawoto, K. Sumeru, and W. B. Wan Nik, “Stress Corrosion Cracking of Steel and Aluminum in Sodium Hydroxide: Field Failure and Laboratory Test,” Advances in Materials Science and Engineering, vol. 2012, Article ID 235028, 8 pages, 2012. https://doi.org/10.1155/2012/235028.