- About this Journal ·
- Abstracting and Indexing ·
- Aims and Scope ·
- Annual Issues ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 140643, 6 pages
Morphology and In Vitro Behavior of Electrospun Fibrous Poly(D,L-lactic acid) for Biomedical Applications
1Department of Orthodontics, Nihon University School of Dentistry at Matsudo, 2-870-1 Sakaecho Nishi, Matsudo, Chiba 271-8587, Japan
2Department of Dental Biomaterials, Nihon University School of Dentistry at Matsudo, 2-870-1 Sakaecho Nishi, Matsudo, Chiba 271-8587, Japan
3Department of Oral Biomaterials and Technology, Showa University School of Dentistry, 1-5-8 Hatanodai, Shinagawa-ku, Tokyo 142-8555, Japan
4Department of Dental Caries and Aesthetic Dentistry, Nihon University School of Dentistry at Matsudo, 2-870-1 Sakaecho Nishi, Matsudo, Chiba 271-8587, Japan
Received 26 December 2012; Accepted 10 May 2013
Academic Editor: Peter Majewski
Copyright © 2013 Toshihiro Inami et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citations to this Article [2 citations]
The following is the list of published articles that have cited the current article.
- Shuai Li, and Xu-Hong Yang, “Fabrication and Characterization of Electrospun Wool Keratin/Poly(vinyl alcohol) Blend Nanofibers,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–7, 2014.
- Nitu Bhaskar, Nagarajan Padmavathy, Shubham Jain, Suryasarathi Bose, and Bikramjit Basu, “Modulated in vitro biocompatibility of unique crosslinked salicyclic acid-poly (ɛ-caprolactone) based biodegradable polymer,” ACS Applied Materials & Interfaces, 2016.