Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013, Article ID 319259, 9 pages
http://dx.doi.org/10.1155/2013/319259
Research Article

Dynamic Properties and Fatigue Life of Stone Mastic Asphalt Mixtures Reinforced with Waste Tyre Rubber

Center for Transportation Research, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 26 May 2013; Accepted 8 September 2013

Academic Editor: Zhimin Liu

Copyright © 2013 Nuha Salim Mashaan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Mahrez, Properties of rubberised bitumen binder and its effect on the bituminous mix [M.S. dissertation], Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, 1999.
  2. F. K. M. Hamed, Evaluation of fatigue resistance for modified asphalt concrete mixture based on dissipate energy concept [Ph.D. thesis], Technische University, Darmstadt, Germany, 2010.
  3. N. S. Mashaan, The effect of crumb rubber modifier to the properties of and rheological behaviour of asphalt binder [M.S. dissertation], Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, 2012.
  4. Y. Huang, R. N. Bird, and O. Heidrich, “A review of the use of recycled solid waste materials in asphalt pavements,” Resources, Conservation and Recycling, vol. 52, no. 1, pp. 58–73, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. A. N. S. Beaty, “Latex-modified bitumen for improved resistance to brittle fracture,” Highways and Transportation, vol. 39, no. 9, pp. 32–41, 1992. View at Google Scholar · View at Scopus
  6. D. I. Hanson, K. Y. Foo, E. R. Brown, and R. Denson, “Evaluation and characterization of a rubber-modified hot mix asphalt pavement,” Transportation Research Record, no. 1436, pp. 98–107, 1994. View at Google Scholar
  7. J. E. Huffman, “Sahuaro concept of asphalt-rubber binders,” in Proceedings of the 1st Asphalt Rubber User Producer Workshop, Scottsdale, Ariz, USA, 1980.
  8. D. R. Brown, D. Jared, C. Jones, and D. Watson, “Georgia's experience with crumb rubber in hot-mix asphalt,” Transportation Research Record, no. 1583, pp. 45–51, 1997. View at Google Scholar · View at Scopus
  9. G. W. Maupin Jr., “Hot mix asphalt rubber applications in Virginia,” Transportation Research Record, no. 1530, pp. 18–24, 1996. View at Google Scholar · View at Scopus
  10. E. Charania, J. O. Cano, and R. H. Schnormeier, “Twenty- year study of asphalt rubber pavement in Phoenix, Arizona,” Transportation Research Record, vol. 1307, pp. 29–38, 1991. View at Google Scholar
  11. M. Stroup-Gardiner, B. Chadbourn, and D. E. Newcomb, “Babbitt, Minnesota: case study of pretreated crumb rubber modified asphalt concrete,” Transportation Research Record, no. 1530, pp. 34–42, 1996. View at Google Scholar · View at Scopus
  12. E. R. Brown and M. Hemant, “Evaluation of Labrotary properties of SMA mixture,” Tech. Rep. 93-5, National Center for Asphalt Technology, Auburn University, 1993. View at Google Scholar
  13. M. Ratnasamy and B. K. Bujang, “Laboratory diameteral fatigue performance of SMA with cellulose oil palm fiber,” American Journal of Applied Sciences, vol. 3, no. 9, pp. 2005–2010, 2006. View at Google Scholar
  14. A. Mahrez, Properties and performance of stone mastic asphalt reinforced with glass fibre [Ph.D. thesis], Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, 2008.
  15. C. A. O'Flaherty, Highway Engineering Textbook, Edward Arnold, London, UK, 3rd edition, 1988.
  16. P. S. Shaw, Stress-strain relationships for granular materials under repeated loading [Ph.D. thesis], Department of Civil Engineering, University of Nottingham, Nottingham, UK, 1980.
  17. W. Hadley, W. Hudson, and T. W. Kennedy, “A method of estimating tensile properties of materials tested in indirect tension,” Tech. Rep. 41, Center for Highway Research, Austin, Tex, USA, 1970. View at Google Scholar
  18. S. Aflaki and M. Memarzadeh, “Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen,” Construction and Building Materials, vol. 25, no. 4, pp. 2094–2106, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Raad and S. Saboundjian, “Fatigue behavior of rubber-modified pavements,” Transportation Research Record, no. 1639, pp. 73–82, 1998. View at Google Scholar · View at Scopus
  20. N. S. Mashaan and M. R. Karim, “Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility,” Materials Research, vol. 16, no. 1, pp. 116–127, 2013. View at Publisher · View at Google Scholar
  21. M. Castro and J. A. Sánchez, “Estimation of asphalt concrete fatigue curves—a damage theory approach,” Construction and Building Materials, vol. 22, no. 6, pp. 1232–1238, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Arabani, S. M. Mirabdolazimi, and A. R. Sasani, “The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures,” Construction and Building Materials, vol. 24, no. 6, pp. 1060–1068, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, “Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders,” International Journal of Physical Sciences, vol. 6, no. 4, pp. 684–690, 2011. View at Google Scholar · View at Scopus
  24. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, “Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder,” International Journal of Physical Sciences, vol. 6, no. 9, pp. 2189–2193, 2011. View at Google Scholar · View at Scopus
  25. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, “An overview of crumb rubber modified asphalt,” International Journal of Physical Sciences, vol. 7, no. 2, pp. 166–170, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. A. H. Ali, N. S. Mashaan, and M. R. Karim, “Investigations of physical and rheological properties of aged rubberised bitumen,” Advances in Materials Science and Engineering, vol. 2013, Article ID 239036, 7 pages, 2013. View at Publisher · View at Google Scholar