Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013, Article ID 415246, 8 pages
http://dx.doi.org/10.1155/2013/415246
Review Article

A Review on the Effect of Crumb Rubber Addition to the Rheology of Crumb Rubber Modified Bitumen

1Centre for Transportation Research, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2Universiti Tenaga Nasional, Putrajaya Campus, Jalan Ikram-Uniten, 43000 Kajang, Selangor, Malaysia

Received 31 May 2013; Accepted 11 September 2013

Academic Editor: John W. Gillespie

Copyright © 2013 Mohd Rasdan Ibrahim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. L. McQuillen, H. B. Takallou, R. Gary Hicks, and D. Esch, “Economic analysis of rubber-modified asphalt mixes,” Journal of Transportation Engineering, vol. 114, no. 3, pp. 259–277, 1988. View at Google Scholar · View at Scopus
  2. A. H. Ali, N. S. Mashaan, and M. R. Karim, “Investigations of physical and rheological properties of aged rubberised bitumen,” Advances in Materials Science and Engineering, vol. 2013, Article ID 239036, 7 pages, 2013. View at Publisher · View at Google Scholar
  3. J. Peralta, H. M. R. D. Silva, A. V. Machado, J. Pais, P. A. A. Pereira, and J. B. Sousa, “Changes in rubber due to its interaction with bitumen when producing asphalt rubber,” Road Materials and Pavement Design, vol. 11, no. 4, pp. 1009–1031, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. W. C. Vonk and A. L. Bull, “Phase phenomena and concentration effects in blends of bitumen and cariflex TR,” in Proceedings of the 7th International Roofing Congress, Munich, Germany, 1989.
  5. D. Lo Presti, G. Airey, and P. Partal, “Manufacturing terminal and field bitumen-tyre rubber blends: the importance of processing conditions,” Procedia, vol. 53, pp. 485–494, 2012. View at Publisher · View at Google Scholar
  6. M. Attia and M. Abdelrahman, “Enhancing the performance of crumb rubber-modified binders through varying the interaction conditions,” International Journal of Pavement Engineering, vol. 10, no. 6, pp. 423–434, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. T. C. Billiter, J. S. Chun, R. R. Davison, C. J. Glover, and J. A. Bullin, “Investigation of the curing variables of asphalt rubber binder,” Petroleum Science and Technology, vol. 15, no. 5-6, pp. 445–469, 1997. View at Google Scholar · View at Scopus
  8. “The Effects of digesting Crumb Rubber in Modified Binders,” The University of Wisconsin—Madison Asphalt Research Group in collaboration with the Recycled Materials Resource Center, pp. 1–13, 2011.
  9. D. X. Cheng and R. G. Hicks, “Summary of Rubber Modified Asphalt Product Specifications from around the World,” Ontario Tire Stewardship, pp. 1–218, 2012.
  10. “Crumb rubber modifier design procedures and construction practices,” Workshop Notes FHWA-SA-93-011, Design procedure and construction practices, US Department of Transportation, Federal Highway Administration, 1993.
  11. F. J. Navarro, P. Partal, F. J. Martínez-Boza, and C. Gallegos, “Influence of processing conditions on the rheological behavior of crumb tire rubber-modified bitumen,” Journal of Applied Polymer Science, vol. 104, no. 3, pp. 1683–1691, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. J. G. Chehovits, “Design Methods for Hot Mix Asphalt—Rubber Concrete Paving Materials,” presented at the National Seminar on Asphalt-Rubber, 1989.
  13. L. F. M. Leite, R. S. Constantino, and A. Vivoni, “Rheological studies of asphalt with ground tire rubber,” Road Materials and Pavement Design, vol. 2, no. 2, pp. 125–139, 2001. View at Publisher · View at Google Scholar
  14. E. L. Green and W. J. Tolonen, “The chemical and physical properties of asphalt-rubber mixtures,” Tech. Rep. ADOT-RS-14 (162), Arizona Department of Transportation, 1977. View at Google Scholar
  15. S. Lalwani, A. Abushihada, and A. Halasa, “Reclaimed rubber-asphalt blends measurement of rheological properties to assess toughness, resiliency, consistency and temperature sensitivity,” Journal of the Association of Asphalt Paving Technologists, vol. 51, pp. 562–579, 1982. View at Google Scholar
  16. H. B. Takallou, Mix Design Guidelines for Rubber Modified Asphalt Concrete, Tak Associates, Portland, Ore, USA, 1991.
  17. D. Q. Sun and L. H. Li, “Factors affecting the viscosity of crumb rubber-modified asphalt,” Petroleum Science and Technology, vol. 28, no. 15, pp. 1555–1566, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Shen and S. Amirkhanian, “The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders,” The International Journal of Pavement Engineering, vol. 6, no. 4, pp. 265–271, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. K. D. Jeong, S. J. Lee, S. N. Amirkhanian, and K. W. Kim, “Interaction effects of crumb rubber modified asphalt binders,” Construction and Building Materials, vol. 24, no. 5, pp. 824–831, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Aflaki and M. Memarzadeh, “Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen,” Construction and Building Materials, vol. 25, no. 4, pp. 2094–2106, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Li, H. Zhao, and K. Liao, “Study on the technological conditions of crumb tire rubber-modified bitumens,” Petroleum Science and Technology, vol. 27, no. 14, pp. 1521–1533, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. B. Celauro, C. Celauro, D. Lo Presti, and A. Bevilacqua, “Definition of a laboratory optimization protocol for road bitumen improved with recycled tire rubber,” Construction and Building Materials, vol. 37, pp. 562–572, 2012. View at Publisher · View at Google Scholar
  23. H. Wang, Z. You, J. Mills-Beale, and P. Hao, “Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber,” Construction and Building Materials, vol. 26, no. 1, pp. 583–590, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. F. M. Nejad, P. Aghajani, A. Modarres, and H. Firoozifar, “Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods,” Construction and Building Materials, vol. 26, no. 1, pp. 481–489, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. T. C. Billiter, R. R. Davison, C. J. Glover, and J. A. Bullin, “Physical properties of asphalt-rubber binder,” Petroleum Science and Technology, vol. 15, no. 3-4, pp. 205–236, 1997. View at Google Scholar · View at Scopus
  26. P. E. Sebaaly, V. T. Gopal, and J. A. Epps, “Low temperature properties of crumb rubber modified binders,” Road Materials and Pavement Design, vol. 4, no. 1, pp. 29–49, 2003. View at Publisher · View at Google Scholar
  27. H. A. Khalid and I. Artamendi, “Performance based characterisation of crumb rubber asphalt modified using the wet process,” Road Materials and Pavement Design, vol. 4, no. 4, pp. 385–399, 2003. View at Google Scholar
  28. P. Cong, P. Xun, M. Xing, and S. Chen, “Investigation of asphalt binder containing various crumb rubbers and asphalts,” Construction and Building Materials, vol. 40, pp. 632–641, 2013. View at Publisher · View at Google Scholar
  29. F. J. Navarro, P. Partal, F. Martínez-Boza, and C. Gallegos, “Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens,” Fuel, vol. 83, no. 14-15, pp. 2041–2049, 2004. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Ghavibazoo and M. Abdelrahman, “Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder,” International Journal of Pavement Engineering, vol. 14, no. 5, pp. 517–530, 2012. View at Publisher · View at Google Scholar
  31. C. Thodesen, K. Shatanawi, and S. Amirkhanian, “Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity,” Construction and Building Materials, vol. 23, no. 1, pp. 295–303, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. R. Cao and Q. Bai, “Laboratory evaluation of performances of asphalt rubber and gap graded mixtures,” in Proceedings of the 7th International Conference of Chinese Transportation Professionals Congress: Plan, Build, and Manage Transportation Infrastructures in China (ISSTP '07), pp. 786–798, May 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Ould Henia and A.-G. Dumont, “Effect of base bitumen composition on asphalt rubber binder properties,” in Proceedings of the International Symposium on Asphalt Pavement and Environment (ISAP '08), pp. 21–30, Zürich, Switzerland, August 2008.
  34. N. Sunthonpagasit and M. R. Duffey, “Scrap tires to crumb rubber: feasibility analysis for processing facilities,” Resources, Conservation and Recycling, vol. 40, no. 4, pp. 281–299, 2004. View at Publisher · View at Google Scholar · View at Scopus
  35. L. F. M. Leite and B. G. Soares, “Interaction of asphalt with ground tire rubber,” Petroleum Science and Technology, vol. 17, no. 9-10, pp. 1071–1088, 1999. View at Google Scholar · View at Scopus
  36. S. Liu, W. Cao, J. Fang, and S. Shang, “Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt,” Construction and Building Materials, vol. 23, no. 7, pp. 2701–2708, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. G.-X. Yu, Z.-M. Li, X.-L. Zhou, and C.-L. Li, “Crumb rubber-modified asphalt: microwave treatment effects,” Petroleum Science and Technology, vol. 29, no. 4, pp. 411–417, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. K. Shatanawi, S. Biro, C. Thodesen, and S. Amirkhanian, “Effects of water activation of crumb rubber on the properties of crumb rubber-modified binders,” International Journal of Pavement Engineering, vol. 10, no. 4, pp. 289–297, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. J. Shen, S. Amirkhanian, F. Xiao, and B. Tang, “Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders,” Construction and Building Materials, vol. 23, no. 1, pp. 304–310, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Thodesen, K. Shatanawi, S. Amirkhanian, and W. Bridges, “Development of an empirical model for determining G*/sin δ in crumb rubber modified binders,” Construction and Building Materials, vol. 23, no. 5, pp. 1922–1927, 2009. View at Publisher · View at Google Scholar · View at Scopus
  41. S.-J. Lee, C. K. Akisetty, and S. N. Amirkhanian, “The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements,” Construction and Building Materials, vol. 22, no. 7, pp. 1368–1376, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. K. M. Shatanawi, C. C. Thodesen, and S. N. Amirkhanian, “Effects of crumb rubber variability on failure temperature of crumb rubber modified binders,” Road Materials and Pavement Design, vol. 9, no. 2, pp. 291–309, 2008. View at Publisher · View at Google Scholar · View at Scopus
  43. S. A. D. Neto, M. M. Farias, J. C. Pais, and P. A. A. Pereira, “Influence of crumb rubber gradation on asphalt-rubber properties,” in Proceedings of Asphalt Rubber Conference, pp. 2–14, Palm Springs, Calif, USA, 2006.
  44. B. J. Putman and S. N. Amirkhanian, “Crumb rubber modification of binders: interaction and particle effects,” Road Materials and Pavement Design, vol. 10, no. 10, pp. 1–23, 2006. View at Google Scholar
  45. F. J. Navarro, P. Partal, F. Martínez-Boza, C. Valencia, and C. Gallegos, “Rheological characteristics of ground tire rubber-modified bitumens,” Chemical Engineering Journal, vol. 89, no. 1–3, pp. 53–61, 2002. View at Publisher · View at Google Scholar · View at Scopus
  46. C. C. Wong and W.-g. Wong, “Effect of crumb rubber modifiers on high temperature susceptibility of wearing course mixtures,” Construction and Building Materials, vol. 21, no. 8, pp. 1741–1745, 2007. View at Publisher · View at Google Scholar · View at Scopus
  47. A. A. Tayebali, B. B. Vyas, and G. A. Malpass, “Effect of crumb rubber particle size and concentration on performance grading of rubber modified asphalt binders,” in Progress of Superpave (Superior Performing Asphalt Pavement): Evaluation and Implementation, R. N. Jester, Ed., ASTM STP1322, American Society of Testing and Materials,, 1997. View at Google Scholar
  48. J. F. Chipps, R. R. Davison, and C. J. Glover, “A model for oxidative aging of rubber-modified asphalts and implications to performance analysis,” Energy & Fuels, vol. 15, no. 3, pp. 637–647, 2001. View at Publisher · View at Google Scholar · View at Scopus
  49. B. Ali and M. Sadek, “Experimental analysis of the influence of crumb rubber addition on the short-term aging of Syrian asphalt,” Arabian Journal of Geosciences, vol. 6, no. 1, pp. 85–90, 2013. View at Publisher · View at Google Scholar · View at Scopus
  50. Y. Ruan, R. R. Davison, and C. J. Glover, “Oxidation and viscosity hardening of polymer-modified asphalts,” Energy & Fuels, vol. 17, no. 4, pp. 991–998, 2003. View at Publisher · View at Google Scholar · View at Scopus
  51. C. Fanga, C. Wua, R. Yua, Z. Zhangb, M. Zhanga, and S. Zhoua, “Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder,” Polymers for Advanced Technologies, vol. 24, no. 1, pp. 51–55, 2013. View at Publisher · View at Google Scholar
  52. S. C. Huang, “Rheological characteristics of crumb rubber-modified asphalts with long-term aging,” Road Materials and Pavement Design, vol. 7, supplement 1, pp. 37–56, 2006. View at Google Scholar · View at Scopus
  53. S.-J. Lee, J. Hu, H. Kim, S. N. Amirkhanian, and K.-D. Jeong, “Aging analysis of rubberized asphalt binders and mixes using gel permeation chromatography,” Construction and Building Materials, vol. 25, no. 3, pp. 1485–1490, 2011. View at Publisher · View at Google Scholar · View at Scopus
  54. J. Shen, S. Amirkhanian, and S. J. Lee, “The effects of rejuvenating agents on recycled aged CRM binders,” International Journal of Pavement Engineering, vol. 6, no. 4, pp. 273–279, 2005. View at Publisher · View at Google Scholar · View at Scopus
  55. H. Asli, E. Ahmadinia, M. Zargar, and M. R. Karim, “Investigation on physical properties of waste cooking oil—rejuvenated bitumen binder,” Construction and Building Materials, vol. 37, pp. 398–405, 2012. View at Publisher · View at Google Scholar
  56. S. Kocevski, S. Yagneswaran, F. Xiao, V. S. Punith, D. W. Smith Jr., and S. Amirkhanian, “Surface modified ground rubber tire by grafting acrylic acid for paving applications,” Construction and Building Materials, vol. 34, no. 3, pp. 83–90, 2012. View at Publisher · View at Google Scholar · View at Scopus
  57. M. A. Mull, K. Stuart, and A. Yehia, “Fracture resistance characterization of chemically modified crumb rubber asphalt pavement,” Journal of Materials Science, vol. 37, no. 3, pp. 557–566, 2002. View at Publisher · View at Google Scholar · View at Scopus
  58. G. Yadollahi and H. Sabbagh Mollahosseini, “Improving the performance of crumb rubber bitumen by means of poly phosphoric acid (PPA) and vestenamer additives,” Construction and Building Materials, vol. 25, no. 7, pp. 3108–3116, 2011. View at Publisher · View at Google Scholar · View at Scopus
  59. K. M. Shatanawi, S. Biro, A. Geiger, and S. N. Amirkhanian, “Effects of furfural activated crumb rubber on the properties of rubberized asphalt,” Construction and Building Materials, vol. 28, no. 1, pp. 96–103, 2012. View at Publisher · View at Google Scholar · View at Scopus
  60. G. Cheng, B. Shen, and J. Zhang, “A study on the performance and storage stability of crumb rubber-modified asphalts,” Petroleum Science and Technology, vol. 29, no. 2, pp. 192–200, 2011. View at Publisher · View at Google Scholar · View at Scopus