Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 521404, 13 pages
http://dx.doi.org/10.1155/2013/521404
Research Article

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

1College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
2Department of Ocean Science and Engineering, Zhejiang University, Hangzhou 310058, China

Received 26 February 2013; Revised 30 May 2013; Accepted 4 June 2013

Academic Editor: Roham Rafiee

Copyright © 2013 Zhenyu Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. A. Buchan and J. F. Chen, “Blast resistance of FRP composites and polymer strengthened concrete and masonry structures—a state-of-the-art review,” Composites B, vol. 38, no. 5-6, pp. 509–522, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. X.-L. Zhao and L. Zhang, “State-of-the-art review on FRP strengthened steel structures,” Engineering Structures, vol. 29, no. 8, pp. 1808–1823, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. G. S. Langdon, W. J. Cantwell, and G. N. Nurick, “Localised blast loading of fibre-metal laminates with a polyamide matrix,” Composites B, vol. 38, no. 7-8, pp. 902–913, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Schnerch and S. Rizkalla, “Flexural strengthening of steel bridges with high modulus CFRP strips,” Journal of Bridge Engineering, vol. 13, no. 2, pp. 192–201, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. ACI Committee 440, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, Farmington Hills, Mich, USA, 2002.
  6. J. Teng, FRP-Strengthened RC Structures, John Wiley & Sons, 2002.
  7. L. C. Hollaway, “A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties,” Construction and Building Materials, vol. 24, no. 12, pp. 2419–2445, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. M. R. Bambach, X. L. Zhao, and H. Jama, “Energy absorbing characteristics of aluminium beams strengthened with CFRP subjected to transverse blast load,” International Journal of Impact Engineering, vol. 37, no. 1, pp. 37–49, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. T.-C. Nguyen, Y. Bai, X.-L. Zhao, and R. Al-Mahaidi, “Mechanical characterization of steel/CFRP double strap joints at elevated temperatures,” Composite Structures, vol. 93, no. 6, pp. 1604–1612, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Linghoff, M. Al-Emrani, and R. Kliger, “Performance of steel beams strengthened with CFRP laminate—part 1: laboratory tests,” Composites B, vol. 41, no. 7, pp. 509–515, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. R. Bambach, “Axial capacity and crushing behavior of metal-fiber square tubes—steel, stainless steel and aluminum with CFRP,” Composites B, vol. 41, no. 7, pp. 550–559, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Lanier, D. Schnerch, and S. Rizkalla, “Behavior of steel monopoles strengthened with high-modulus CFRP materials,” Thin-Walled Structures, vol. 47, no. 10, pp. 1037–1047, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. T. S. P. Austin, M. M. Singh, P. J. Gregson, and P. M. Powell, “Characterisation of fatigue crack growth and related damage mechanisms in FRP-metal hybrid laminates,” Composites Science and Technology, vol. 68, no. 6, pp. 1399–1412, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Colombi, “Reinforcement delamination of metallic beams strengthened by FRP strips: fracture mechanics based approach,” Engineering Fracture Mechanics, vol. 73, no. 14, pp. 1980–1995, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. T. J. Stratford and J. F. Chen, “Designing for tapers and defects in FRP-strengthened metallic structures,” in Proceedings of the International Symposium on Bond Behaviour of FRP in Structures (BBFS '05), pp. 453–458, Iifc Secretariat, Hong Kong, 2005.
  16. S. Fawzia, R. Al-Mahaidi, X. L. Zhao, and S. Rizkalla, “Strengthening of circular hollow steel tubular sections using high modulus CFRP sheets,” Construction and Building Materials, vol. 21, no. 4, pp. 839–845, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. M. R. Bambach, H. H. Jama, and M. Elchalakani, “Axial capacity and design of thin-walled steel SHS strengthened with CFRP,” Thin-Walled Structures, vol. 47, no. 10, pp. 1112–1121, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Fawzia, X.-L. Zhao, and R. Al-Mahaidi, “Bond-slip models for double strap joints strengthened by CFRP,” Composite Structures, vol. 92, no. 9, pp. 2137–2145, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Haedir, M. R. Bambach, X.-L. Zhao, and R. H. Grzebieta, “Strength of circular hollow sections (CHS) tubular beams externally reinforced by carbon FRP sheets in pure bending,” Thin-Walled Structures, vol. 47, no. 10, pp. 1136–1147, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. M. A. Youssef, “Analytical prediction of the linear and nonlinear behaviour of steel beams rehabilitated using FRP sheets,” Engineering Structures, vol. 28, no. 6, pp. 903–911, 2006. View at Google Scholar
  21. J. Deng, M. M. K. Lee, and S. S. J. Moy, “Stress analysis of steel beams reinforced with a bonded CFRP plate,” Composite Structures, vol. 65, no. 2, pp. 205–215, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Deng, M. M. K. Lee, and S. Li, “Flexural strength of steel-concrete composite beams reinforced with a prestressed CFRP plate,” Construction and Building Materials, vol. 25, no. 1, pp. 379–384, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. N. Jones, Structural Impact, Cambridge University Press, 1997.
  24. N. Jones, “A theoretical study of the dynamic plastic behavior of beams and plates with finite-deflections,” International Journal of Solids and Structures, vol. 7, no. 8, pp. 1007–1029, 1971. View at Google Scholar · View at Scopus
  25. G. R. Cowper and P. S. Symonds, “Strain-harding and strain-rate effects in the impact loading of cantilever beams,” Brown University Division of Applied Mathematics Report 28, 1957. View at Google Scholar
  26. S. R. Bodner and P. S. Symonds, “Experimental and theoretical investigation of the plastic deformation of cantilever beams subjected to impulsive loading,” Journal of Applied Mechanics, vol. 29, p. 719, 1962. View at Google Scholar
  27. H. Jama, M. Bambach, R. Grzebieta, and X.-L. Zhao, “Numerical modelling of simply supported square tubular beams subjected to a uniform blast load,” in Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials (ACMSM '19), pp. 777–782, Christchurch, New Zealand, December 2006. View at Scopus
  28. H. H. Jama, M. R. Bambach, G. N. Nurick, R. H. Grzebieta, and X.-L. Zhao, “Numerical modelling of square tubular steel beams subjected to transverse blast loads,” Thin-Walled Structures, vol. 47, no. 12, pp. 1523–1534, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. S. C. K. Yuen and G. N. Nurick, “Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: subjected to uniform blast load,” International Journal of Impact Engineering, vol. 31, no. 1, pp. 55–83, 2005. View at Publisher · View at Google Scholar · View at Scopus
  30. D. Karagiozova, G. N. Nurick, and S. Chung Kim Yuen, “Energy absorption of aluminium alloy circular and square tubes under an axial explosive load,” Thin-Walled Structures, vol. 43, no. 6, pp. 956–982, 2005. View at Publisher · View at Google Scholar · View at Scopus
  31. V. H. Balden and G. N. Nurick, “Numerical simulation of the post-failure motion of steel plates subjected to blast loading,” International Journal of Impact Engineering, vol. 32, no. 1–4, pp. 14–34, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. G. R. Johnson and W. H. Cook, “Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures,” Engineering Fracture Mechanics, vol. 21, no. 1, pp. 31–48, 1985. View at Google Scholar · View at Scopus
  33. G. R. Johnson and W. H. Cook, “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures,” in Proceedings of the 7th Symposium on Ballistic, pp. 541–547, Hague, The Netherlands, 1983.
  34. N. K. Gupta, M. A. Iqbal, and G. S. Sekhon, “Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles,” International Journal of Impact Engineering, vol. 32, no. 12, pp. 1921–1944, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. ABAQUS, “Abaqus 6. 11 User Documentation,” Dessault Systems, 2011.
  36. O. Pantalé, J.-L. Bacaria, O. Dalverny, R. Rakotomalala, and S. Caperaa, “2D and 3D numerical models of metal cutting with damage effects,” Computer Methods in Applied Mechanics and Engineering, vol. 193, no. 39–41, pp. 4383–4399, 2004. View at Publisher · View at Google Scholar · View at Scopus
  37. Z. Hashin, “Failure criteria for unidirectional fiber composites,” Journal of Applied Mechanics, Transactions ASME, vol. 47, no. 2, pp. 329–334, 1980. View at Google Scholar · View at Scopus
  38. A. Matzenmiller, J. Lubliner, and R. L. Taylor, “A constitutive model for anisotropic damage in fiber-composites,” Mechanics of Materials, vol. 20, no. 2, pp. 125–152, 1995. View at Google Scholar · View at Scopus
  39. C. G. Dávila and P. P. Camanho, “Failure criteria for FRP laminates in plane stress,” NASA TM 212663, 2003. View at Google Scholar
  40. M. Elices, G. V. Guinea, J. Gómez, and J. Planas, “The cohesive zone model: advantages, limitations and challenges,” Engineering Fracture Mechanics, vol. 69, no. 2, pp. 137–163, 2001. View at Publisher · View at Google Scholar · View at Scopus
  41. X.-K. Zhu and J. A. Joyce, “Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization,” Engineering Fracture Mechanics, vol. 85, pp. 1–46, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. D. G. Dixon, “Spall failure in a carbon fibre reinforced thermoplastic composite,” Journal of Materials Science Letters, vol. 9, no. 5, pp. 606–608, 1990. View at Publisher · View at Google Scholar · View at Scopus
  43. J. S. Humphreys, “Plastic deformation of impulsively loaded straight clamped beams(Plastic deformation of flat steel beams impulsively loaded by sheet explosive),” ASME Transactions Series E-Journal of Applied Mechanics, vol. 32, pp. 7–10, 1965. View at Publisher · View at Google Scholar
  44. H. Zhu, L. Zhu, and J. H. Chen, “Influence of stress triaxiality and strain rate on the mechanics behavior of 6063 aluminum alloy and material characterization,” Journal of Materials Science & Engineering, vol. 25, no. 3, pp. 358–362, 2007. View at Google Scholar