Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013, Article ID 585714, 7 pages
http://dx.doi.org/10.1155/2013/585714
Research Article

Experimental Study of Correlation of Mechanical Properties of Al-Si Casts Produced by Pressure Die Casting with Si/Fe/Mn Content and Their Mutual Mass Relations

Faculty of Manufacturing Technologies with Seat in Prešov, Department of Process Technology, Sturova 31, 080 01 Prešov, Slovakia

Received 12 June 2013; Revised 11 October 2013; Accepted 11 October 2013

Academic Editor: Jainagesh Sekhar

Copyright © 2013 Marcel Fedak et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Sadeghi and J. Mahmoudi, “Experimental and theoretical studies on the effect of die temperature on the quality of the products in high-pressure die-casting process,” Advances in Materials Science and Engineering, vol. 2012, Article ID 434605, 9 pages, 2012. View at Publisher · View at Google Scholar
  2. E. Ragan, Väzkost’ a Počiatočné Napätie v Intervale Kryštalizacie, FVT TU Košice so sidlom v Prešov, Prešov, Slovakia, 1997.
  3. E. Ragan and M. Fedak:, “Kvalita odliatku v závislosti na procese tlakového liatia,” in Proceedings of Technology Systems Operation Conference (TSO ’07), p. 2, FVT TU, Presov, Slovakia, 2007.
  4. J. Malik, P. Futáš, I. Vasková et al., “Nehomogenita tlakového odliatku z podeutektického silumيnu,” Slévárenství, vol. 55, no. 7, pp. 307–310, 2007. View at Google Scholar
  5. E. Ragan, Proces Liatia Pod Tlakom, FVT TU Košice so sídlom v Prešove, Prešov, Slovakia, 1997.
  6. E. Ragan and S. Fabian, Liatie Kovov Pod Tlakom, VMV, Prešov, Slovakia, 2007.
  7. P. Dzugas, J. Vilcko, D. Sulik, and J. Mester, “Experimentálne štúdium tuhnutia odliatkov zo zliatin typu Al–Si liatych s tuhnutím pod tlakom-part III,” Slévárenství, no. 1, pp. 7–8, 1992. View at Google Scholar
  8. E. J. Vinarcik, High Integrity Die Casting Processes, John Wiley and Sons, New York, NY, USA, 2003.
  9. E. Ragan, M. Fedak, and P. Skok, “Zabiehavosť v dutine formy pri technológií liatia pod tlakom,” in Operation and Diagnostics of Machines and Production Systems Operational States: Scientific Papers, pp. 146–153, Tribun EU, Kraków, Poland, 2008. View at Google Scholar
  10. J. Laudar, Liatie Pod Tlakom, SVTL, Bratislava, Slovakia, 1964.
  11. D. Bolibruchová and E. Tillova, Zlievarenské Zliatiny Al–Si, Žilinská univerzita v Žiline, Žiline, Slovakia, 2005.
  12. T. Grígerová, R. Koreny, and I. Lukac, Zlievárenstvo neželezných kovov, ALFA, Bratislava, Slovakia, 1988.
  13. J. Jurko, M. Džupon, A. Panda, and J. Zajac, “Study influence of plastic deformation a new extra low carbon stainless steels XCr17Ni7MoTiN under the surface finish when drilling,” Advanced Materials Research, vol. 538–541, pp. 1312–1315, 2012. View at Google Scholar
  14. J. ] Vilcko and S. Slovak, Zlievarenská Technológia, ALFA, Bratislava, Slovakia, 1987.
  15. V. Zabavnik and M. Bursak, Materiál, Tepelné Spracovanie, Kontrola Kvality, Hutnícka Fakulta-TUKE, Košiciach, Slovakia, 2004.
  16. I. Lukac, Vlastnosti a Štruktúra Neželezných Kovov, ALFA, Bratislava, Slovakia, 1987.
  17. J. Valecky, L. Jeníček, V. Oliverius et al., Lití Kovů pod Tlakem, SNTL, Praha, Czech Republic, 1963.
  18. J. Vilcko and P. Dzugas, “Liatie s tuhnutím pod tlakom zo zliatin typu Al–Si, Úvod do problematiky technológie výroby vysokokvalitných odliatkov (časť I),” Slévárenství, no. 12, pp. 499–504, 1990. View at Google Scholar
  19. A. Gorny, J. Manickaraj, Z. Cai, and S. Shankar, “Evolution of Fe based intermetallic phases in Al–Si hypoeutectic casting alloys: influence of the Si and Fe concentrations, and solidification rate,” Journal of Alloys and Compounds, vol. 577, pp. 103–124, 2013. View at Publisher · View at Google Scholar
  20. S. Ji, W. Yang, F. Gao, D. Watson, and Z. Fan, “Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys,” Materials Science and Engineering A, vol. 564, pp. 130–139, 2013. View at Publisher · View at Google Scholar
  21. M. Fedak, P. Semanco, and M. Micko, “Statistical process control method based on weight percent of Al–Si alloy for melting and holding process in die casting,” in Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol. 62, pp. 188–190, 2012. View at Google Scholar
  22. M. Fedak and P. Semanco, “Monitoring of chemical composition of aluminium alloys Al–Si in the maintenance furnace,” in Scientific Papers: Operation and Diagnostics of Machines and Production Systems Operational States, vol. 3, pp. 139–144, RAM, Lüdenscheid, Germany, 2010. View at Google Scholar