Journals
Publish with us
Publishing partnerships
About us
Blog
Advances in Materials Science and Engineering
Journal overview
For authors
For reviewers
For editors
Table of Contents
Special Issues
Advances in Materials Science and Engineering
/
2013
/
Article
/
Tab 2
/
Research Article
Experimental Study of Correlation of Mechanical Properties of Al-Si Casts Produced by Pressure Die Casting with Si/Fe/Mn Content and Their Mutual Mass Relations
Table 2
Technological order and casting parameters.
Basic pressure
MPa
Path of third velocity
270 mm
Third velocity
2.5 rev.
Chamber diameter
60 mm
Size of pellet
25 mm
Temperature of meltage
660 ± 20°C
Insert under the chamber
40 mm
Dose mass into chamber
1300 g
Dosing scoop number
5
Cycle time
50.42 s
Solidification time
4 s
Pressing time
5 s
Unload discharge time
2 s