Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 790318, 13 pages
http://dx.doi.org/10.1155/2013/790318
Research Article

Evaluation of Normal and Nanolayer Composite Thermal Barrier Coatings in Fused Vanadate-Sulfate Salts at 1000°C

Department of Materials, Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia

Received 21 May 2013; Accepted 28 July 2013

Academic Editor: Rui Vilar

Copyright © 2013 Mohammadreza Daroonparvar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, “Mechanisms controlling the durability of thermal barrier coatings,” Progress in Materials Science, vol. 46, no. 5, pp. 505–553, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Brandi, H. J. Grabke, D. Toma, and J. Krüger, “The oxidation behaviour of sprayed MCrAlY coatings,” Surface and Coatings Technology, vol. 86-87, no. 1, pp. 41–47, 1996. View at Publisher · View at Google Scholar · View at Scopus
  3. X. H. Zhong, Y. M. Wang, Z. H. Xu, Y. F. Zhang, J. F. Zhang, and X. Q. Cao, “Hot-corrosion behaviors of overlay-clad yttria-stabilized zirconia coatings in contact with vanadate-sulfate salts,” Journal of the European Ceramic Society, vol. 30, no. 6, pp. 1401–1408, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Ramachandra, K. N. Lee, and S. N. Tewari, “Durability of TBCs with a surface environmental barrier layer under thermal cycling in air and in molten salt,” Surface and Coatings Technology, vol. 172, no. 2-3, pp. 150–157, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Saremi, A. Afrasiabi, and A. Kobayashi, “Bond coat oxidation and hot corrosion behavior of plasma sprayed YSZ coting on Ni superalloy,” Journal of Transaction of JWRI, vol. 36, pp. 41–45, 2007. View at Google Scholar
  6. D. Munz and T. Fett, Mechanical Properties, Failure Behavior, Materials Selection, Springer, Berlin, Germany, 1999, 9:10.
  7. Y. N. Wu, P. L. Ke, Q. M. Wang, C. Sun, and F. H. Wang, “High temperature properties of thermal barrier coatings obtained by detonation spraying,” Corrosion Science, vol. 46, no. 12, pp. 2925–2935, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. L. L. Shaw, D. Goberman, R. Ren et al., “The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions,” Surface and Coatings Technology, vol. 130, no. 1, pp. 1–8, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. A. C. Fox and T. W. Clyne, “Oxygen transport by gas permeation through the zirconia layer in plasma sprayed thermal barrier coatings,” Surface and Coatings Technology, vol. 184, no. 2-3, pp. 311–321, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Saremi, A. Keyvani, and M. H. Sohi, “Hot corrosion resistance and mechanical behavior of atmospheric plasma sprayed conventional and nanostructured zirconia coatings,” International Journal of Modern Physics, vol. 5, pp. 720–727, 2012. View at Google Scholar
  11. Y. Qian, L. Du, and W. Zhang, “Preparation of spherical Y2SiO5 powders for thermal-spray coating,” Particuology, vol. 7, no. 5, pp. 368–372, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Garcia, J. Mesquita-Guimarães, P. Miranzo et al., “Mullite and mullite/ZrO2-7wt.%Y2O3 powders for thermal spraying of environmental barrier coatings,” Journal of Thermal Spray Technology, vol. 19, no. 1-2, pp. 286–293, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Marcinauskas, “Deposition of alumina coatings from nano-powders by plasma spraying,” Journal of Materials Science (MEDŽIAGOTYRA), vol. 16, pp. 47–51, 2010. View at Google Scholar
  14. X. Lin, Y. Zeng, S. W. Lee, and C. Ding, “Characterization of alumina-3 wt.% titania coating prepared by plasma spraying of nanostructured powders,” Journal of the European Ceramic Society, vol. 24, no. 4, pp. 627–634, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Ahmadi-Pidani, R. Shoja-Razavi, R. Mozafarinia, and H. Jamali, “Evaluation of hot corrosion behavior of plasma sprayed ceria and yttria stabilized zirconia thermal barrier coatings in the presence of Na2SO2 + V2O2 molten salt,” Ceramics Internationals, vol. 38, pp. 6613–6620, 2012. View at Google Scholar
  16. M. H. Habibi, L. Wang, and S. M. Guo, “Evolution of hot corrosion resistance of YSZ, Gd2Zr2O7, and Gd2Zr2O7 + YSZ composite thermal barrier coatings in Na2SO4 + V2O5 at 1050°C,” Journal of the European Ceramic Society, vol. 32, no. 8, pp. 1635–1642, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Daroonparvar, M. A. Mat Yajid, N. M. Yusof, and M. S. Hussain, “Formation of a dense and continues Al2O3 layer in nano thermal barrier coating systems for suppression of the spinels growth on the Al2O3 oxide scale during oxidation,” Journal of Alloys and Compounds, vol. 571, pp. 205–220, 2013. View at Google Scholar
  18. M. Daroonparvar, M. A. Mat Yajid, N. M. Yusof et al., “Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as a third layer,” Transactions of Nonferrous Metals Society of China, vol. 23, pp. 1322–1333, 2013. View at Google Scholar
  19. Q. L. Ge, T. C. Lei, J. F. Mao, and Y. Zhou, “In situ transmission electron microscopy observations of the tetragonal-to-monoclinic phase transformation of zirconia in Al2O3-ZrO2 (2 mol % Y2O3) composite,” Journal of Materials Science Letters, vol. 12, no. 11, pp. 819–822, 1993. View at Publisher · View at Google Scholar · View at Scopus
  20. J. R. Brandon and R. Taylor, “Phase stability of zirconia-based thermal barrier coatings part II. Zirconia-ceria alloys,” Surface and Coatings Technology, vol. 46, no. 1, pp. 91–101, 1991. View at Google Scholar · View at Scopus
  21. H. C. Chen, Z. Y. Liu, and Y. C. Chuang, “Degradation of plasma-sprayed alumina and zirconia coatings on stainless steel during thermal cycling and hot corrosion,” Journal of Thin solid Films, vol. 223, no. 1, pp. 56–64, 1993. View at Google Scholar · View at Scopus
  22. S. V. Joshi and M. P. Srivastava, “On the thermal cycling life of plasma-sprayed yttria-stabilized zirconia coatings,” Surface and Coatings Technology, vol. 56, no. 3, pp. 215–224, 1993. View at Google Scholar · View at Scopus
  23. Z. Chen, N. Q. Wu, J. Singh, and S. X. Mao, “Effect of Al2O3 overlay on hot-corrosion behavior of yttria-stabilized zirconia coating in molten sulfate-vanadate salt,” Thin Solid Films, vol. 443, no. 1-2, pp. 46–52, 2003. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Y. Park, J. H. Kim, M. C. Kim, H. S. Song, and C. G. Park, “Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia thermal barrier coatings under hot corrosion,” Surface and Coatings Technology, vol. 190, no. 2-3, pp. 357–365, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. R. L. Jones, “Some aspects of the hot corrosion of thermal barrier coatings,” Journal of Thermal Spray Technology, vol. 6, no. 1, pp. 77–84, 1997. View at Google Scholar · View at Scopus
  26. M. Daroonparvar, M. A. Mat Yajid, N. M. Yusof, and M. S. Hussain, “Improved thermally grown oxide scale in air plasma sprayed NiCrAlY/Nano-YSZ coatings,” Journal of Nanomaterials, vol. 2013, Article ID 520104, 9 pages, 2013. View at Publisher · View at Google Scholar