Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 210486, 7 pages
http://dx.doi.org/10.1155/2014/210486
Research Article

Application of Different Extraction Methods for Investigation of Nonmetallic Inclusions and Clusters in Steels and Alloys

1KTH Royal Institute of Technology, 100 44 Stockholm, Sweden
2Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577, Japan

Received 30 September 2013; Accepted 14 October 2013; Published 9 January 2014

Academic Editor: Ming-Xing Zhang

Copyright © 2014 Diana Janis et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Ohta and H. Suito, “Characteristics of particle size distribution of deoxidation products with Mg, Zr, Al, Ca, Si/Mn and Mg/Al in Fe-10 mass%Ni alloy,” ISIJ International, vol. 46, no. 1, pp. 14–21, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Karasev and H. Suito, “Analysis of size distributions of primary oxide inclusions in Fe-10 mass pct Ni-M (M=Si, Ti, Al, Zr, and Ce) alloy,” Metallurgical and Materials Transactions B, vol. 30, no. 2, pp. 259–270, 1999. View at Google Scholar · View at Scopus
  3. Y. Kanbe, A. Karasev, H. Todoroki, and P. G. Jönsson, “Application of extreme value analysis for two- and threedimensional determinations of the largest inclusion in metal samples,” ISIJ International, vol. 51, no. 4, pp. 593–602, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Doostmohammadi, A. Karasev, and P. G. Jönsson, “A comparison of a two-dimensional and a three-dimensional method for inclusion determinations in tool steel,” Steel Research International, vol. 81, no. 5, pp. 398–406, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Inoue, T. Ariyama, and H. Suito, “Extraction and evaluation of inclusion particles in steel,” in Proceedings of the Asia Steel International Conference, S11–16, pp. 1–9, Korean Institute of Metals and Materials, May 2009.
  6. R. Inoue, K. Kiyokawa, K. Tomoda, S. Ueda, and T. Ariyama, “Three-dimensional estimation of multi-component inclusion particles in steel,” in Proceedings of the 8th International Workshop on Progress in Analytical Chemistry and Materials Characterisation in the Steel and Metal Industries (CETAS '11), OC17, pp. 118–125, Luxembourg, Luxembourg, May 2011.
  7. R. Inoue, S. Ueda, T. Ariyama, and H. Suito, “Extraction of nonmetallic inclusion particles containing MgO from steel,” ISIJ International, vol. 51, no. 12, pp. 2050–2055, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. F. Kurosawa, I. Taguchi, and R. Matsumoto, “Observation and analysis of carbides in steels using non-aqueous electrolyte,” Journal of the Japan Institute of Metals, vol. 44, no. 11, pp. 1288–1295, 1980. View at Google Scholar · View at Scopus
  9. N. Kojola, S. Ekerot, and P. Jönsson, “Pilot plant study of clogging rates in low carbon and stainless steel grades,” Ironmaking and Steelmaking, vol. 38, no. 2, pp. 81–89, 2011. View at Publisher · View at Google Scholar · View at Scopus