Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 238251, 6 pages
http://dx.doi.org/10.1155/2014/238251
Research Article

A Study on the Void Formation in Residual Wall Thickness of Fluid-Assisted Injection Molding Parts

1Molding & Forming Technology R&D Group, Korea Institute of Industrial Technology, 7-46 Songdo-dong, Yeonsu-gu, Incheon 406-840, Republic of Korea
2Department of Mechanical Engineering, Ajou University, San 5 Woncheon-dong, Yeongtong-gu, Suwon, Kyungki-do 443-749, Republic of Korea
3Department of Manufacturing Engineering, University of Texas Pan-American, Edinburg, TX 78539, USA

Received 23 December 2013; Accepted 22 April 2014; Published 9 June 2014

Academic Editor: Mohd Sapuan Salit

Copyright © 2014 Hyung-Pil Park et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Tang-Qing Kuang, Bai-Ping Xu, Guo-Fa Zhou, and Lih-Sheng Turng, “Numerical simulation on residual thickness of pipes with curved sections in water-assisted co-injection molding,” Journal Of Applied Polymer Science, vol. 132, no. 34, 2015. View at Publisher · View at Google Scholar
  • Chaofang Wang, Ming Huang, Changyu Shen, and Zhenfeng Zhao, “Warpage prediction of the injection-molded strip-like plastic parts,” Chinese Journal Of Chemical Engineering, vol. 24, no. 5, pp. 665–670, 2016. View at Publisher · View at Google Scholar
  • Seunghwan Myeong, and Hyungjun Seo, “Which Type of Social Capital Matters for Building Trust in Government? Looking for a New Type of Social Capital in the Governance Era,” Sustainability, vol. 8, no. 4, 2016. View at Publisher · View at Google Scholar
  • Khawar Rehman, and Yong-Sik Cho, “Building Damage Assessment Using Scenario Based Tsunami Numerical Analysis and Fragility Curves,” Water, vol. 8, no. 3, 2016. View at Publisher · View at Google Scholar
  • Patar Ebenezer Sitorus, Tuyen Quang Le, Jin Hwan Ko, Tri Quang Truong, and Hoon Cheol Park, “Design, implementation, and power estimation of a lab-scale flapping-type turbine,” Journal Of Marine Science And Technology, vol. 21, no. 1, pp. 115–128, 2016. View at Publisher · View at Google Scholar
  • Wenwen Liu, Lixuan Wu, Dewei Lai, Tangqing Kuang, Bilong Cheng, and Junyu Pan, “Review of fluid-projectile-assisted injection molding technology,” Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, vol. 32, no. 11, pp. 184–189, 2016. View at Publisher · View at Google Scholar
  • Abu Bakar Sulong, Amir Arifin, and Zambri Harun, “Jig prototype for computer-assisted total knee replacement and its flow simulation,” International Journal of Technology, vol. 7, no. 1, pp. 132–140, 2016. View at Publisher · View at Google Scholar