Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 241613, 8 pages
http://dx.doi.org/10.1155/2014/241613
Research Article

A Study on Occupancy and Compressive Strength of Concrete with Produced Injection Method

Department of Civil Engineering, Technology Faculty, Firat University, 23119 Elazig, Turkey

Received 28 March 2014; Revised 7 May 2014; Accepted 11 May 2014; Published 28 May 2014

Academic Editor: Ying Li

Copyright © 2014 Cevdet Emin Ekinci and Omer Kelesoglu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Bhanja and B. Sengupta, “Influence of silica fume on the tensile strength of concrete,” Cement and Concrete Research, vol. 35, no. 4, pp. 743–747, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. C. Jaturapitakkul, K. Kiattikomol, V. Sata, and T. Leekeeratikul, “Use of ground coarse fly ash as a replacement of condensed silica fume in producing high-strength concrete,” Cement and Concrete Research, vol. 34, no. 4, pp. 549–555, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. I. Ceran, Injection of bases and laboratory injection experiments [M.S. thesis], Istanbul Technical University, Istanbul, Turkey, 1990.
  4. M. Incecik and A. Senol, “Recent developments in cement injection,” Journal of Istanbul Technical University, vol. 52, pp. 61–69, 1994. View at Google Scholar
  5. A. Ozocak, Injection model experiments with fine grained cement [M.S. thesis], Istanbul Technical University, Istanbul, Turkey, 1994.
  6. N. Su and Y.-N. Peng, “The characteristics and engineering properties of dry-mix/steam-injection concrete,” Cement and Concrete Research, vol. 31, no. 4, pp. 609–619, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. C. E. Ekinci, “The calculation methods of compound of concrete and a novel calculation method,” E-Journal of New World Sciences Academy, vol. 1, no. 1, pp. 1–12, 2006. View at Google Scholar
  8. S. Sawada, C. L. Page, and M. M. Page, “Electrochemical injection of organic corrosion inhibitors into concrete,” Corrosion Science, vol. 47, no. 8, pp. 2063–2078, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. C. E. Ekinci, Burgundy Book: Structure and Designer’s Construction Handbook, Universite Kitabevi, Elazig, Turkey, 2008.
  10. A. Çatal, Geo-Technical Applications in Atatürk Dam, Atak Ofset, Ankara, Turkey, 1993.
  11. T. C. Holland, A. Krysa, M. D. Luthet, and T. C. Liu, “Use of silica-fume concrete to repair abrasion-erosion damage in the Kinzua Dam Stilling Basin,” in Proceedings of the CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, vol. 91, no. 2, pp. 841–863, 1986.
  12. P. Jahren, “Use of silica fume in concrete,” in Proceedings of the CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, no. 1, pp. 625–642, 1983.
  13. I. Meland, “Influence of condensed silica fume and fly ash on the heat evolution in cement pastes,” in Proceedings of the 1st CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, vol. 79, no. 1, pp. 665–676, 1983. View at Publisher · View at Google Scholar
  14. M. A. Yeğinobalı, “Evaluation of silica fume as an additive in concrete,” in Symposium of the Use of Industrial Solid Wastes in Construction Sector, pp. 149–167, Bogazici University, Istanbul, Turkey, 1993.
  15. E. J. Sellevold and F. F. Radj, “Condensed silica fume (mikrosilica) in concrete: water and strength development,” in Proceedings of the 2nd CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, vol. 132, no. 1, pp. 677–694, 1983.
  16. C. E. Ekinci, Potential uses of Silica fumes from antalya etibank elektrometalurji industry as admixtures in Cement and Concrete [Ph.D. thesis], Firat University, Elazig, Turkey, 1995.
  17. O. E. Grojy, “Durability of concrete containing condensed silica fume,” in Proceedings of the 1st International Conference on the Use of Fly Ash, Silica Fume, Slag and Other Mineral by Products in Concrete, no. 1, pp. 695–708, 1983.
  18. A. Goldman and A. Bentur, “Bond effects in high-strength silica-fume concretes,” ACI Materials Journal, vol. 86, no. 5, pp. 440–447, 1989. View at Google Scholar · View at Scopus
  19. V. M. Malhotra, G. G. Carette, and V. Sivasundaram, “Role of silica fume in concrete: a review,” in Proceedings of the Symposium on Advanced in Concrete Technology, Athens, Greece, 1992.
  20. P.-C. Aitcin, V. M. Malhotra, G. G. Carette, M. F. Pistilli, and J. T. Wolsiefer, “Silica fume in concrete,” ACI Materials Journal, vol. 84, no. 2, pp. 158–166, 1987. View at Google Scholar · View at Scopus
  21. C. E. Ekinci and M. Ersimsek, “The research of physical properties of concrete which is containing granular ferrokrom slag which is produced by using the method of injection,” E-Journal of New World Sciences Academy, vol. 1, no. 3, pp. 67–74, 2006. View at Google Scholar
  22. TS3530 prEN 933-1, “Tests for Geometrical Properties of Aggregates Part 1: Determination of Particle Size Distribution-Granulometric Analysis (Sieving Method),” Turkish Standard Institute (Turkish Codes), Ankara, Turkey, 1997, (Turkish).
  23. TS706 EN 12620, “Aggregates for Concrete,” Turkish Standard Institute (Turkish Codes), Ankara, Turkey, 2009, (Turkish).
  24. M. Ersimsek, Investigation of the physical features of the concrete which contains the slag of granule ferrochrome produced by injection method [M.S. thesis], Firat University, Elazig, Turkey, 2006.
  25. TS3068 ISO2736, “Preparation and Maintenance of Experiment Samples in Laboratory,” Turkish Standard Institute (Turkish Codes), Ankara, Turkey, 1999, (Turkish).
  26. TSEN 12390-3, “Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens,” Turkish Standard Institute (Turkish Codes), Ankara, Turkey, 2003, (Turkish).
  27. TS3529 ISO6782, “Test Method for Determination of the Unit Weight of Aggregates for Concrete,” Turkish Standard Institute (Turkish Codes), Ankara, Turkey, 2009 (Turkish).