Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 263129, 2 pages
http://dx.doi.org/10.1155/2014/263129
Editorial

Production, Characterization, and Applications of Porous Materials

1Physical Metallurgy Laboratory, Mechanical Engineering Department, Aristotle University of Thessaloniki, P.O. Box 490, 54124 Thessaloniki, Greece
2Department of Mechanical Engineering, Frederick University, 1036 Nicosia, Cyprus
3National Research Council Canada, 75 de Mortagne, Boucherville, QC, Canada H1Y 2V9
4Department of Light Weight Design, Metal Foam Centre, Fraunhofer Institute for Machine Tools and Forming Technologies, 09126 Chemnitz, Germany
5Department of Materials Science and Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan

Received 6 July 2014; Accepted 6 July 2014; Published 12 August 2014

Copyright © 2014 Nikolaos Michailidis et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Michailidis, E. Smyrnaios, G. Maliaris, F. Stergioudi, and A. Tsouknidas, “Mechanical response and FEM modeling of porous Al under static and dynamic loads,” Advanced Engineering Materials, vol. 16, pp. 289–294, 2013. View at Google Scholar
  2. N. Michailidis and F. Stergioudi, “Establishment of process parameters for producing Al-foam by dissolution and powder sintering method,” Materials and Design, vol. 32, no. 3, pp. 1559–1564, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. N. Kanetake and M. Kobashi, “Innovative processing of porous and cellular materials by chemical reaction,” Scripta Materialia, vol. 54, no. 4, pp. 521–525, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Tsouknidas, “Friction induced wear of rapid prototyping generated materials: a review,” Advances in Tribology, vol. 2011, Article ID 746270, 7 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. E. Baril, L. P. Lefebvre, and S. A. Hacking, “Direct visualization and quantification of bone growth into porous titanium implants using micro computed tomography,” Journal of Materials Science: Materials in Medicine, vol. 22, no. 5, pp. 1321–1332, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Neugebauer and T. Hipke, “Dynamisches verhalten geschäumter bauteile,” Materialwissenschaft und Werkstofftechnik, vol. 31, no. 6, pp. 515–518, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. N. Michailidis, F. Stergioudi, K. Viglaki, and M. Chatzinikolaidou, “Production of novel ceramic porous surfaces tailored for bone tissue engineering,” CIRP Annals—Manufacturing Technology, vol. 63, no. 1, pp. 557–560, 2014. View at Publisher · View at Google Scholar