Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 405250, 8 pages
Research Article

Influence of Humidity on Fiber Bragg Grating Sensors

1Aeronautical Technologies Center (CTA), C/Juan de la Cierva, No.1 Parque Tecnológico de Álava, Miñano, 01510 Álava, Spain
2Department of Communications Engineering, Faculty of Engineering, University of the Basque Country (UPV/EHU), C/Alda. Urquijo S/N, 48013 Bilbao, Spain

Received 5 September 2013; Revised 18 November 2013; Accepted 19 November 2013; Published 22 January 2014

Academic Editor: Xinyong Dong

Copyright © 2014 Ander Montero et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Todd, L. Malsawma, C. C. Chang, and G. Johnson, “The use of FBG strain sensors in laboratory and field load tests: comparison to conventional resistive strain gages,” NRL/MR5673-99-8418, Naval Research Laboratory, Washington, DC, USA, 1999. View at Google Scholar
  2. M. D. Todd, Fiber optic Bragg grating-based sensing [Ph.D. thesis], Structural Engineering Department, University of California, San Diego, Calif, USA.
  3. H. Guo, G. Xiao, N. Mrad, and J. Yao, “Fiber optic sensors for structural health monitoring of air platforms,” Sensors, vol. 11, no. 4, pp. 3687–3705, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Zhou and J. Ou, “Techniques of temperature compensation for FBG strain sensors used in long-term structural monitoring,” in Proceedings of Asian Pacific Fundamental Problems of Opto and Microelectronics, pp. 465–471, Khabarovsk, Russia, September 2004.
  5. Micron Optics website,
  6. Micron Optics website,
  7. Ph. Giaccari, H. G. Limberger, and P. Kronenberg, “Influence of humidity and temperature on polyimide-coated fiber bragg gratings,” in Proceedings of the Bragg Gratings, Photosensitivity, and Poling in Glass Waveguides, pp. 1–6, Institute of Applied Optics, Stresa, Italy, July 2001.
  8. S. F. H. Correia, P. Antunes, E. Pecoraro et al., “Optical fiber relative humidity sensor based on a FBG with a Di-Ureasil coating,” Sensors, vol. 12, no. 7, pp. 8847–8860, 2012. View at Publisher · View at Google Scholar
  9. J. M. Ryan, R. Adams, and S. G. R. Brown, “Moisture ingress effect on properties of CFRP,” in Proceedings of the 17th International Conference on Composite Materials (ICCM '09), Edinburgh, UK, July 2009. View at Scopus
  10. B. de Nève and M. E. R. Shanahan, “Effects of humidity on an epoxy adhesive,” International Journal of Adhesion and Adhesives, vol. 12, no. 3, pp. 191–196, 1992. View at Google Scholar · View at Scopus