Research Article
Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill
Table 1
Factors and levels used in the experiments.
| Factors | Experimental condition levels |
1 |
2 |
3 |
| () Machined surface inclination angle (°) |
100 |
110 |
120 | () Axial depth of cut (mm) |
0.1 |
0.25 |
0.5 | () Spindle speed (min−1) |
3200 |
3700 |
4200 | () Feed rate (mm/min) |
870 |
920 |
970 |
|
|