Research Article
Mechanical Behaviors of Friction Stir Spot Welded Joints of Dissimilar Ferrous Alloys under Opening-Dominant Combined Loads
Table 1
The chemical compositions provided by the manufacturer and mechanical properties of SPCC and SUS 409L.
(a) |
| Chemical compositions (wt%) | | C | Mn | P | Si | S | S-AL | Fe |
| SPCC | 0.0361 | 0.205 | 0.015 | 0.019 | 0.006 | 0.037 | At balance |
|
|
(b) |
| Chemical compositions (wt%) | | C | Cr | Mn | P | Si | S | Ni | Ti | Fe |
| SUS 409L | ≤0.03 | 11.44 | ≤1.0 | ≤0.04 | ≤1.0 | ≤0.03 | ≤0.08 | ≤0.75 | At balance |
|
|
(c) |
| Mechanical properties | | Tensile strength (MPa) | Yield strength (MPa) | Elongation at fracture (%) |
| SPCC | 316.8 | 163.8 | 46 |
| SUS 409L | 494 | 236 | 36 |
|
|