Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 594984, 7 pages
http://dx.doi.org/10.1155/2014/594984
Research Article

Preparation of Al-Mg Alloy Electrodes by Using Powder Metallurgy and Their Application for Hydrogen Production

1Department of Mechanical Engineering, National Central University, Chung-Li 32054, Taiwan
2Department of Mechanical and Vehicle Engineering, Army Academy, Chung-Li 32092, Taiwan

Received 4 August 2014; Accepted 26 August 2014; Published 23 November 2014

Academic Editor: Chin-Chia Wu

Copyright © 2014 Wen-Nong Hsu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Wen-Nong Hsu, Teng-Shih Shih, and Ming-Yuan Lin, “Preparation of Al-Mg Alloy Electrodes by Using Powder Metallurgy and Their Application for Hydrogen Production,” Advances in Materials Science and Engineering, vol. 2014, Article ID 594984, 7 pages, 2014. doi:10.1155/2014/594984