Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 607429, 9 pages
http://dx.doi.org/10.1155/2014/607429
Research Article

The Role of Foaming Agent and Processing Route in Mechanical Performance of Fabricated Aluminum Foams

1Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev 03142, Ukraine
2Physical-Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev 03142, Ukraine
3Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577, Japan

Received 18 December 2013; Revised 4 March 2014; Accepted 5 March 2014; Published 31 March 2014

Academic Editor: Alexander Tsouknidas

Copyright © 2014 Alexandra Byakova et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Aprilia Erryani, Franciska Pramuji Lestari, Dhyah Annur, and Ika Kartika, “Preparation and characterization of coating sodium trisilicate (Na2O.nSiO2) at calcium carbonate (CaCO3) for blowing agent in Mg alloy foam,” vol. 1964, pp. 020002, . View at Publisher · View at Google Scholar
  • Zohair Sarajan, “A356 alloy foam fabrication by melting method using titanium hydride,” Metallurgical Research & Technology, vol. 112, no. 3, 2015. View at Publisher · View at Google Scholar
  • Francisco García-Moreno, “Commercial Applications of Metal Foams: Their Properties and Production,” Materials, vol. 9, no. 2, pp. 85, 2016. View at Publisher · View at Google Scholar
  • Zohair Sarajan, “Preparation of A356 Foam Aluminum by Means of Titanium Hydride,” Metal Science and Heat Treatment, 2017. View at Publisher · View at Google Scholar
  • O. V. Byakova, A. O. Vlasov, M. V. Semenov, O. V. Zatsarna, and S. V. Gnyloskurenko, “Mechanical Behaviour of the Porous and Foam Aluminium in Conditions of Compression: Determination of Key Mechanical Characteristics,” Metallofizika I Noveishie Tekhnologii, vol. 39, no. 10, pp. 1363–1375, 2017. View at Publisher · View at Google Scholar
  • Zhequn Huang, Kenji Date, Kiyoshi Tatsugawa, and Teiichi Ando, “Characterization of Al Skeletal Structures Fabricated by Ultrasonic Powder Consolidation,” Metallurgical and Materials Transactions A, 2018. View at Publisher · View at Google Scholar
  • Miguel Ángel Suarez-Rosales, Marlenne González-Nava, Alejandro Cruz-Ramírez, and María de los Ángeles Hernández Pérez, “Thermodynamic analysis of the aluminum alloy foaming process by melt route,” Journal of Manufacturing Processes, vol. 32, pp. 77–84, 2018. View at Publisher · View at Google Scholar