Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 612976, 10 pages
http://dx.doi.org/10.1155/2014/612976
Research Article

Free-Form Rapid Prototyped Porous PDMS Scaffolds Incorporating Growth Factors Promote Chondrogenesis

1Product Development Laboratory, Mechanical Engineering & Manufacturing Department, Universidad Politécnica de Madrid (UPM), c/José Gutiérrez Abascal 2, 28006 Madrid, Spain
2Departamento de Biología Molecular, Universidad Autónoma de Madrid, 28049 Cantoblanco, Madrid, Spain

Received 7 October 2013; Accepted 29 November 2013; Published 2 January 2014

Academic Editor: Alexander Tsouknidas

Copyright © 2014 Andrés Díaz Lantada et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Langer and J. P. Vacanti, “Tissue engineering,” Science, vol. 260, no. 5110, pp. 920–926, 1993. View at Google Scholar · View at Scopus
  2. W. E. Thomas, D. E. Discher, and V. Prasad Shastri, “Mechanical regulation of cells by materials and tissues,” MRS Bulletin, vol. 35, no. 8, pp. 578–583, 2010. View at Google Scholar · View at Scopus
  3. W. L. K. Chen, M. Likhitpanichkul, A. Ho, and C. A. Simmons, “Integration of statistical modeling and high-content microscopy to systematically investigate cell-substrate interactions,” Biomaterials, vol. 31, no. 9, pp. 2489–2497, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Buxboim and D. E. Discher, “Stem cells feel the difference,” Nature Methods, vol. 7, no. 9, pp. 695–697, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Díaz Lantada, Handbook of Advanced Design and Manufacturing Technologies for Biodevices, Springer, 2013.
  6. P. J. S. Bartolo, H. Almeida, and T. Laoui, “Rapid prototyping and manufacturing for tissue engineering scaffolds,” International Journal of Computer Applications in Technology, vol. 36, no. 1, pp. 1–9, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Y. Tan, C. K. Chua, and K. F. Leong, “Indirect fabrication of gelatin scaffolds using rapid prototyping technology,” Virtual and Physical Prototyping, vol. 5, no. 1, pp. 45–53, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. A. K. Ekaputra, Y. Zhou, S. M. Cool, and D. W. Hutmacher, “Composite electrospun scaffolds for engineering tubular bone grafts,” Tissue Engineering A, vol. 15, no. 12, pp. 3779–3788, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Lohfeld, M. A. Tyndyk, S. Cahill, N. Flaherty, V. Barron, and P. E. McHugh, “A method to fabricate small features on scaffolds for tissue engineering via selective laser sintering,” Journal of Biomedical Science and Engineering, vol. 3, p. 138, 2010. View at Google Scholar
  10. R. Tzezana, E. Zussman, and S. Levenberg, “A layered ultra-porous scaffold for tissue engineering, created via a hydrospinning method,” Tissue Engineering C, vol. 14, no. 4, pp. 281–288, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Díaz-Lantada, A. Mosquera, J. L. Endrino, and P. Lafont, “Design and rapid prototyping of DLC coated fractal surfaces for tissue engineering applications,” Journal of Physics, vol. 252, no. 1, Article ID 012003, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Stampfl, H. Fouad, S. Seidler et al., “Fabrication and moulding of cellular materials by rapid prototyping,” International Journal of Materials and Product Technology, vol. 21, no. 4, pp. 285–296, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Infuehr, N. Pucher, C. Heller et al., “Functional polymers by two-photon 3D lithography,” Applied Surface Science, vol. 254, no. 4, pp. 836–840, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. P. S. Maher, R. P. Keatch, K. Donnelly, and J. Z. Paxton, “Formed 3D bio-scaffolds via rapid prototyping technology,” in Proceedings of the 4th European Conference of the International Federation for Medical and Biological Engineering (ECIFMBE '08), vol. 22, pp. 2200–2204, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. G. E. Ryan, A. S. Pandit, and D. P. Apatsidis, “Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique,” Biomaterials, vol. 29, no. 27, pp. 3625–3635, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. P. H. Warnke, T. Douglas, P. Wollny et al., “Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering,” Tissue Engineering C, vol. 15, no. 2, pp. 115–124, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Stampfl, S. Baudis, C. Heller et al., “Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography,” Journal of Micromechanics and Microengineering, vol. 18, no. 12, Article ID 125014, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Manjubala, A. Woesz, C. Pilz et al., “Biomimetic mineral-organic composite scaffolds with controlled internal architecture,” Journal of Materials Science, vol. 16, no. 12, pp. 1111–1119, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, and F. Varga, “Evaluation of biocompatible photopolymers—I: photoreactivity and mechanical properties of reactive diluents,” Journal of Macromolecular Science A, vol. 44, no. 5, pp. 547–557, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, and F. Varga, “Evaluation of biocompatible photopolymers—II: further reactive diluents,” Monatshefte fur Chemie, vol. 138, no. 4, pp. 261–268, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Jung, C. Wischke, and A. Lendlein, “Degradable, multifunctional cardiovascular implants: challenges and hurdles,” MRS Bulletin, vol. 35, no. 8, pp. 607–613, 2010. View at Google Scholar · View at Scopus
  22. J. Y. Tan, C. K. Chua, and K. F. Leong, “Fabrication of channeled scaffolds with ordered array of micro-pores through microsphere leaching and indirect rapid prototyping technique,” Biomedical Microdevices, vol. 15, p. 83, 2013. View at Google Scholar
  23. C. K. F. Chan, C.-C. Chen, C. A. Luppen et al., “Endochondral ossification is required for haematopoietic stem-cell niche formation,” Nature, vol. 457, no. 7228, pp. 490–494, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. T. P. Richardson, M. C. Peters, A. B. Ennett, and D. J. Mooney, “Polymeric system for dual growth factor delivery,” Nature Biotechnology, vol. 19, no. 11, pp. 1029–1034, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Perets, Y. Baruch, F. Weisbuch, G. Shoshany, G. Neufeld, and S. Cohen, “Enhancing the vascularization of three-dimensional porous alginate scaffolds by incorporating controlled release basic fibroblast growth factor microspheres,” Journal of Biomedical Materials Research A, vol. 65, no. 4, pp. 489–497, 2003. View at Google Scholar · View at Scopus
  26. M. W. Laschke, M. Rücker, G. Jensen et al., “Incorporation of growth factor containing Matrigel promotes vascularization of porous PLGA scaffolds,” Journal of Biomedical Materials Research A, vol. 85, no. 2, pp. 397–407, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Chen, R. Zjang, and W. Wang, Fabricating Microporous PDMS Using Water-in-PDMS Emulsion, RSC Publishing Blogs Home. Chips and Tips, 2012.
  28. S. Peng, P.G. Hartley, T.C. Hughes, and Q. Guo, “Controlling morphology and porosity of porous siloxane membranes through water content of precursor microemulsion,” Soft Maters, vol. 8, no. 40, p. 10493, 2012. View at Google Scholar
  29. P. K. Yuen, H. Su, V. N. Goral, and K. A. Fink, “Three-dimensional interconnected microporous poly(dimethylsiloxane) microfluidic devices,” Lab on a Chip, vol. 11, no. 8, pp. 1541–1544, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. Q. Tan, S. Li, J. Ren, and C. Chen, “Fabrication of porous scaffolds with a controllable microstructure and mechanical properties by porogen fusion technique,” International Journal of Molecular Sciences, vol. 12, no. 2, pp. 890–904, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. F. Ciaramella, V. Jousseaume, S. Maitrejean, B. Rémiat, M. Verdier, and G. Passemard, “Mechanical properties of porous MSQ films: impact of the porogen loading and matrix crosslinking,” in Proceedings of the Materials Research Society Spring Meeting, pp. 17–22, April 2005. View at Scopus
  32. W. Y. Yeong, N. Sudarmadji, H. Y. Yu et al., “Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering,” Acta Biomaterialia, vol. 6, no. 6, pp. 2028–2034, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Díaz Lantada, R. D. Valle-Fernández, P. L. Morgado et al., “Development of personalized annuloplasty rings: combination of CT images and CAD-CAM tools,” Annals of Biomedical Engineering, vol. 38, no. 2, pp. 280–290, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. M. F. Pittenger, A. M. Mackay, S. C. Beck et al., “Multilineage potential of adult human mesenchymal stem cells,” Science, vol. 284, no. 5411, pp. 143–147, 1999. View at Publisher · View at Google Scholar · View at Scopus
  35. D. P. Lennon, S. E. Haynesworth, S. P. Bruder, N. Jaiswal, and A. I. Caplan, “Human and animal mesenchymal progenitor cells from bone marrow: identification of serum for optimal selection and proliferation,” In Vitro Cellular and Developmental Biology, vol. 32, no. 10, pp. 602–611, 1996. View at Google Scholar · View at Scopus
  36. S. Ogueta, J. Muñoz, E. Obregon, E. Delgado-Baeza, and J. P. García-Ruiz, “Prolactin is a component of the human synovial liquid and modulates the growth and chondrogenic differentiation of bone marrow-derived mesenchymal stem cells,” Molecular and Cellular Endocrinology, vol. 190, no. 1-2, pp. 51–63, 2002. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Romero-Prado, C. Blázquez, C. Rodríguez-Navas et al., “Functional characterization of human mesenchymal stern cells that maintain osteochondral fates,” Journal of Cellular Biochemistry, vol. 98, no. 6, pp. 1457–1470, 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. A. Javed, B. Guo, S. Hiebert et al., “Groucho/TLE/R-esp proteins associate with the nuclear matrix and repress RUNX (CBFα/AML/PEBP2α) dependent activation of tissue-specific gene transcription,” Journal of Cell Science, vol. 113, no. 12, pp. 2221–2231, 2000. View at Google Scholar · View at Scopus
  39. J. Normatov and M. S. Silverstein, “Porous interpenetrating network hybrids synthesized within high internal phase emulsions,” Polymer, vol. 48, no. 22, pp. 6648–6655, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. J. Y. Wong and J.D. Bronzino, Biomaterials, CRC-Press, 2007.
  41. F. J. Rojo, J.M. Atienza, E. Jorge-Herrero, J.M. García-Páez, and G.V. Guinea, “Resistencia a tracción de membranas de pericardio para válvulas cardiacas biológicas,” Anales de Mecánica de la Fractura, vol. 26, no. 1, 2009. View at Google Scholar
  42. R. K. Goyal, P. Biancani, A. Phillips, and H.M. Spiro, Mechanical Properties of the Esophageal Wall, Yale University, 1971.
  43. I. Levental, P. C. Georges, and P. A. Janmey, “Soft biological materials and their impact on cell function,” Soft Matter, vol. 3, no. 3, pp. 299–306, 2007. View at Publisher · View at Google Scholar · View at Scopus
  44. J. M. Mansour, “Biomechanics of cartilage,” in Kinesiology: The Mechanics and Pathomechanics of Human Movement, C. A. Oatis, Ed., Lippincott Williams and Wilkins, 2003. View at Google Scholar
  45. A. Tsouknidas, A. Lontos, S. Savvakis, and N. Michailidis, “Nonintrusive 3D reconstruction of human bone models to simulate the biomechanical response,” 3D Research Express, vol. 3, no. 2, p. 5, 2012. View at Google Scholar