Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 686474, 10 pages
http://dx.doi.org/10.1155/2014/686474
Research Article

The Influence of Nickel and Tin Additives on the Microstructural and Mechanical Properties of Al-Zn-Mg-Cu Alloys

1School of Materials Engineering, University Malaysia Perils, Taman Muhibbah, 02600 Jejawi, Perlis, Malaysia
2College of Engineering, Al-Muthana University, Al-Muthana, Iraq

Received 16 October 2013; Accepted 3 January 2014; Published 19 February 2014

Academic Editor: Pavel Lejcek

Copyright © 2014 Haider T. Naeem et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Haider T. Naeem, Kahtan S. Mohammed, Khairel R. Ahmad, and Azmi Rahmat, “The Influence of Nickel and Tin Additives on the Microstructural and Mechanical Properties of Al-Zn-Mg-Cu Alloys,” Advances in Materials Science and Engineering, vol. 2014, Article ID 686474, 10 pages, 2014. doi:10.1155/2014/686474