Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 703194, 6 pages
http://dx.doi.org/10.1155/2014/703194
Research Article

Effects of Sb2O3 on the Mechanical Properties of the Borosilicate Foam Glasses Sintered at Low Temperature

1Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China
2School of Electronic Information Engineering, Tianjin University, Tianjin 300072, China
3Tianjin Municipal Engineering Design & Research Institute, Tianjin 300051, China
4State Key Laboratory of Transient Optics and Photonics, Institute of Advanced Materials, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China

Received 15 September 2014; Revised 8 December 2014; Accepted 9 December 2014; Published 28 December 2014

Academic Editor: Hao Wang

Copyright © 2014 Chenxi Zhai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Hasheminia, A. Nemati, B. E. Yekta, and P. Alizadeh, “Preparation and characterisation of diopside-based glass-ceramic foams,” Ceramics International, vol. 38, no. 3, pp. 2005–2010, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Chen, X. Li, D. Lv, F. Yu, Z. Yin, and T. Wu, “Study on microwave absorption properties of metal-containing foam glass,” Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 176, no. 15, pp. 1239–1242, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Li, D. Lv, and K. Chen, “Effects of graphite additive on dielectric properties and microwave absorption properties of zinc-containing foam glass,” Journal of Non-Crystalline Solids, vol. 358, no. 21, pp. 2917–2921, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Dong, X. Liu, Q. Ma, and G. Meng, “Preparation of cordierite-based porous ceramic micro-filtration membranes using waste fly ash as the main raw materials,” Journal of Membrane Science, vol. 285, no. 1-2, pp. 173–181, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. G. X. Chen, S. Y. Gao, and H. W. Guo, “Strengthening techniques of foam glass,” Materials Review, vol. 25, pp. 112–115, 2011. View at Google Scholar
  6. L. Lakov, K. Toncheva, A. Staneva, T. Simeonova, and Z. Ilcheva, “Composition, synthesis and properties of insulation foam glass obtained from packing glass waste,” Journal of Chemical Technology and Metallurgy, vol. 48, no. 2, pp. 125–129, 2013. View at Google Scholar · View at Scopus
  7. A. S. Llaudis, M. J. O. Tari, F. J. G. Ten, E. Bernardo, and P. Colombo, “Foaming of flat glass cullet using Si3N4 and MnO2 powders,” Ceramics International, vol. 35, no. 5, pp. 1953–1959, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Koudelka, J. Šubčík, P. Mošner, L. Montagne, and L. Delevoye, “Structure and properties of Sb2O3-containing zinc borophosphate glasses,” Journal of Non-Crystalline Solids, vol. 353, no. 18–21, pp. 1828–1833, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. Y.-C. Liao and C.-Y. Huang, “Glass foam from the mixture of reservoir sediment and Na2CO3,” Ceramics International, vol. 38, no. 5, pp. 4415–4420, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. D. U. Tulyaganov, H. R. Fernandes, S. Agathopoulos, and J. M. F. Ferreira, “Preparation and characterization of high compressive strength foams from sheet glass,” Journal of Porous Materials, vol. 13, no. 2, pp. 133–139, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Méar, P. Yot, and M. Ribes, “Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste funnel glasses,” Materials Letters, vol. 60, no. 7, pp. 929–934, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Chen, K. Wang, X. Chen, and A. Lu, “Study of foam glass with high content of fly ash using calcium carbonate as foaming agent,” Materials Letters, vol. 79, pp. 263–265, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. A. A. Francis and M. K. Abdel Rahman, “Structure characterization and optimization of process parameters on compressive properties of glass-based foam composites,” Environmental Progress & Sustainable Energy, vol. 33, no. 3, pp. 800–807, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Bernardo and F. Albertini, “Glass foams from dismantled cathode ray tubes,” Ceramics International, vol. 32, no. 6, pp. 603–608, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. H. R. Fernandes, D. U. Tulyaganov, and J. M. F. Ferreira, “Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents,” Ceramics International, vol. 35, no. 1, pp. 229–235, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. H. W. Guo, Y. X. Gong, and S. Y. Gao, “Preparation of high strength foam glass-ceramics from waste cathode ray tube,” Materials Letters, vol. 64, no. 8, pp. 997–999, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. R. Taurino, I. Lancellotti, L. Barbieri, and C. Leonelli, “Glass-ceramic foams from borosilicate glass waste,” International Journal of Applied Glass Science, vol. 5, no. 2, pp. 136–145, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Lv, X. Li, L. Wang, J. Du, and J. Zhang, “Effect of carbon as foaming agent on pore structure of foam glass,” Advanced Materials Research, vol. 105-106, no. 1, pp. 765–768, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Du, Study on Preparation Technique and Performance of Borosilicate Foam Glass, Tianjin University, Tianjin, China, 2007.
  20. Z. Y. Fan and L. Song, “Study on foam glass burned from gain-calcium dregs,” Natural Sciences Journal of Harbin Normal University, vol. 18, pp. 20–23, 2002. View at Google Scholar
  21. Q. F. Shen, S. H. Zhang, C. J. Shen, Y. F. Zhang, and Y. H. Qiang, “Effect of auxiliary additive agents on properties of foam glass,” Materials Review, vol. 22, pp. 336–338, 2008. View at Google Scholar
  22. K.-Y. Lim, Y.-W. Kim, and I.-H. Song, “Low-temperature processing of porous SiC ceramics,” Journal of Materials Science, vol. 48, no. 5, pp. 1973–1979, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Zhao, Y. Zhu, Z. Li, and X. Lv, “Effect of Bi2O3 on physical properties of vitrified bond and mechanical properties of diamond composites,” Materials Science and Engineering A, vol. 568, pp. 102–107, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Meille, M. Lombardi, J. Chevalier, and L. Montanaro, “Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior,” Journal of the European Ceramic Society, vol. 32, no. 15, pp. 3959–3967, 2012. View at Publisher · View at Google Scholar · View at Scopus