Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 746252, 13 pages
http://dx.doi.org/10.1155/2014/746252
Review Article

Perspectives for Titanium-Derived Fillers Usage on Denture Base Composite Construction: A Review Article

1Department of Mechanical & Materials Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia
2Department of Dental Technology, College of Medical Technology, P.O. Box 1458, Misurata, Libya

Received 8 February 2014; Revised 15 June 2014; Accepted 15 June 2014; Published 2 July 2014

Academic Editor: Krishnan Jayaraman

Copyright © 2014 Nidal W. Elshereksi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Tandon, S. Gupta, and S. K. Agarwal, “Denture base materials: from past to future,” Indian Journal of Dental Sciences, vol. 2, no. 2, pp. 33–39, 2010. View at Google Scholar
  2. D. C. Jagger, A. Harrison, and K. D. Jandt, “The reinforcement of dentures,” Journal of Oral Rehabilitation, vol. 26, no. 3, pp. 185–194, 1999. View at Publisher · View at Google Scholar · View at Scopus
  3. W. J. O'Brien, Dental Materials and Their Selection, Quintessence, Hanover Park, Ill, USA, 3rd edition, 2002.
  4. S. S. Mirsasaani, M. H. Manjili, and N. Baheiraei, “Dental nanomaterials,” in Advances in Diverse Industrial Applications of Nanocomposites, B. Reddy, Ed., pp. 441–474, InTech, Rijeka, Croatia, 2011. View at Google Scholar
  5. K.-J. M. Söderholm, R. Mukherjee, and J. Longmate, “Filler leachability of composites stored in distilled water or artificial saliva,” Journal of Dental Research, vol. 75, no. 9, pp. 1692–1699, 1996. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Zhou, J. L. Drummond, and L. Hanley, “Barium and strontium leaching from aged glass particle/resin matrix dental composites,” Dental Materials, vol. 21, no. 2, pp. 145–155, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Kitayama, T. Nikaido, R. Maruoka et al., “Effect of an internal coating technique on tensile bond strengths of resin cements to zirconia ceramics,” Dental Materials Journal, vol. 28, no. 4, pp. 446–453, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Y. K. Lung and J. P. Matinlinna, “Aspects of silane coupling agents and surface conditioning in dentistry: an overview,” Dental Materials, vol. 28, no. 5, pp. 467–477, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. M. V. Kumar, S. Bhagath, and J. B. Jei, “Historical interest of denture base materials,” Journal of Dental Sciences, vol. 1, no. 1, pp. 103–105, 2010. View at Google Scholar
  10. G. A. V. M. Geerts, J. Overturf, and T. G. Oberholzer, “The effect of different reinforcements on the fracture toughness of materials for interim restorations,” Journal of Prosthetic Dentistry, vol. 99, no. 6, pp. 461–467, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. S. M. Lee, Advances in Biomaterials, Technomic, Lancaster, Calif, USA, 1987.
  12. T. G. Tihan, M. D. Ionita, R. G. Popescu, and D. Iordachescu, “Effect of hydrophilic-hydrophobic balance on biocompatibility of poly(methyl methacrylate) (PMMA)-hydroxyapatite (HA) composites,” Materials Chemistry and Physics, vol. 118, no. 2-3, pp. 265–269, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. R. K. Alla, S. Sajjan, V. R. Alluri, and K. Ginjupalli, “Influence of fiber reinforcement on the properties of denture base resins,” Journal of Biomaterials and Nanobiotechnology, vol. 4, pp. 91–97, 2013. View at Google Scholar
  14. S. H. Mohamed, A. M. Al-Jadi, and T. Ajaal, “Using of HPLC analysis for evaluation of residual monomer content in denture base material and their effect on mechanical properties,” Journal of Physical Science, vol. 19, no. 2, pp. 127–135, 2008. View at Google Scholar
  15. M. G. Reeson and N. J. Jepson, “Achieving an even thickness in heat-polymerized permanent acrylic resin denture bases for complete dentures,” The Journal of Prosthetic Dentistry, vol. 82, no. 3, pp. 359–361, 1999. View at Publisher · View at Google Scholar · View at Scopus
  16. R. N. Rached, J. M. Powers, and A. A. D. B. Cury, “Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins,” The Journal of Prosthetic Dentistry, vol. 92, no. 1, pp. 79–82, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. N. Anil, C. Hekimoglu, and S. Sahin, “Color stability of heat-polymerized and autopolymerized soft denture liners,” Journal of Prosthetic Dentistry, vol. 81, no. 4, pp. 481–484, 1999. View at Publisher · View at Google Scholar · View at Scopus
  18. C. V. Machado, C. B. Fortes, F. M. Collares, M. M. C. Forte, and S. M. W. Samuel, “Effect of different curing condition on material properties of acrylic resin for orthodontic appliances,” Orthodontic Waves, vol. 69, no. 1, pp. 18–22, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. J. L. Ferracane, Materials in Dentistry; Principles and Applications, Lippincott Williams & Wilkins, Philadelphia, Pa, USA, 2nd edition, 2001.
  20. S. W. Shalaby and U. Salz, Polymers for Dental and Orthopedic Applications, CRC Press, New York, NY, USA, 2007.
  21. N. Tanoue, K. Nagano, and H. Matsumura, “Use of a light-polymerized composite removable partial denture base for a patient hypersensitive to poly(methyl methacrylate), polysulfone, and polycarbonate: a clinical report,” Journal of Prosthetic Dentistry, vol. 93, no. 1, pp. 17–20, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Palitsch, M. Hannig, P. Ferger, and M. Balkenhol, “Bonding of acrylic denture teeth to MMA/PMMA and light-curing denture base materials: the role of conditioning liquids,” Journal of Dentistry, vol. 40, no. 3, pp. 210–221, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. C.-P. Lai, M.-H. Tsai, M. Chen, H.-S. Chang, and H.-H. Tay, “Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath,” Dental Materials, vol. 20, no. 2, pp. 133–141, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. W. L. Tham, W. S. Chow, and Z. A. Mohd Ishak, “Effects of titanate coupling agent on the mechanical, thermal, and morphological properties of poly(methyl methacrylate)/hydroxyapatite denture base composites,” Journal of Composite Materials, vol. 45, no. 22, pp. 2335–2345, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Yilmaz and T. Korkmaz, “The reinforcement effect of nano and microfillers on fracture toughness of two provisional resin materials,” Materials and Design, vol. 28, no. 7, pp. 2063–2070, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. B. C. Young, A comparison of polymeric denture base materials [M.S. thesis], University of Glasgow, Glasgow, UK, 2010.
  27. J. N. Arioli Filho, L. E. Butignon, R. D. P. Pereira, M. G. Lucas, and F. D. A. Mollo Jr., “Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization,” Journal of Applied Oral Science, vol. 19, no. 3, pp. 249–253, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. D.-W. Jung, S.-T. Noh, and Y.-W. Chang, “Toughening of PMMA with PU/PMMA composite particles,” Journal of Industrial and Engineering Chemistry, vol. 4, no. 2, pp. 135–139, 1998. View at Google Scholar · View at Scopus
  29. R. L. Sakaguchi and J. M. Powers, Craig’s Restorative Dental Materials, Elsevier, Mosby, 13th edition, 2012.
  30. W. Lien and K. S. Vandewalle, “Physical properties of a new silorane-based restorative system,” Dental Materials, vol. 26, no. 4, pp. 337–344, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. Z. Tarle, D. Marović, and V. Panduric, “Contemporary concepts on composite,” Rad 514 Medical Sciences, vol. 38, pp. 23–38, 2012. View at Google Scholar
  32. S. M. Z. Khaled, R. J. Miron, D. W. Hamilton, P. A. Charpentier, and A. S. Rizkalla, “Reinforcement of resin based cement with titania nanotubes,” Dental Materials, vol. 26, no. 2, pp. 169–178, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. R. G. Carrodeguas, B. V. Lasa, and J. S. R. Barrio, “Injectable acrylic bone cements for vertebroplasty with improved properties,” Journal of Biomedical Materials Research. Part B, vol. 68, no. 1, pp. 94–104, 2004. View at Google Scholar
  34. S. M. Zebarjad, S. A. Sajjadi, T. E. Sdrabadi, A. Yaghmaei, and B. Naderi, “A study on mechanical properties of PMMA/hydroxyapatite nanocomposite,” Engineering, vol. 3, no. 8, pp. 795–801, 2011. View at Publisher · View at Google Scholar
  35. R. Mosharraf and N. Mechanic, “Comparison of the effects of four pre-bonding preparation methods on the bond strength between a multilithic tooth and denture base resin,” Dental Research Journal, vol. 4, no. 2, pp. 102–105, 2007. View at Google Scholar
  36. N. W. Elshereksi, S. H. Mohamed, A. Arifin, and Z. A. Mohd Ishak, “The environmental characterization and leachability of denture base poly (methyl methacrylate) filled barium titanate,” Journal of Basic and Applied Science, vol. 1, pp. 23–30, 2007. View at Google Scholar
  37. T. K. Mowade, S. P. Dange, M. B. Thakre, and V. D. Kamble, “Effect of fiber reinforcement on impact strength of heat polymerized polymethyl methacrylate denture base resin: in vitro study and SEM analysis,” Journal of Advanced Prosthodontics, vol. 4, no. 1, pp. 30–36, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. J. Nguyen, V. Migonney, N. D. Ruse, and M. Sadoun, “Resin composite blocks via high-pressure high-temperature polymerization,” Dental Materials, vol. 28, no. 5, pp. 529–534, 2012. View at Publisher · View at Google Scholar · View at Scopus
  39. D. Vojvodić, F. Matejiček, Z. Schauperl, K. Mehulić, I. Bagić-Čuković, and S. Šegović, “Flexural strength of E-glass fiber reinforced dental polymer and dental high impact strength resin,” Strojarstvo, vol. 50, no. 4, pp. 221–230, 2008. View at Google Scholar · View at Scopus
  40. J. Jancar, K. Hynstova, and V. Pavelka, “Toughening of denture base resin with short deformable fibers,” Composites Science and Technology, vol. 69, no. 3-4, pp. 457–462, 2009. View at Publisher · View at Google Scholar · View at Scopus
  41. S.-H. Yu, Y. Lee, S. Oh, H.-W. Cho, Y. Oda, and J.-M. Bae, “Reinforcing effects of different fibers on denture base resin based on the fiber type, concentration, and combination,” Dental Materials Journal, vol. 31, no. 6, pp. 1039–1046, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. G. Uzun, N. Hersek, and T. Tinçer, “Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin,” The Journal of Prosthetic Dentistry, vol. 81, no. 5, pp. 616–620, 1999. View at Publisher · View at Google Scholar · View at Scopus
  43. T. K. Mowade, S. P. Dange, M. B. Thakre, and V. D. Kamble, “Effect of fiber reinforcement on impact strength of heat polymerized polymethyl methacrylate denture base resin: in vitro study and SEM analysis,” Journal of Advanced Prosthodontics, vol. 4, no. 1, pp. 30–36, 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. Y. Xia, F. Zhang, H. Xie, and N. Gu, “Nanoparticle-reinforced resin-based dental composites,” Journal of Dentistry, vol. 36, no. 6, pp. 450–455, 2008. View at Publisher · View at Google Scholar · View at Scopus
  45. A. A. Zandinejad, M. Atai, and A. Pahlevan, “The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites,” Dental Materials, vol. 22, no. 4, pp. 382–387, 2006. View at Publisher · View at Google Scholar · View at Scopus
  46. N. W. Elshereksi, S. H. Mohamed, A. Arifin, and Z. A. Mohd Ishak, “Thermal characterization of denture base poly (methyl methacrylate) filled barium titanate,” Journal of Physical Science. In press.
  47. H. D. Stipho, “Repair of acrylic resin denture base reinforced with glass fiber,” The Journal of Prosthetic Dentistry, vol. 80, no. 5, pp. 546–550, 1998. View at Publisher · View at Google Scholar · View at Scopus
  48. G. Lewis and S. Mladsi, “Correlation between impact strength and fracture toughness of PMMA-based bone cements,” Biomaterials, vol. 21, no. 8, pp. 775–781, 2000. View at Publisher · View at Google Scholar · View at Scopus
  49. G. Zappini, A. Kammann, and W. Wachter, “Comparison of fracture tests of denture base materials,” The Journal of Prosthetic Dentistry, vol. 90, no. 6, pp. 578–585, 2003. View at Publisher · View at Google Scholar · View at Scopus
  50. L. Musanje and B. W. Darvell, “Aspects of water sorption from the air, water and artificial saliva in resin composite restorative materials,” Dental Materials, vol. 19, no. 5, pp. 414–422, 2003. View at Publisher · View at Google Scholar · View at Scopus
  51. A. S. Kareem and R. H. Jehad, “An evaluation of water absorption of Giomer in comparison to other resin-based restorative materials,” Journal of Baghdad College Dentistry, vol. 24, pp. 25–28, 2012. View at Google Scholar
  52. S. B. Berger, A. R. M. Palialol, V. Cavalli, and M. Giannini, “Characterization of water sorption, solubility and filler particles of light-cured composite resins,” Brazilian Dental Journal, vol. 20, no. 4, pp. 314–318, 2009. View at Google Scholar · View at Scopus
  53. M. Zhang and J. P. Matinlinna, “E-glass fiber reinforced composites in dental applications,” Silicon, vol. 4, no. 1, pp. 73–78, 2012. View at Publisher · View at Google Scholar · View at Scopus
  54. S. Bose and P. A. Mahanwar, “Effects of titanate coupling agent on the properties of mica-reinforced nylon-6 composites,” Polymer Engineering & Science, vol. 45, no. 11, pp. 1479–1486, 2005. View at Publisher · View at Google Scholar · View at Scopus
  55. J. P. Matinlinna and P. K. Vallittu, “Silane based concepts on bonding resin composite to metals,” Journal of Contemporary Dental Practice, vol. 8, no. 2, pp. 1–13, 2007. View at Google Scholar · View at Scopus
  56. M. U. Jurczyk, K. Jurczyk, K. Niespodziana, and A. Miklaszewski, “Titanium-SiO2 nanocomposites and their scaffolds for dental applications,” Materials Characterization, vol. 77, pp. 99–108, 2013. View at Publisher · View at Google Scholar · View at Scopus
  57. P. Chaijareenont, H. Takahashi, N. Nishiyama, and M. Arksornnukit, “Effect of different amounts of 3-methacryloxypropyltrimethoxysilane on the flexural properties and wear resistance of alumina reinforced PMMA,” Dental Materials Journal, vol. 31, no. 4, pp. 623–628, 2012. View at Publisher · View at Google Scholar · View at Scopus
  58. L. Wei, N. Hu, and Y. Zhang, “Synthesis of polymer—mesoporous silica nanocomposites,” Journal of Materials, vol. 3, pp. 4066–4079, 2010. View at Google Scholar
  59. M. M. Karabela and I. D. Sideridou, “Synthesis and study of physical properties of dental light-cured nanocomposites using different amounts of a urethane dimethacrylate trialkoxysilane coupling agent,” Dental Materials, vol. 27, no. 11, pp. 1144–1152, 2011. View at Publisher · View at Google Scholar · View at Scopus
  60. I. D. Sideridou and M. M. Karabela, “Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocomposites,” Dental Materials, vol. 25, no. 11, pp. 1315–1324, 2009. View at Publisher · View at Google Scholar · View at Scopus
  61. T. Hooshmand, J. P. Matinlinna, A. Keshvad, S. Eskandarion, and F. Zamani, “Bond strength of a dental leucite-based glass ceramic to a resin cement using different silane coupling agents,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 17, pp. 327–332, 2012. View at Publisher · View at Google Scholar · View at Scopus
  62. S. L. K. S. Naveen, M. G. J. P. Singh, M. Col, C. M. Viswambaran, R. K. Col, and C. R. K. Dhiman, “Evaluation of flexural strength of resin interim restorations impregnated with various types of silane treated and untreated glass fibres,” Medical Journal Armed Forces India, 2012. View at Publisher · View at Google Scholar
  63. M. M. Karabela and I. D. Sideridou, “Synthesis and study of properties of dental resin composites with different nanosilica particles size,” Dental Materials, vol. 27, no. 8, pp. 825–835, 2011. View at Publisher · View at Google Scholar · View at Scopus
  64. S. Lin, Q. Cai, J. Ji et al., “Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation,” Composites Science and Technology, vol. 68, no. 15-16, pp. 3322–3329, 2008. View at Publisher · View at Google Scholar · View at Scopus
  65. S. K. Jun, D. A. Kim, H. J. Goo, and H. H. Lee, “Investigation of the correlation between the different mechanical properties of resin composites,” Dental Materials Journal, vol. 32, no. 1, pp. 48–57, 2013. View at Publisher · View at Google Scholar · View at Scopus
  66. T. Heikkinen, Bonding of composite resin to alumina and zirconia ceramics with special emphasis on surface conditioning and use of coupling agents [M.S. thesis], University of Turku, Turku, Finland, 2011.
  67. M. Özcan, P. Alander, P. K. Valittue, M.-C. Huysmans, and W. Kalk, “Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites,” Journal of Materials Science: Materials in Medicine, vol. 16, no. 1, pp. 21–27, 2005. View at Google Scholar
  68. R. Lakes, “Composite biomaterials,” in The Biomedical Engineering Handbook, D. J. Bronzino, Ed., chapter 41, pp. 1–13, CRC Press, New York, NY, USA, 3rd edition, 2006. View at Google Scholar
  69. J. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “The effect of three silane coupling agents and their blends with a cross-linker silane on bonding a bis-GMA resin to silicatized titanium (a novel silane system),” Journal of Dentistry, vol. 34, no. 10, pp. 740–746, 2006. View at Publisher · View at Google Scholar · View at Scopus
  70. C. M. Vaz, R. L. Reis, and A. M. Cunha, “Use of coupling agents to enhance the interfacial interactions in starch-EVOH/hydroxylapatite composites,” Biomaterials, vol. 23, no. 2, pp. 629–635, 2002. View at Publisher · View at Google Scholar · View at Scopus
  71. C. Schmidt and N. Ilie, “The mechanical stability of nano-hybrid composites with new methacrylate monomers for matrix compositions,” Dental Materials, vol. 28, no. 2, pp. 152–159, 2012. View at Publisher · View at Google Scholar · View at Scopus
  72. G. Guo, Y. Fan, J. Zhang, J. L. Hagan, and X. Xu, “Novel dental composites reinforced with zirconia-silica ceramic nanofibers,” Dental Materials, vol. 28, no. 4, pp. 360–368, 2012. View at Publisher · View at Google Scholar · View at Scopus
  73. M. Hashimoto, H. Ohno, M. Kaga, H. Sano, K. Endo, and H. Oguchi, “The extent to which resin can infiltrate dentin by acetone-based adhesives,” Journal of Dental Research, vol. 81, no. 1, pp. 74–78, 2002. View at Publisher · View at Google Scholar · View at Scopus
  74. Y. Yoshida, K. Shirai, Y. Nakayama et al., “Improved filler-matrix coupling in resin composites,” Journal of Dental Research, vol. 81, no. 4, pp. 270–273, 2002. View at Publisher · View at Google Scholar · View at Scopus
  75. P. Ntala, X. Chen, J. Niggli, and M. Cattell, “Development and testing of multi-phase glazes for adhesive bonding to zirconia substrates,” Journal of Dentistry, vol. 38, no. 10, pp. 773–781, 2010. View at Publisher · View at Google Scholar · View at Scopus
  76. I. Kemal, A. Whittle, R. Burford, T. Vodenitcharova, and M. Hoffman, “Toughening of unmodified polyvinylchloride through the addition of nanoparticulate calcium carbonate and titanate coupling agent,” Journal of Applied Polymer Science, vol. 127, no. 3, pp. 2339–2353, 2013. View at Publisher · View at Google Scholar · View at Scopus
  77. S. Bose and P. A. Mahanwar, “Effect of titanate coupling agent on the mechanical, thermal, dielectric, rheological, and morphological properties of filled nylon 6,” Journal of Applied Polymer Science, vol. 99, no. 1, pp. 266–272, 2006. View at Publisher · View at Google Scholar · View at Scopus
  78. M. Hajian, G. A. Koohmareh, and A. Mostaghasi, “Investigation of the effects of titanate as coupling agent and some inorganic nanoparticles as fillers on mechanical properties and morphology of soft PVC,” International Journal of Polymer Science, vol. 2011, Article ID 238619, 9 pages, 2011. View at Publisher · View at Google Scholar
  79. G. Li, S. Fan, K. Wang, X. Ren, and X. Mu, “Modification of TiO2 with titanate coupling agent and its impact on the crystallization behaviour of polybutylene terephthalate,” Iranian Polymer Journal, vol. 19, no. 2, pp. 115–121, 2010. View at Google Scholar · View at Scopus
  80. N. Menon, F. D. Blum, and L. R. Dharani, “Use of titanate coupling agents in Kevlar-phenolic composites,” Journal of Applied Polymer Science, vol. 54, no. 1, pp. 113–123, 1994. View at Publisher · View at Google Scholar · View at Scopus
  81. S. H. Han, H. J. Oh, H. C. Lee, and S. S. Kim, “The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites,” Composites Part B: Engineering, vol. 45, no. 1, pp. 172–177, 2013. View at Publisher · View at Google Scholar · View at Scopus
  82. M. Hussain, A. Nakahira, S. Nishijima, and K. Niihara, “Effects of coupling agents on the mechanical properties improvement of the TiO2 reinforced epoxy system,” Materials Letters, vol. 26, no. 6, pp. 299–303, 1996. View at Publisher · View at Google Scholar · View at Scopus
  83. Y. W. Leong, M. B. A. Bakar, Z. A. M. Ishak, and A. Ariffin, “Effects of filler treatments on the mechanical, flow, thermal, and morphological properties of talc and calcium carbonate filled polypropylene hybrid composites,” Journal of Applied Polymer Science, vol. 98, no. 1, pp. 413–426, 2005. View at Publisher · View at Google Scholar · View at Scopus
  84. S. Bose, H. Raghu, and P. A. Mahanwar, “Mica reinforced nylon-6: effect of coupling agents on mechanical, thermal, and dielectric properties,” Journal of Applied Polymer Science, vol. 100, no. 5, pp. 4074–4081, 2006. View at Publisher · View at Google Scholar · View at Scopus
  85. K. D. Jandt, A. M. O. Al-Jasser, K. Al-Ateeq, R. W. Vowles, and G. C. Allen, “Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites,” Dental Materials, vol. 18, no. 6, pp. 429–435, 2002. View at Publisher · View at Google Scholar · View at Scopus
  86. M. A. Abdelaziz, Synthesis of nanocomposites with nano-TiO2 particles and their applications as dental materials [M. Tech. Thesis], Cape Peninsula University of Technology, Cape Town, South Africa, 2012.
  87. J. Sun, A. M. Forster, P. M. Johnson et al., “Improving performance of dental resins by adding titanium dioxide nanoparticles,” Dental Materials, vol. 27, no. 10, pp. 972–982, 2011. View at Publisher · View at Google Scholar · View at Scopus
  88. A. Sodagar, A. Bahador, S. Khalil, A. Saffar Shahroudi, and M. Zaman Kassaee, “The effect of TiO2 and SiO2 nanoparticles on flexural strength of poly (methyl methacrylate) acrylic resins,” Journal of Prosthodontic Research, vol. 57, no. 1, pp. 15–19, 2013. View at Publisher · View at Google Scholar · View at Scopus
  89. K. Goto, M. Hashimoto, H. Takadama et al., “Mechanical, setting, and biological properties of bone cements containing micron-sized titania particles,” Journal of Materials Science: Materials in Medicine, vol. 19, no. 3, pp. 1009–1016, 2008. View at Publisher · View at Google Scholar · View at Scopus
  90. B. Yu, J. S. Ahn, J. I. Lim, and Y. K. Lee, “Influence of TiO2 nanoparticles on the optical properties of resin composites,” Dental Materials, vol. 25, no. 9, pp. 1142–1147, 2009. View at Publisher · View at Google Scholar · View at Scopus
  91. S. Thorat, N. Patra, R. Ruffilli, A. Diaspro, and M. Salerno, “Preparation and characterization of a BisGMA-resin dental restorative composites with glass, silica and titania fillers,” Dental Materials Journal, vol. 31, no. 4, pp. 635–644, 2012. View at Publisher · View at Google Scholar · View at Scopus
  92. Y. Hua, L. Gu, and H. Watanabe, “Micromechanical analysis of nanoparticle-reinforced dental composites,” International Journal of Engineering Science, vol. 69, pp. 69–76, 2013. View at Publisher · View at Google Scholar · View at Scopus
  93. M. Dafar, Reinforcement of flowable dental composites with titanium dioxide nanotubes [M.S. thesis], The University of Western, Ontario, Canada, 2014.
  94. K. Yoshida, M. Tanagawa, and M. Atsuta, “Effects of filler composition and surface treatment on the characteristics of opaque resin composites,” Journal of Biomedical Materials Research, vol. 58, no. 5, pp. 525–530, 2001. View at Publisher · View at Google Scholar · View at Scopus
  95. N. W. Elshereksi, S. H. Mohamed, A. Arifin, and A. Z. Mohd Ishak, “Effect of incorporation on the fracture toughness properties of denture base poly(methyl methacrylate),” Journal of Physical Science, vol. 20, no. 2, pp. 1–12, 2009. View at Google Scholar
  96. S. Deb, M. Braden, and W. Bonfield, “Water absorption characteristics of modified hydroxyapatite bone cements,” Biomaterials, vol. 16, no. 14, pp. 1095–1100, 1995. View at Publisher · View at Google Scholar · View at Scopus
  97. H. S. Kartz and J. V. Mileski, Handbook of Fillers for Plastics, Van Nostrand Reinhold, London, UK, 1987.
  98. K. Yoshida, Y. Tsuo, and M. Atsuta, “Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler,” Journal of Biomedical Materials Research B, vol. 77, no. 1, pp. 28–33, 2006. View at Publisher · View at Google Scholar · View at Scopus
  99. K. Yoshida, M. Yamashita, and M. Atsuta, “Zirconate coupling agent for bonding resin luting cement to pure zirconium,” The American Journal of Dentistry, vol. 17, no. 4, pp. 249–252, 2004. View at Google Scholar · View at Scopus
  100. R. Roperto, M. Ghazy, O. El-Mowafy, and I. J. Pesun, “Effect of surface conditioning and resin cements on the adhesion of fiber posts,” Journal of Dentistry & Oral Health, vol. 1, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  101. A. Jokstad, U. Braegger, J. B. Brunski, A. B. Carr, I. Naert, and A. Wennerberg, “Quality of dental implants,” International Journal of Prosthodontics, vol. 17, pp. 607–641.
  102. N. Adya, M. Alam, T. Ravindranath, A. Mubeen, and B. Saluja, “Corrosion in titanium dental implants: literature review,” Journal of Indian Prosthodontist Society, vol. 5, no. 3, pp. 126–131, 2005. View at Publisher · View at Google Scholar · View at Scopus
  103. G. A. A. Castilho, M. D. Martins, and W. A. A. Macedo, “Surface characterization of titanium based dental implants,” Brazilian Journal of Physics, vol. 36, no. 3, pp. 1004–1008, 2006. View at Publisher · View at Google Scholar · View at Scopus
  104. Q. Cheng, C. Li, V. Pavlinek, P. Saha, and H. Wang, “Surface-modified antibacterial TiO2/Ag+ nanoparticles: preparation and properties,” Applied Surface Science, vol. 252, no. 12, pp. 4154–4160, 2006. View at Publisher · View at Google Scholar · View at Scopus
  105. C. X. Cui, X. Gao, Y. M. Qi, S. J. Liu, and J. B. Sun, “Microstructure and antibacterial property of in situTiO2 nanotube layers/titanium biocomposites,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 8, pp. 178–183, 2012. View at Publisher · View at Google Scholar · View at Scopus
  106. X. Miao, M. Zhu, Y. Li, Q. Zhang, and H. Wang, “Synthesis of dental resins using diatomite and nano-sized SiO2 and TiO2,” Progress in Natural Science: Materials International, vol. 22, no. 2, pp. 94–99, 2012. View at Publisher · View at Google Scholar · View at Scopus
  107. K. Yoshida, H. Matsumura, T. Tanaka, and M. Atsuta, “Properties of titanium dioxide-polymer composite with titanate coupling agents,” Shika Zairyo, kikai, vol. 8, no. 5, pp. 629–635, 1989. View at Google Scholar · View at Scopus
  108. M. Mozafari, E. Salahinejad, V. Shabafrooz, M. Yazdimamaghani, D. Vashaee, and L. Tayebi, “Multilayer bioactive glass/zirconium titanate thin films in bone tissue engineering and regenerative dentistry,” International Journal of Nanomedicine, vol. 8, pp. 1665–1672, 2013. View at Publisher · View at Google Scholar · View at Scopus
  109. J. Yu and J. Chu, “Nanocrystalline barium titanate,” Encyclopedia of Nanoscience and Nanotechnology, vol. 6, pp. 389–416, 2004. View at Google Scholar
  110. G. Ciofani, L. Ricotti, C. Canale et al., “Effects of barium titanate nanoparticles on proliferation and differentiation of rat mesenchymal stem cells,” Colloids and Surfaces B: Biointerfaces, vol. 102, pp. 312–320, 2013. View at Publisher · View at Google Scholar · View at Scopus
  111. F. R. Baxter, I. G. Turner, C. R. Bowen, J. P. Gittings, and J. B. Chaudhuri, “An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells,” Journal of Materials Science: Materials in Medicine, vol. 20, no. 8, pp. 1697–1708, 2009. View at Publisher · View at Google Scholar · View at Scopus
  112. F. R. Baxter, C. R. Bowen, I. G. Turner, and A. C. E. Dent, “Electrically active bioceramics: a review of interfacial responses,” Annals of Biomedical Engineering, vol. 38, no. 6, pp. 2079–2092, 2010. View at Publisher · View at Google Scholar · View at Scopus
  113. Q. Wang, J. Liu, J. Zhu, Y. Ye, X. Li, and Z. Chen, “Piezoelectric and bonding properties of a cement-based composite for dental application,” Applied Surface Science, vol. 255, no. 2, pp. 574–576, 2008. View at Publisher · View at Google Scholar · View at Scopus
  114. R. B. Fonseca, C. A. Branco, P. V. Soares et al., “Radiodensity of base, liner and luting dental materials,” Clinical Oral Investigations, vol. 10, no. 2, pp. 114–118, 2006. View at Publisher · View at Google Scholar · View at Scopus
  115. International Organization for Standardization (ISO), “Dentistry—polymer-based filling, restorative and luting materials,” ISO 4049:2000, Geneva, Switzerland, 2000. View at Google Scholar
  116. T. Tsuge, “Radiopacity of conventional, resin-modified glass ionomer, and resin-based luting materials,” Journal of Oral Science, vol. 51, no. 2, pp. 223–230, 2009. View at Publisher · View at Google Scholar · View at Scopus
  117. D. R. Cruvinel, L. D. F. R. Garcia, L. A. Casemiro, L. C. Pardini, and F. D. C. P. Pires-de-Souza, “Evaluation of radiopacity and microhardness of composites submitted to artificial aging,” Materials Research, vol. 10, no. 3, pp. 325–329, 2007. View at Publisher · View at Google Scholar · View at Scopus