Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 921017, 9 pages
http://dx.doi.org/10.1155/2014/921017
Research Article

Nanocrystalline 6061 Al Powder Fabricated by Cryogenic Milling and Consolidated via High Frequency Induction Heat Sintering

1Materials Science, Department of Chemical Engineering and Materials Science, University of California Irvine, Irvine, CA 92697, USA
2Mechanical Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia
3Center of Excellence for Research in Engineering Materials (CEREM), College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia

Received 19 January 2014; Revised 20 April 2014; Accepted 22 April 2014; Published 12 May 2014

Academic Editor: Pavel Lejcek

Copyright © 2014 Walid Hanna et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Walid Hanna, Khinlay Maung, Ehab A. El-Danaf, Abdulhakim A. Almajid, Mahmoud S. Soliman, and Farghalli A. Mohamed, “Nanocrystalline 6061 Al Powder Fabricated by Cryogenic Milling and Consolidated via High Frequency Induction Heat Sintering,” Advances in Materials Science and Engineering, vol. 2014, Article ID 921017, 9 pages, 2014. doi:10.1155/2014/921017