Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 984341, 8 pages
http://dx.doi.org/10.1155/2014/984341
Research Article

A New Pull-Out Technique for In-Place Estimation of Concrete Compressive Strength

1BOVIAR SRL, via Rho 56, 20020 Lainate, Italy
2Department of Civil, Chemical and Environmental Engineering, University of Genoa, Via Montallegro 1, 16145 Genova, Italy

Received 27 May 2013; Revised 6 December 2013; Accepted 19 December 2013; Published 6 February 2014

Academic Editor: Jiangbo Sha

Copyright © 2014 F. Latte Bovio et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

F. Latte Bovio, G. Latte Bovio, A. Brencich, G. Cassini, D. Pera, and G. Riotto, “A New Pull-Out Technique for In-Place Estimation of Concrete Compressive Strength,” Advances in Materials Science and Engineering, vol. 2014, Article ID 984341, 8 pages, 2014. https://doi.org/10.1155/2014/984341.