Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 120759, 11 pages
http://dx.doi.org/10.1155/2015/120759
Research Article

Flexural Capacity Calculation Approach for Precast Grouted Shear Wall Influenced by Joint Interface Displacements

1College of Civil Engineering, Southeast University, Nanjing 210096, China
2Architects and Engineering Co., Ltd., Southeast University, Nanjing 210096, China

Received 30 April 2015; Revised 18 August 2015; Accepted 19 August 2015

Academic Editor: Antônio G. B. de Lima

Copyright © 2015 Dong-yue Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Kramar, T. Isaković, and M. Fischinger, “Seismic collapse risk of precast industrial buildings with strong connections,” Earthquake Engineering and Structural Dynamics, vol. 39, no. 8, pp. 847–868, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. B. J. Smith, Y. C. Kurama, and M. J. McGinnis, “Behavior of precast concrete shear walls for seismic regions: comparison of hybrid and emulative specimens,” Journal of Structural Engineering, vol. 139, no. 11, pp. 1917–1927, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. S. El-Tawil, K. A. Harries, P. J. Fortney, B. M. Shahrooz, and Y. Kurama, “Seismic design of hybrid coupled wall systems: state of the art,” Journal of Structural Engineering, vol. 136, no. 7, pp. 755–769, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. N. M. Hawkins and S. K. Ghosh, “Requirements for the use of PRESSS moment-resisting frame systems,” PCI Journal, vol. 49, no. 2, pp. 98–103, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. A. A. Yee, “Social and environmental benefits of precast concrete technology,” PCI Journal, vol. 46, no. 3, pp. 14–19, 2001. View at Google Scholar · View at Scopus
  6. A. A. Sayadi, A. B. A. Rahman, M. Z. B. Jumaat, U. Johnson Alengaram, and S. Ahmad, “The relationship between interlocking mechanism and bond strength in elastic and inelastic segment of splice sleeve,” Construction and Building Materials, vol. 55, pp. 227–237, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Jiabin, G. Zhengxing, and C. Leqi, “Research on precast roof truss of prestressed concrete square pile,” in Proceedings of the International Conference on Advanced Engineering Materials and Architecture Science, Applied Mechanics and Materials, pp. 359–364, Xi'an, China, 2014.
  8. S.-M. Kang, O.-J. Kim, and H.-G. Park, “Cyclic loading test for emulative precast concrete walls with partially reduced rebar section,” Engineering Structures, vol. 56, pp. 1645–1657, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Soltani, X. An, and K. Maekawa, “Localized nonlinearity and size-dependent mechanics of in-plane RC element in shear,” Engineering Structures, vol. 27, no. 6, pp. 891–908, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. J. H. Ling, A. B. Abd. Rahman, I. S. Ibrahim, and Z. Abdul Hamid, “Behaviour of grouted pipe splice under incremental tensile load,” Construction and Building Materials, vol. 33, no. 8, pp. 90–98, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. GB 50011-2010, Code for Seismic Design of Buildings, China Architecture & Building Press, Beijing, China, 2010.
  12. ACI Committee 318, Building Code Requirements for Structural Concrete (ACT 318-11), American Concrete Institute, Farmington Hills, Mich, USA, 2011.
  13. Z.-C. Deng and J.-L. Qu, “The experimental studies on behavior of ultrahigh-performance concrete confined by hybrid fiber-reinforced polymer tubes,” Advances in Materials Science and Engineering, vol. 2015, Article ID 201289, 18 pages, 2015. View at Publisher · View at Google Scholar
  14. A. K. Samani and M. M. Attard, “A stress-strain model for uniaxial and confined concrete under compression,” Engineering Structures, vol. 41, pp. 335–349, 2012. View at Publisher · View at Google Scholar · View at Scopus