Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 162782, 12 pages
http://dx.doi.org/10.1155/2015/162782
Research Article

Parallel Piezoelectric Shunt Damping of Rotationally Periodic Structures

1Active Structures Laboratory, Université Libre de Bruxelles, 50 Avenue Franklin Roosevelt, 1050 Brussels, Belgium
2Technical University “Gheorghe Asachi”, 67 Boulevard Professor Dimitrie Mangeron, 700050 Iasi, Romania
3Babes Bolyai University, 1 Mihail Kogalniceanu Street, 400084 Cluj-Napoca, Romania
4Groupe SAFRAN, Techspace Aero, 121 Route de Liers, 4041 Liège, Belgium

Received 15 December 2014; Revised 24 March 2015; Accepted 24 March 2015

Academic Editor: João P. Davim

Copyright © 2015 Bilal Mokrani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [17 citations]

The following is the list of published articles that have cited the current article.

  • Xin Liu, Lin Li, Yu Fan, and PengCheng Deng, “Improving the Aero-Elastic Stability of Bladed Disks through Parallel Piezoelectric Network,” 2018 Joint Propulsion Conference, . View at Publisher · View at Google Scholar
  • Olivier De Smet, Jean-François Deü, and Olivier Thierry, “Vibration reduction of a woven composite fan blade by piezoelectric shunted devices,” Journal of Physics: Conference Series, vol. 744, no. 1, 2016. View at Publisher · View at Google Scholar
  • Lin Li, Pengcheng Deng, Jiuzhou Liu, and Chao Li, “Theoretical Study of the Vibration Suppression on a Mistuned Bladed Disk Using a Bi-periodic Piezoelectric Network,” International Journal of Turbo & Jet-Engines, no. 0, 2016. View at Publisher · View at Google Scholar
  • Olivier Thierry, Jean-François Deü, Boris Lossouarn, and Mathieu Aucejo, “Comparison of passive inductor designs for piezoelectric shunt damping,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 9799, 2016. View at Publisher · View at Google Scholar
  • Lin Li, Pengcheng Deng, Jiuzhou Liu, and Chao Li, “A comparative study on the dynamic characteristics of bladed disks with piezoelectric network and piezoelectric shunt circuit,” Proceedings of the ASME Turbo Expo, vol. 7, 2016. View at Publisher · View at Google Scholar
  • B Mokrani, and A Preumont, “A numerical and experimental investigation on passive piezoelectric shunt damping of mistuned blisks,” Journal of Intelligent Material Systems and Structures, pp. 1045389X1772102, 2017. View at Publisher · View at Google Scholar
  • B. Lossouarn, M. Aucejo, J.-F. Deü, and B. Multon, “Design of inductors with high inductance values for resonant piezoelectric damping,” Sensors and Actuators A: Physical, vol. 259, pp. 68–76, 2017. View at Publisher · View at Google Scholar
  • Peng-Cheng Deng, Lin Li, and Chao Li, “Study on vibration of mistuned bladed disk with bi-periodic piezoelectric network,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 231, no. 2, pp. 350–363, 2017. View at Publisher · View at Google Scholar
  • Jiuzhou Liu, Lin Li, Yu Fan, and Pengcheng Deng, “Research on vibration suppression of a mistuned blisk by a piezoelectric network,” Chinese Journal of Aeronautics, 2017. View at Publisher · View at Google Scholar
  • J. Liu, L. Li, X. Huang, and L. Jezequel, “Dynamic characteristics of the blisk with synchronized switch damping based on negative capacitor,” Mechanical Systems and Signal Processing, vol. 95, pp. 425–445, 2017. View at Publisher · View at Google Scholar
  • Iman Shojaei, Ali Kaveh, Hossein Rahami, Reza Shirazi, and Babak Bazrgari, “Analysis and reanalysis of mechanical systems: concept of global near-regularity,” Acta Mechanica, vol. 228, no. 4, pp. 1445–1456, 2017. View at Publisher · View at Google Scholar
  • Bilal Mokrani, Renaud Bastaits, Iulian Romanescu, Mihaita Horodinca, Ioan Burda, and André Preumont, “Passive Damping of Rotationally Periodic Structures with Tuned Piezoelectric Inductive Shunt,” Actuators, vol. 7, no. 3, pp. 41, 2018. View at Publisher · View at Google Scholar
  • Jiuzhou Liu, Lin Li, and Yu Fan, “A comparison between the friction and piezoelectric synchronized switch dampers for blisks,” Journal of Intelligent Material Systems and Structures, vol. 29, no. 12, pp. 2693–2705, 2018. View at Publisher · View at Google Scholar
  • Jiuzhou Liu, Lin Li, Yu Fan, and Xingrong Huang, “A Modified Nonlinear Modal Synthesis Scheme for Mistuned Blisks with Synchronized Switch Damping,” International Journal of Aerospace Engineering, vol. 2018, pp. 1–15, 2018. View at Publisher · View at Google Scholar
  • Garrett K. Lopp, and Jeffrey L. Kauffman, “Vibration Reduction of Mistuned Bladed Disks Via Piezoelectric-Based Resonance Frequency Detuning,” Journal of Vibration and Acoustics, vol. 140, no. 5, pp. 051007, 2018. View at Publisher · View at Google Scholar
  • J.A.B. Gripp, and D.A. Rade, “Vibration and noise control using shunted piezoelectric transducers: A review,” Mechanical Systems and Signal Processing, vol. 112, pp. 359–383, 2018. View at Publisher · View at Google Scholar
  • Garrett K. Lopp, and Jeffrey L. Kauffman, “An experimental study of resonance frequency detuning applied to blade mistuning,” Proceedings of the ASME Turbo Expo, vol. 7C, 2018. View at Publisher · View at Google Scholar