Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 170295, 18 pages
http://dx.doi.org/10.1155/2015/170295
Research Article

Performance Analysis of CFRP Composite Strips Confined RC Columns under Axial Compression

1Department of Civil Engineering, KPR Institute of Engineering and Technology, Coimbatore, Tamil Nadu 641 407, India
2R&D Center, JNTINC Co. Ltd., Hwaseong 445-842, Republic of Korea
3Department of Civil Engineering, Chungnam National University, Daejeon 305764, Republic of Korea

Received 15 October 2014; Revised 27 April 2015; Accepted 27 April 2015

Academic Editor: Filippo Giannazzo

Copyright © 2015 J. Raja Murugadoss et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Lam and J. G. Teng, “Strength models for fiber-reinforced plastic-confined concrete,” Journal of Structural Engineering, vol. 128, no. 5, pp. 612–623, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. Y.-F. Wu, T. Liu, and D. J. Oehlers, “Fundamental principles that govern retrofitting of reinforced concrete columns by steel and FRP jacketing,” Advances in Structural Engineering, vol. 9, no. 4, pp. 507–532, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Fukuyama and S. Sugano, “Japanese seismic rehabilitation of concrete buildings after the Hyogoken-Nanbu Earthquake,” Cement and Concrete Composites, vol. 22, no. 1, pp. 59–79, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. R. K. L. Su and L. Wang, “Axial strengthening of preloaded rectangular concrete columns by precambered steel plates,” Engineering Structures, vol. 38, pp. 42–52, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Soudki and T. Alkhrdaji, “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures,” ACI 440.2 R-02, 2005. View at Google Scholar
  6. S. Pessiki, K. A. Harries, J. T. Kestner, R. Sause, and J. M. Ricles, “Axial behavior of reinforced concrete columns confined with FRP jackets,” Journal of Composites for Construction, vol. 5, no. 4, pp. 237–245, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Xiao and H. Wu, “Compressive behavior of concrete confined by carbon fiber composite jackets,” Journal of Materials in Civil Engineering, vol. 12, no. 2, pp. 139–146, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Maruyama, H. Nakai, F. Katsuki, and T. Shimomura, “Improvement of shear and ductility of reinforced concrete columns by wrapping of continuous fiber-reinforced polymer sheet,” Advanced Composite Materials, vol. 10, no. 2-3, pp. 119–126, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Toutanji and Y. Deng, “Performance of concrete columns strengthened with fiber reinforced polymer composite sheets,” Advanced Composite Materials, vol. 10, no. 2-3, pp. 159–168, 2001. View at Publisher · View at Google Scholar · View at Scopus
  10. O. Chaallal, M. Shahawy, and M. Hassan, “Performance of axially loaded short rectangular columns strengthened with carbon fiber-reinforced polymer wrapping,” Journal of Composites for Construction, vol. 7, no. 3, pp. 200–208, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Mukherjee, T. E. Boothby, C. E. Bakis, M. V. Joshi, and S. R. Maitra, “Mechanical behavior of fiber-reinforced polymer-wrapped concrete columns—complicating effects,” Journal of Composites for Construction, vol. 8, no. 2, pp. 97–103, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. M. K. Zaki, “Investigation of FRP strengthened circular columns under biaxial bending,” Engineering Structures, vol. 33, no. 5, pp. 1666–1679, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Yaqub and C. G. Bailey, “Repair of fire damaged circular reinforced concrete columns with FRP composites,” Construction and Building Materials, vol. 25, no. 1, pp. 359–370, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. G. Wu, Z. T. Lü, and Z. S. Wu, “Strength and ductility of concrete cylinders confined with FRP composites,” Construction and Building Materials, vol. 20, no. 3, pp. 134–148, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. T. W. Park, U. J. Na, L. Chung, and M. Q. Feng, “Compressive behavior of concrete cylinders confined by narrow strips of CFRP with spacing,” Composites Part B: Engineering, vol. 39, no. 7-8, pp. 1093–1103, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Bouchelaghem, A. Bezazi, and F. Scarpa, “Compressive behaviour of concrete cylindrical FRP-confined columns subjected to a new sequential loading technique,” Composites Part B: Engineering, vol. 42, no. 7, pp. 1987–1993, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. J. L. Pan, T. Xu, and Z. J. Hu, “Experimental investigation of load carrying capacity of the slender reinforced concrete columns wrapped with FRP,” Construction and Building Materials, vol. 21, no. 11, pp. 1991–1996, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. Z. S. Wu, K. Iwashita, K. Hayashi, T. Higuchi, S. Murakami, and Y. Koseki, “Strengthening prestressed-concrete girders with externally prestressed PBO fiber reinforced polymer sheets,” Journal of Reinforced Plastics & Composites, vol. 22, no. 14, pp. 1269–1286, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. S. E. Mouring, O. Barton Jr., and D. K. Simmons, “Reinforced concrete beams externally retrofitted with advanced composites,” Advanced Composite Materials, vol. 10, no. 2-3, pp. 139–146, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Attari, S. Amziane, and M. Chemrouk, “Efficiency of beam–column joint strengthened by FRP laminates,” Advanced Composite Materials, vol. 19, no. 2, pp. 171–183, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Y. Sun, G. Wu, Z. S. Wu, and Y. B. Luo, “Flexural strengthening of concrete beams with near-surface mounted steel–fiber-reinforced polymer composite bars,” Journal of Reinforced Plastics and Composites, vol. 30, no. 18, pp. 1529–1537, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. T. Sen and H. N. J. Reddy, “Pretreatment of woven jute FRP composite and its use in strengthening of reinforced concrete beams in flexure,” Advances in Materials Science and Engineering, vol. 2013, Article ID 128158, 15 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. B. Hu, J.-G. Wang, and G.-Q. Li, “Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading,” Construction and Building Materials, vol. 25, no. 5, pp. 2751–2763, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. B. Csuka and L. P. Kollár, “Analysis of FRP confined columns under eccentric loading,” Composite Structures, vol. 94, no. 3, pp. 1106–1116, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. G. P. Lignola, F. Nardone, A. Prota, and G. Manfredi, “Analytical model for the effective strain in FRP-wrapped circular RC columns,” Composites Part B: Engineering, vol. 43, no. 8, pp. 3208–3218, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. T. Jiang and J. G. Teng, “Theoretical model for slender FRP-confined circular RC columns,” Construction and Building Materials, vol. 32, pp. 66–76, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Abdollahi, M. Bakhshi, M. Motavalli, and M. Shekarchi, “Experimental modeling of GFRP confined concrete cylinders subjected to axial loads,” in Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Patras, Greece, 2007.
  28. C. Au and O. Buyukozturk, “Effect of fiber orientation and ply mix on fiber reinforced polymer-confined concrete,” Journal of Composites for Construction, vol. 9, no. 5, pp. 397–407, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. T. H. Pon, Y. F. Li, B. J. Shih, M. S. Han, G. D. Chu, and Y. J. Chiu, “Experiments of scale effects on the strength of FRP reinforced concrete,” in Proceedings of the 4th National Conference on Structural Engineering, Taipei, Taiwan, 1998.
  30. L. Bisby, W. A. Take, and A. Caspary, “Quantifying strain variation FRP confined using digital image correlation: proof-of-concept and initial results,” in Proceedings of the Asia-Pacific Conference on FRP in Structures, 2007.
  31. C. Aire, R. Gettu, J. R. Casas, S. Marques, and D. Marques, “Concrete laterally confined with fibre-reinforced polymers (FRP): experimental study and theoretical model,” Materiales de Construccion, vol. 60, no. 297, pp. 19–31, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. M. A. G. Silva, “Behavior of square and circular columns strengthened with aramidic or carbon fibers,” Construction and Building Materials, vol. 25, no. 8, pp. 3222–3228, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. T. H. Almusallam, “Behavior of normal and high-strength concrete cylinders confined with E-glass/epoxy composite laminates,” Composites Part B: Engineering, vol. 38, no. 5-6, pp. 629–639, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. M. A. G. Silva and C. C. Rodriguez, “Size and relative stiffness effects on compressive failure of concrete columns wrapped with glass FRP,” Journal of Materials in Civil Engineering, vol. 18, no. 3, pp. 334–342, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. R. Benzaid, H. Mesbah, and N. Chikh, “FRP-confined concrete cylinders: axial compression experiments and strength model,” Journal of Reinforced Plastics and Composites, vol. 29, no. 16, pp. 2469–2488, 2010. View at Publisher · View at Google Scholar · View at Scopus
  36. S. T. Smith, S. J. Kim, and H. Zhang, “Behavior and effectiveness of FRP wrap in the confinement of large concrete cylinders,” Journal of Composites for Construction, vol. 14, no. 5, pp. 573–582, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. B. Erdil, U. Akyuz, and I. O. Yaman, “Mechanical behavior of CFRP confined low strength concretes subjected to simultaneous heating-cooling cycles and sustained loading,” Materials and Structures, vol. 45, no. 1-2, pp. 223–233, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. R. Akogbe, M. Liang, and Z. Wu, “Size effect of axial compressive strength of CFRP confined concrete cylinders,” International Journal of Concrete Structures and Materials, vol. 5, no. 1, pp. 49–55, 2011. View at Publisher · View at Google Scholar
  39. K. Miyauchi, S. Nishibayashi, and S. Inoue, “Estimation of strengthening effects with carbon fiber sheet for concrete column,” in Proceedings of the 3rd International Symposium on Non-Metallic Reinforcement for Concrete Structures, Sapporo, Japan, 1997.
  40. L.-M. Wang and Y.-F. Wu, “Effect of corner radius on the performance of CFRP-confined square concrete columns: test,” Engineering Structures, vol. 30, no. 2, pp. 493–505, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. K. Hosotani, K. Kawashima, and J. Hoshikuma, “A model for confinement effect for concrete cylinders confined by carbon fiber sheets,” in Proceedings of the NCEER-INCEDE Workshop on Earthquake Engineering Frontiers of Transportation Facilities, State University of New York, Buffalo, NY, USA, 1997.
  42. I. A. E. M. Shehata, L. A. V. Carneiro, and L. C. D. Shehata, “Strength of confined short concrete columns,” in Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Patras, Greece, 2007.
  43. D. Santarosa, A. C. Filho, A. J. Beber, and J. L. Campagnolo, “Concrete columns confined with CFRP sheets,” in Proceedings of the International Conference of FRP Composites in Civil Engineering, Hong Kong, China, 2001.
  44. M. Thériault, K. W. Neale, and S. Claude, “Fiber-reinforced polymer-confined circular concrete columns: investigation of size and slenderness effects,” Journal of Composites for Construction, vol. 8, no. 4, pp. 323–331, 2004. View at Publisher · View at Google Scholar · View at Scopus
  45. V. Valdmanis, L. De Lorenzis, T. Rousakis, and R. Tepfers, “Behaviour and capacity of CFRP-confined concrete cylinders subjected to monotonic and cyclic axial compressive load,” Structural Concrete, vol. 8, no. 4, pp. 187–200, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. Y.-F. Wang and H.-L. Wu, “Size effect of concrete short columns confined with aramid FRP jackets,” Journal of Composites for Construction, vol. 15, no. 4, pp. 535–544, 2011. View at Publisher · View at Google Scholar · View at Scopus
  47. Y.-C. Wang and K. Hsu, “Design of FRP-wrapped reinforced concrete columns for enhancing axial load carrying capacity,” Composite Structures, vol. 82, no. 1, pp. 132–139, 2008. View at Publisher · View at Google Scholar · View at Scopus
  48. M. N. S. Hadi, “Behaviour of FRP strengthened concrete columns under eccentric compression loading,” Composite Structures, vol. 77, no. 1, pp. 92–96, 2007. View at Publisher · View at Google Scholar · View at Scopus
  49. W. Punurai, C.-T. T. Hsu, S. Punurai, and J. Chen, “Biaxially loaded RC slender columns strengthened by CFRP composite fabrics,” Engineering Structures, vol. 46, pp. 311–321, 2013. View at Publisher · View at Google Scholar · View at Scopus
  50. M. Quiertant and J.-L. Clement, “Behavior of RC columns strengthened with different CFRP systems under eccentric loading,” Construction and Building Materials, vol. 25, no. 2, pp. 452–460, 2011. View at Publisher · View at Google Scholar · View at Scopus
  51. T. M. Pham, L. V. Doan, and M. N. S. Hadi, “Strengthening square reinforced concrete columns by circularisation and FRP confinement,” Construction and Building Materials, vol. 49, pp. 490–499, 2013. View at Publisher · View at Google Scholar · View at Scopus
  52. G. Li, S. Kidane, S.-S. Pang, J. E. Helms, and M. A. Stubblefield, “Investigation into FRP repaired RC columns,” Composite Structures, vol. 62, no. 1, pp. 83–89, 2003. View at Publisher · View at Google Scholar · View at Scopus
  53. N. A. Siddiqui, S. H. Alsayed, Y. A. Al-Salloum, R. A. Iqbal, and H. Abbas, “Experimental investigation of slender circular RC columns strengthened with FRP composites,” Construction and Building Materials, vol. 69, pp. 323–334, 2014. View at Publisher · View at Google Scholar
  54. S. S. Sharma, U. V. Dave, and H. Solanki, “FRP wrapping for RC columns with varying corner radii,” Procedia Engineering, vol. 51, pp. 220–229, 2013. View at Publisher · View at Google Scholar
  55. A. M. Vasumathi, K. Rajkumar, and G. Ganesh Prabhu, “Compressive behaviour of RC column with fibre reinforced concrete confined by CFRP strips,” Advances in Materials Science and Engineering, vol. 2014, Article ID 601915, 10 pages, 2014. View at Publisher · View at Google Scholar
  56. IS 8112, Ordinary Portland Cement, 43 Grade—Specification, Bureau of Indian Standards, New Delhi, India, 2013.
  57. Bureau of Indian Standards, IS 2386 (Part 1). Methods of Test for Aggregates for Concrete: Part 1 Particle Size and Shape, Bureau of Indian Standards, New Delhi, India, 1963.
  58. R. Benzaid and H. Mesbah, “FRP-confined concrete cylinders: axial compression experiments and strength model,” Journal of Reinforced Plastics and Composites, vol. 29, no. 16, pp. 2469–2488, 2010. View at Publisher · View at Google Scholar · View at Scopus
  59. I. A. E. M. Shehata, L. A. V. Carneiro, and L. C. D. Shehata, “Strength of short concrete columns confined with CFRP sheets,” Materials and Structures, vol. 35, no. 1, pp. 50–58, 2002. View at Google Scholar · View at Scopus
  60. V. M. Karbhari and Y. Gao, “Composite jacketed concrete under uniaxial compression—verification of simple design equations,” Journal of Materials in Civil Engineering, vol. 9, no. 4, pp. 185–193, 1997. View at Publisher · View at Google Scholar · View at Scopus
  61. H. A. Toutanji, “Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets,” ACI Materials Journal, vol. 96, no. 3, pp. 397–404, 1999. View at Google Scholar · View at Scopus
  62. Y.-Y. Wei and Y.-F. Wu, “Unified stress-strain model of concrete for FRP-confined columns,” Construction and Building Materials, vol. 26, no. 1, pp. 381–392, 2012. View at Publisher · View at Google Scholar · View at Scopus
  63. Bureau of Indian Standards, “Guidelines for concrete mix proportioning,” IS 10262:2009, Bureau of Indian Standards, New Delhi, India, 2009. View at Google Scholar
  64. P. A. Calderón, J. M. Adam, S. Ivorra, F. J. Pallarés, and E. Giménez, “Design strength of axially loaded RC columns strengthened by steel caging,” Materials and Design, vol. 30, no. 10, pp. 4069–4080, 2009. View at Publisher · View at Google Scholar · View at Scopus
  65. S. R. Gopal and P. D. Manoharan, “Experimental behaviour of eccentrically loaded slender circular hollow steel columns in-filled with fibre reinforced concrete,” Journal of Constructional Steel Research, vol. 62, no. 5, pp. 513–520, 2006. View at Publisher · View at Google Scholar · View at Scopus
  66. F. E. Richart, A. Brandtzaeg, and R. L. Brown, A Study of the Failure of Concrete under Combined Compressive Stresses, Engineering Experiment Station, University of Illinois, Urbana, Ill, USA, 1928.
  67. V. Tamuzs, R. Tepfers, E. Zile, and O. Ladnova, “Behavior of concrete cylinders confined by a carbon composite 3. Deformability and the ultimate axial strain,” Mechanics of Composite Materials, vol. 42, no. 4, pp. 303–314, 2006. View at Publisher · View at Google Scholar · View at Scopus
  68. M. N. Youssef, M. Q. Feng, and A. S. Mosallam, “Stress-strain model for concrete confined by FRP composites,” Composites Part B: Engineering, vol. 38, no. 5-6, pp. 614–628, 2007. View at Publisher · View at Google Scholar · View at Scopus