Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 179714, 8 pages
http://dx.doi.org/10.1155/2015/179714
Research Article

Hot Embossing of Zr-Based Bulk Metallic Glass Micropart Using Stacked Silicon Dies

1State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
2Jiangxi Province Key Laboratory of Numerical Control Technology and Application, Jiujiang 332005, China

Received 11 February 2015; Revised 29 May 2015; Accepted 14 June 2015

Academic Editor: Jörg M. K. Wiezorek

Copyright © 2015 Zhijing Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Zhijing Zhu, Chuanyun Yi, Tielin Shi, Yichun Zhang, Yang Gao, and Guanglan Liao, “Hot Embossing of Zr-Based Bulk Metallic Glass Micropart Using Stacked Silicon Dies,” Advances in Materials Science and Engineering, vol. 2015, Article ID 179714, 8 pages, 2015. doi:10.1155/2015/179714