Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 269167, 13 pages
http://dx.doi.org/10.1155/2015/269167
Research Article

Study of Direct Bonding Ceramics with Metal Using Sn2La Solder

Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Paulínska 16, 917 24 Trnava, Slovakia

Received 23 September 2015; Revised 26 October 2015; Accepted 2 November 2015

Academic Editor: Wei Zhou

Copyright © 2015 Roman Koleňák and Igor Kostolný. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. H. Liu, Y. J. Kim, D. W. Chun et al., “Universal solders for direct bonding and packaging of optical devices,” Materials Letters, vol. 152, pp. 232–236, 2015. View at Publisher · View at Google Scholar
  2. A. A. El-Daly, A. M. El-Taher, and S. Gouda, “Development of new multicomponent Sn-Ag-Cu-Bi lead-free solders for low-cost commercial electronic assembly,” Journal of Alloys and Compounds, vol. 627, pp. 268–275, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. E. H. Amalu, W. K. Lau, N. N. Ekere et al., “A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits,” Microelectronic Engineering, vol. 88, no. 7, pp. 1610–1617, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Lemus-Ruiz, A. O. Guevara-Laureano, J. Zarate-Medina, A. Arellano-Lara, and L. Ceja-Cárdenas, “Interface behavior of Al2O3/Ti joints produced by liquid state bonding,” Applied Radiation and Isotopes, vol. 98, pp. 1–6, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. W.-Y. Yu, S.-H. Liu, X.-Y. Liu, M.-P. Liu, and W.-G. Shi, “Interface reaction in ultrasonic vibration-assisted brazing of aluminum to graphite using Sn–Ag–Ti solder foil,” Journal of Materials Processing Technology, vol. 221, pp. 285–290, 2015. View at Publisher · View at Google Scholar
  6. T. Zaharinie, R. Moshwan, F. Yusof, M. Hamdi, and T. Ariga, “Vacuum brazing of sapphire with inconel 600 using Cu/Ni porous composite interlayer for gas pressure sensor application,” Materials and Design, vol. 54, pp. 375–381, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. P. Xian, “Wetting of Si-Al-O-N ceramic by Sn-5at.%Ti-X ternary active solder,” Materials Science and Engineering: B, vol. 25, pp. 39–46, 1994. View at Publisher · View at Google Scholar
  8. Y. H. Liu, J. D. Hu, P. Shen, X. H. Han, and J. C. Li, “Microstructural and mechanical properties of jointed ZrO2/Ti-6Al-4V alloy using Ti33Zr17Cu50 amorphous brazing filler,” Materials and Design, vol. 47, pp. 281–286, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. A. V. Durov, B. D. Kostjuk, A. V. Shevchenko, and Y. V. Naidich, “Joining of zirconia to metal with Cu-Ga-Ti and Cu-Sn-Pb-Ti fillers,” Materials Science and Engineering A, vol. 290, no. 1, pp. 186–189, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Wu, C.-Z. Cao, R. Ud-Din, X.-B. He, and X.-H. Qu, “Brazing diamond/Cu composite to alumina using reactive Ag-Cu-Ti alloy,” Transactions of Nonferrous Metals Society of China, vol. 23, no. 6, pp. 1701–1708, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Ji, H. Chen, and M. Li, “Microstructures and properties of alumina/copper joints fabricated by ultrasonic-assisted brazing for replacing DBC in power electronics packaging,” in Proceedings of the 15th International Conference on Electronic Packaging Technology (ICEPT '14), pp. 1291–1294, Chengdu, China, August 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Chen, J. Yan, S. Ren, Q. Wang, J. Wei, and G. Fan, “Microstructure, mechanical properties, and bonding mechanism of ultrasonic-assisted brazed joints of SiC ceramics with ZnAlMg filler metals in air,” Ceramics International, vol. 40, no. 1, pp. 683–689, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. W. Cui, J. Yan, Y. Dai, and D. Li, “Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound,” Ultrasonics Sonochemistry, vol. 22, pp. 108–112, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Koleňák, P. Šebo, M. Provazník, M. Koleňáková, and K. Ulrich, “Shear strength and wettability of active Sn3.5Ag4Ti(Ce,Ga) solder on Al2O3 ceramics,” Materials and Design, vol. 32, no. 7, pp. 3997–4003, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Y. Chang, L. C. Tsao, M. J. Chiang, C. N. Tung, G. H. Pan, and T. H. Chuang, “Active soldering of indium tin oxide (ITO) with Cu in air using an Sn3.5Ag4Ti(Ce, Ga) filler,” Journal of Materials Engineering and Performance, vol. 12, no. 4, pp. 383–389, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Y. Chang, T. H. Chuang, and C. L. Yang, “Low temperature bonding of alumina/alumina and alumina/copper in air using Sn3.5Ag4Ti(Ce,Ga) filler,” Journal of Electronic Materials, vol. 36, no. 9, pp. 1193–1198, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Y. Chang, T. H. Chuang, L. C. Tsao, C. L. Yang, and Z. S. Yang, “Active soldering of ZnS-SiO2 sputtering targets to copper backing plates using an Sn3.5Ag4Ti(Ce, Ga) filler metal,” Journal of Materials Processing Technology, vol. 202, no. 1–3, pp. 22–26, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. L. C. Tsao, “Direct active soldering of micro-arc oxidized Ti/Ti joints in air using Sn3.5Ag0.5Cu4Ti(RE) filler,” Materials Science and Engineering A, vol. 565, pp. 63–71, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. T. H. Chuang, H. J. Lin, and C. C. Chi, “Rapid growth of tin whiskers on the surface of Sn-6.6Lu alloy,” Scripta Materialia, vol. 56, no. 1, pp. 45–48, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Hao, H. He, and Y. Lu, “Study of tin whisker growth accelerated by rare earth phase and the mechanism of tin whisker growth,” in Proceedings of the15th International Conference on Electronic Packaging Technology (ICEPT '14), pp. 1120–1126, Chengdu, China, August 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. T.-H. Chuang, “Temperature effects on the whiskers in rare-earth doped Sn-3Ag-0.5Cu-0.5Ce solder joints,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 38, no. 5, pp. 1048–1055, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Liu and A.-P. Xian, “Tin whisker growth on the surface of sn-0.7Cu lead-free solder with a rare earth (Nd) addition,” Journal of Electronic Materials, vol. 38, no. 11, pp. 2353–2361, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. T.-H. Chuang and H.-J. Lin, “Inhibition of whisker growth on the surface of Sn-3Ag-0.5Cu-0.5Ce solder alloyed with Zn,” Journal of Electronic Materials, vol. 38, no. 3, pp. 420–424, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. K. N. Tu, “Interdiffusion and reaction in bimetallic Cu-Sn thin films,” Acta Metallurgica, vol. 21, no. 4, pp. 347–354, 1973. View at Publisher · View at Google Scholar · View at Scopus
  25. T.-H. Chuang, “Rapid whisker growth on the surface of Sn-3Ag-0.5Cu-1.0Ce solder joints,” Scripta Materialia, vol. 55, no. 11, pp. 983–986, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. R. Kolenak, M. Chachula, P. Sebo, and M. Kolenakova, “Wettability and shear strength of active Sn2Ti solder on Al2O3 ceramics,” Soldering and Surface Mount Technology, vol. 23, no. 4, pp. 224–228, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. C. Peng, M. Chen, and S. Liu, “Die bonding of silicon and other materials with active solder,” in Proceedings of the 11th International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP '10), pp. 275–278, IEEE, Xi'an, China, August 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. R. Koleňák and M. Prach, “Research of joining graphite by use of active solder,” Advanced Materials Research, vol. 875–877, pp. 1270–1274, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. L. Zhang, S.-B. Xue, L.-L. Gao et al., “Microstructure characterization of SnAgCu solder bearing Ce for electronic packaging,” Microelectronic Engineering, vol. 88, no. 9, pp. 2848–2851, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. M. A. Dudek and N. Chawla, “Nanoindentation of rare earth-Sn intermetallics in Pb-free solders,” Intermetallics, vol. 18, no. 5, pp. 1016–1020, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Pei and J. Qu, “Effect of lanthanum doping on the microstructure of tin-silver solder alloys,” Journal of Electronic Materials, vol. 37, no. 3, pp. 331–338, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Sadiq, R. Pesci, and M. Cherkaoui, “Impact of thermal aging on the microstructure evolution and mechanical properties of lanthanum-doped tin-silver-copper lead-free solders,” Journal of Electronic Materials, vol. 42, no. 3, pp. 492–501, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. V. L. Lanin, “Physical effects of ultrasound in the liquid media and its applications in the technics,” in Technology in the Electrotechnical Industry, vol. 2, pp. 10–15, 2013. View at Google Scholar