Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 309135, 11 pages
http://dx.doi.org/10.1155/2015/309135
Research Article

Shear Failure of RC Dapped-End Beams

1Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, 32610 Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia
2Department of Civil Engineering, Abu Dhabi University, P.O. Box 59911, Abu Dhabi, UAE

Received 2 May 2015; Revised 6 August 2015; Accepted 6 August 2015

Academic Editor: João M. P. Q. Delgado

Copyright © 2015 Muhammad Aswin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. E.-D. F. Taher, “Strengthening of critically designed girders with dapped-ends,” Structures and Buildings, vol. 158, no. 2, pp. 141–152, 2005. View at Google Scholar
  2. R. Herzinger, Stud reinforcements in dapped-ends of concrete beams [Ph.D. thesis], University of Calgary, Calgary, Canada, 2008.
  3. W.-Y. Lu, I.-J. Lin, S.-J. Hwang, and Y.-H. Lin, “Shear strength of high-strength concrete dapped-end beams,” Journal of the Chinese Institute of Engineers, vol. 26, no. 5, pp. 671–680, 2003. View at Google Scholar · View at Scopus
  4. Q. Wang, Z. Guo, and P. C. J. Hoogenboom, “Experimental investigation on the shear capacity of RC dapped end beams and design recommendations,” Structural Engineering and Mechanics, vol. 21, no. 2, pp. 221–235, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. A. H. Mattock and T. C. Chan, “Design and behavior of dapped end beams,” PCI Journal, vol. 24, no. 6, pp. 28–45, 1979. View at Publisher · View at Google Scholar
  6. P.-C. Huang and A. Nanni, “Dapped-end strengthening of full-scale prestressed double tee beams with FRP composites,” Advances in Structural Engineering, vol. 9, no. 2, pp. 293–308, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. K.-H. Yang, A. F. Ashour, and J.-K. Lee, “Shear strength of RC dapped-end beams using mechanism analysis,” Magazine of Concrete Research, vol. 63, no. 2, pp. 81–97, 2010. View at Google Scholar
  8. A. H. Mattock, Strut-and-Tie Models for Dapped-End Beams, Concrete International, 2012.
  9. T. Peng, Influence of detailing on response of dapped-end beams [M.S. thesis], McGill University, Montreal, Canada, 2009.
  10. T. Nagy-György, G. Sas, A. C. Dâescu, J. A. O. Barros, and V. Stoian, “Experimental and numerical assessment of the effectiveness of FRP-based strengthening configurations for dapped-end RC beams,” Engineering Structures, vol. 44, pp. 291–303, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. R. N. Mohamed and K. S. Elliot, Shear Strength of Short Recess Precast Dapped-End Beams Made of Steel Fiber Self Compacting Concrete, Singapore Concrete Institute, Singapore, 2008.
  12. H. Fukuyama, Y. Sato, V. C. Li, Y. Matsuzaki, and H. Mihashi, “Ductile engineered cementitious composite elements for seismic structural application,” in Proceedings of the World Conference on Earthquake Engineering (WCEE '00), 2000.
  13. V. C. Li and T. Kanda, “Engineered cementitious composites for structural applications,” Journal of Materials in Civil Engineering, vol. 10, no. 2, pp. 66–69, 1998. View at Publisher · View at Google Scholar · View at Scopus
  14. M. D. Lepech and V. C. Li, “Large-scale processing of engineered cementitious composites,” ACI Materials Journal, vol. 105, no. 4, pp. 358–366, 2008. View at Google Scholar · View at Scopus
  15. E.-H. Yang and V. C. Li, “Tailoring engineered cementitious composites for impact resistance,” Cement and Concrete Research, vol. 42, no. 8, pp. 1066–1071, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. H. M. E.-D. Afefy and M. H. Mahmoud, “Structural performance of RC slabs provided by pre-cast ECC strips in tension cover zone,” Construction and Building Materials, vol. 65, pp. 103–113, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Zhang, Z. Wang, X. Ju, and Z. Shi, “Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model,” Engineering Fracture Mechanics, vol. 131, pp. 419–438, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Qudah and M. Maalej, “Application of Engineered Cementitious Composites (ECC) in interior beam–column connections for enhanced seismic resistance,” Engineering Structures, vol. 69, pp. 235–245, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. PCI Design Handbook, Precast/Prestressed Concrete Institute, 7th edition, 2010.
  20. A. Abid and K. B. Franzen, Design of fiber reinforced concrete beams and slabs [M.S. thesis], Chalmers University of Technology, Gothenburg, Sweden, 2011.
  21. RILEM TC 162-TDF, “Test and design methods for steel fibre reinforced concrete,” Materials and Structures, vol. 36, no. 262, pp. 560–567, 2000. View at Publisher · View at Google Scholar
  22. ACI, “Building code requirements for structural concrete and commentary,” ACI 318-08, 2008. View at Google Scholar
  23. F. J. Vecchio and P. S. Wong, Vector2 & Formworks User's Manual, University of Toronto, Toronto, Canada, 2002.
  24. A. Shah, E. Haq, and S. Khan, “Analysis and design of disturbed regions in concrete structures,” Procedia Engineering, vol. 14, pp. 3317–3324, 2011. View at Publisher · View at Google Scholar
  25. J. Schlaich and K. Schafer, “Design and detailing of structural concrete using strut and tie models,” The Structural Engineer, vol. 69, no. 6, pp. 113–125, 1991. View at Google Scholar
  26. Eurocode 2, Design of Concrete Structures, Part 1-1: General Rules and Rules for Buildings, 2004.
  27. J. Y. Moreno-Martínez and R. Meli, “Experimental study on the structural behavior of concrete dapped-end beams,” Engineering Structures, vol. 75, pp. 152–163, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. FIP Recommendations, Practical Design of Structural Concrete, CEB, FIP, 1999.
  29. J. M. Gere and S. P. Timoshenko, Mechanics of Materials, Stanley, Thornes (Publishers), 4th edition, 1999.
  30. B. S. Mohammed, L. W. Ean, and M. A. Malek, “One way RC wall panels with openings strengthened with CFRP,” Construction and Building Materials, vol. 40, pp. 575–583, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. B. S. Mohammed, B. H. A. Bakar, and K. K. Choong, “Behaviour of axially loaded fired-claymasonry panels with openings,” The Indian Concrete Journal, vol. 83, no. 4, pp. 9–16, 2009. View at Google Scholar · View at Scopus
  32. M. A. Mansur and K. H. Tan, Concrete Beams with Openings—Analysis and Design, CRC Press, Boca Raton, Fla, USA, 1999.