Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 358746, 6 pages
http://dx.doi.org/10.1155/2015/358746
Research Article

Microstructures and Toughening of TiC-TiB2 Ceramic Composites with Cr-Based Alloy Phase Prepared by Combustion Synthesis in High-Gravity Field

1Department of Vehicle and Electrical Engineering, Mechanical Engineering College, Shijiazhuang 050003, China
2China Aerodynamics Research & Development Center, Mianyang 621000, China
3School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China

Received 19 September 2014; Revised 27 December 2014; Accepted 31 December 2014

Academic Editor: Hossein Moayedi

Copyright © 2015 Xuegang Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. T. Akinlabi, R. M. Mahamood, S. A. Akinlabi, and E. Ogunmuyiwa, “Processing parameters influence on wear resistance behaviour of friction stir processed Al-TiC composites,” Advances in Materials Science and Engineering, vol. 2014, Article ID 724590, 12 pages, 2014. View at Publisher · View at Google Scholar
  2. D. Vallauri, I. C. Atías Adrián, and A. Chrysanthou, “TiC-TiB2 composites: a review of phase relationships, processing and properties,” Journal of the European Ceramic Society, vol. 28, no. 8, pp. 1697–1713, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. H. Liang, H. Y. Wang, Y. F. Yang, Y. L. Du, and Q. C. Jiang, “Reaction path of the synthesis of TiC-TiB2 in Cu-Ti-B4C system,” International Journal of Refractory Metals and Hard Materials, vol. 26, no. 4, pp. 383–388, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Aminikia, “Investigation of the pre-milling effect on synthesis of nanocrystalline TiB2-TiC composite prepared by SHS method,” Powder Technology, vol. 232, pp. 78–86, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Kustas, B. Mishra, and J. Zhou, “Fabrication and characterization of TiB2/TiC and tungsten co-sputtered wear coatings,” Surface and Coatings Technology, vol. 153, no. 1, pp. 25–30, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Brodkin, A. Zavaliangos, S. R. Kalidindi, and M. W. Barsoum, “Ambient- and high-temperature properties of titanium carbide-titanium boride composites fabricated by transient plastic phase processing,” Journal of the American Ceramic Society, vol. 82, no. 3, pp. 665–672, 1999. View at Google Scholar · View at Scopus
  7. Y. F. Yang, H. Y. Wang, R. Y. Zhao, Y. H. Liang, and Q. C. Jiang, “Effect of Ni content on the reaction behaviors of self-propagating high-temperature synthesis in the Ni–Ti–B4C system,” International Journal of Refractory Metals and Hard Materials, vol. 26, no. 2, pp. 77–83, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. T. K. Barkley, J. E. Vastano, J. R. Applegate, and S. D. Bakrania, “Combustion synthesis of Fe-incorporated SnO2 nanoparticles using organometallic precursor combination,” Advances in Materials Science and Engineering, vol. 2012, Article ID 685754, 8 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Yu, K. Matsuura, and M. Ohno, “Combustion synthesis of TiC-TiB2-based cermets from elemental powders,” Advances in Tribology, vol. 2011, Article ID 105258, 8 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Liu and J. Li, “High-gravity combustion synthesis: a fast and furnace-free way for preparing bulk ceramic materials,” Journal of Asian Ceramic Societies, vol. 1, no. 2, pp. 134–142, 2013. View at Publisher · View at Google Scholar
  11. C. Yin, Y. Chen, and S. M. Zhong, “Fractional-order sliding mode based extremum seeking control of a class of nonlinear systems,” Automatica, vol. 50, no. 12, pp. 3173–3181, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  12. C. Yin, S.-m. Zhong, and W.-f. Chen, “Design of sliding mode controller for a class of fractional-order chaotic systems,” Communications in Nonlinear Science and Numerical Simulation, vol. 17, no. 1, pp. 356–366, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. C. Yin, B. Stark, Y. Q. Chen, S. M. Zhong, and E. Lau, “Fractional-order adaptive minimum energy cognitive lighting control strategy for the hybrid lighting system,” Energy and Buildings, vol. 87, pp. 176–184, 2015. View at Publisher · View at Google Scholar
  14. X. G. Huang, L. Zhang, Z. M. Zhao, and C. Yin, “Microstructure transformation and mechanical properties of TiC-TiB2 ceramics prepared by combustion synthesis in high gravity field,” Materials Science and Engineering: A, vol. 553, pp. 105–111, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. X. Huang, Z. Zhao, L. Zhang, and J. Wu, “The effects of ultra-high-gravity field on phase transformation and microstructure evolution of the TiC-TiB2 ceramic fabricated by combustion synthesis,” International Journal of Refractory Metals and Hard Materials, vol. 43, pp. 1–6, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Mahmoodian, M. A. Hassan, M. Hamdi, R. Yahya, and R. G. Rahbari, “In situ TiC–Fe–Al2O3–TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis,” Composites Part B: Engineering, vol. 59, pp. 279–284, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. W. J. Lee, Z. A. Munir, and M. Ohyanagi, “Dense nanocrystalline TiB2-TiC composites formed by field activation from high-energy ball milled reactants,” Materials Science and Engineering A, vol. 325, no. 1-2, pp. 221–227, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. W. J. Li, R. Tu, and T. Goto, “Preparation of directionally solidified TiB2-TiC eutectic composites by a floating zone method,” Materials Letters, vol. 60, no. 6, pp. 839–843, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. B. Zou, P. Shen, Z. Gao, and Q. Jiang, “Combustion synthesis of TiCx-TiB2 composites with hypoeutectic, eutectic and hypereutectic microstructures,” Journal of the European Ceramic Society, vol. 28, no. 11, pp. 2275–2279, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. A. A. Abdel-Hamid, S. Hamar-Thibault, and R. Hamar, “Crystal morphology of the compound TiB2,” Journal of Crystal Growth, vol. 71, no. 3, pp. 744–750, 1985. View at Publisher · View at Google Scholar · View at Scopus
  21. W.-J. Li, R. Tu, and T. Goto, “Preparation of directionally solidified TiB2-TiC eutectic composites by a floating zone method,” Materials Letters, vol. 60, no. 6, pp. 839–843, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Wen, S. B. Li, B. S. Zhang, and Z. X. Guo, “Reaction synthesis of TiB2-TiC composites with enhanced toughness,” Acta Materialia, vol. 49, no. 8, pp. 1463–1470, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. T. H. Courtney, Mechanical Behavior of Materials, McGraw-Hill, New York, NY, USA, 2nd edition, 2000.
  24. J. S. Zhang, Material Strength, HIT Press, Harbin, China, 2004.