Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 367632, 7 pages
http://dx.doi.org/10.1155/2015/367632
Research Article

Thermal Performance Analysis of Reinforced Concrete Floor Structure with Radiant Floor Heating System in Apartment Housing

Building & Urban Research Institute, Korea Institute of Civil Engineering and Building Technology, 283 Goyangdae-Ro, Ilsanseo-Gu, Goyang 411-712, Republic of Korea

Received 20 March 2015; Revised 19 June 2015; Accepted 21 June 2015

Academic Editor: Robert Cerný

Copyright © 2015 Young-Sun Jeong and Hae-Kwon Jung. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K.-W. Kim, G.-C. Jeong, K.-S. Yang, and J.-Y. Sohn, “Correlation between dynamic stiffness of resilient materials and heavyweight impact sound reduction level,” Building and Environment, vol. 44, no. 8, pp. 1589–1600, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. G.-S. Song, “Buttock responses to contact with finishing materials over the ONDOL floor heating system in Korea,” Energy and Buildings, vol. 37, no. 1, pp. 65–75, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Lee, J. Joo, and S. Kim, “Life cycle energy and cost analysis of thin flooring panels with enhanced thermal efficiency,” Journal of Asian Architecture and Building Engineering, vol. 14, no. 1, pp. 167–173, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. Korea Ministry Construction & Transportation (MOCT), Korea's Building Energy Code (MOCT Notification No 2010-1031), Korean Government, Seoul, Republic of Korea, 2010.
  5. Korea Institute of Construction Technology (KICT), Development of Thermal Insulation Design and Construction System of Building, KICT, Goyang-si, Republic of Korea, 1997.
  6. Y.-S. Jeong, H.-J. Choi, K.-W. Kim, G.-S. Choi, J.-S. Kang, and K.-S. Yang, “A study on the thermal conductivity of resilient materials,” Thermochimica Acta, vol. 490, no. 1-2, pp. 47–50, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Liu, D. Wang, and J. Liu, “Study on heat transfer process for in-slab heating floor,” Building and Environment, vol. 54, pp. 77–85, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Jin, X. Zhang, and Y. Luo, “A calculation method for the floor surface temperature in radiant floor system,” Energy and Buildings, vol. 42, no. 10, pp. 1753–1758, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. A. B. Larbi, “Statistical modelling of heat transfer for thermal bridges of buildings,” Energy and Buildings, vol. 37, no. 9, pp. 945–951, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. T. G. Theodosiou and A. M. Papadopoulos, “The impact of thermal bridges on the energy demand of buildings with double brick wall constructions,” Energy and Buildings, vol. 40, no. 11, pp. 2083–2089, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. S.-Y. Song, B.-K. Koo, and B.-H. Choi, “Insulation performances of the typical floor’s wall-slab and side wall-slab joints of apartment buildings with internal and external insulation systems,” Journal of the Architectural Institute of Korea, vol. 24, pp. 277–285, 2008. View at Google Scholar
  12. O. Kaynakli, “Parametric investigation of optimum thermal insulation thickness for external walls,” Energies, vol. 4, no. 6, pp. 913–927, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. K. Goodier, “Making and using an expanded plastic,” New Scientist, vol. 240, pp. 706–707, 1961. View at Google Scholar
  14. Korea Standards Association (KSA), KS L 9016:2005 Method for Measuring Thermal Conductivity of Insulation, Korea Standards Association (KSA), Seoul, Republic of Korea, 2005.
  15. ISO, “Thermal insulation—determination of steady-state thermal resistance and related properties—heat flow meter apparatus,” ISO 8301, International Organization for Standardization, 1991. View at Google Scholar
  16. Korea Ministry Construction & Transportation (MOCT), “Korea's the authorization of isolation system and management code for floor impact sound in apartment houses,” MOCT Notification 2009-1217, Korean Government, Seoul, Republic of Korea, 2009. View at Google Scholar
  17. Physibel, Physibel software, 2014, http://www.physibel.be/.
  18. ISO, “Thermal bridges in building construction—heat flows and surface temperatures—part 1: general calculation methods,” ISO 10211-1, International Organization for Standardization, 1995. View at Google Scholar
  19. L. Zalewski, S. Lassue, D. Rousse, and K. Boukhalfa, “Experimental and numerical characterization of thermal bridges in prefabricated building walls,” Energy Conversion and Management, vol. 51, no. 12, pp. 2869–2877, 2010. View at Publisher · View at Google Scholar · View at Scopus