Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 650769, 11 pages
http://dx.doi.org/10.1155/2015/650769
Research Article

Computational Approach in Formulating Mechanical Characteristics of 3D Star Honeycomb Auxetic Structure

Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Malaysia

Received 9 September 2014; Revised 4 January 2015; Accepted 5 January 2015

Academic Editor: Rui Vilar

Copyright © 2015 Mozafar Shokri Rad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [11 citations]

The following is the list of published articles that have cited the current article.

  • Xin-Tao Wang, Li Ma, and Xiao-Wen Li, “Interlocking assembled 3D auxetic cellular structures,” Materials and Design, vol. 99, pp. 467–476, 2016. View at Publisher · View at Google Scholar
  • Xiangwen Zhang, and Deqing Yang, “Mechanical properties of auxetic cellular material consisting of re-entrant hexagonal honeycombs,” Materials, vol. 9, no. 11, 2016. View at Publisher · View at Google Scholar
  • Xiang-Wen Zhang, and De-Qing Yang, “Numerical and Experimental Studies of a Light-Weight Auxetic Cellular Vibration Isolation Base,” Shock and Vibration, vol. 2016, pp. 1–16, 2016. View at Publisher · View at Google Scholar
  • Xiang Li, Zixing Lu, Zhenyu Yang, and Chen Yang, “Directions dependence of the elastic properties of a 3D augmented re-entrant cellular structure,” Materials and Design, vol. 134, pp. 151–162, 2017. View at Publisher · View at Google Scholar
  • Zadpoor, and Kolken, “Auxetic mechanical metamaterials,” RSC Advances, vol. 7, no. 9, pp. 5111–5129, 2017. View at Publisher · View at Google Scholar
  • Xuan Zhao, Qiang Gao, Liangmo Wang, Qiang Yu, and Z.D. Ma, “Dynamic crushing of double-arrowed auxetic structure under impact loading,” Materials & Design, 2018. View at Publisher · View at Google Scholar
  • F. Najarian, R. Alipour, M. Shokri-rad, A. Farokhi Nejad, and A. Razavykia, “Multi-objective optimization of converting process of auxetic foam using three different statistical methods,” Measurement, 2018. View at Publisher · View at Google Scholar
  • Da Chen, and Xiaoyu Zheng, “Multi-material Additive Manufacturing of Metamaterials with Giant, Tailorable Negative Poisson's Ratios,” Scientific Reports, vol. 8, no. 1, 2018. View at Publisher · View at Google Scholar
  • Qiang Gao, Chengqiang Ge, Weichao Zhuang, Liangmo Wang, and Zhengdong Ma, “Crashworthiness analysis of double-arrowed auxetic structure under axial impact loading,” Materials & Design, 2018. View at Publisher · View at Google Scholar
  • Mohsen Safikhani Nasim, and Ehsan Etemadi, “Three dimensional modeling of warp and woof periodic auxetic cellular structure,” International Journal of Mechanical Sciences, 2018. View at Publisher · View at Google Scholar
  • Zhen-Pei Wang, Leong Hien Poh, Yilin Zhu, Justin Dirrenberger, and Samuel Forest, “Systematic design of tetra-petals auxetic structures with stiffness constraint,” Materials & Design, pp. 107669, 2019. View at Publisher · View at Google Scholar