Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 659846, 9 pages
http://dx.doi.org/10.1155/2015/659846
Research Article

Effect of the Electrolyte Temperature and the Current Density on a Layer Microhardness Generated by the Anodic Aluminium Oxidation

1Department of Technologies and Materials, Faculty of Mechanical Engineering, Technical University of Košice, Mäsiarska 74, 042 00 Košice, Slovakia
2The Department of Mechanical Engineering, Institute of Technology and Businesses in České Budějovice, Okružní 10, 37001 České Budějovice, Czech Republic
3Department of Mathematics, Informatics and Cybernetics, Faculty of Manufacturing Technologies with a Seat in Prešov, Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovakia

Received 24 September 2014; Revised 19 March 2015; Accepted 23 March 2015

Academic Editor: Markku Leskela

Copyright © 2015 Emil Spišák et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Emil Spišák, Miroslav Gombár, Ján Kmec, et al., “Effect of the Electrolyte Temperature and the Current Density on a Layer Microhardness Generated by the Anodic Aluminium Oxidation,” Advances in Materials Science and Engineering, vol. 2015, Article ID 659846, 9 pages, 2015. https://doi.org/10.1155/2015/659846.