Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 694672, 10 pages
http://dx.doi.org/10.1155/2015/694672
Research Article

Preparation of Ag/Cu/Ti Nanofluids by Spark Discharge System and Its Control Parameters Study

1Department of Electrical Engineering, National Taipei University of Technology, Taipei 10608, Taiwan
2Light Source Division, National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan

Received 27 December 2014; Accepted 23 February 2015

Academic Editor: Belal F. Yousif

Copyright © 2015 Kuo-Hsiung Tseng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • Kuo Hsiung Tseng, Yi-Syuan Kao, and Chaur-Yang Chang, “Development and Implementation of a Micro-electric Discharge Machine: Real-Time Monitoring System of Fabrication of Nanosilver Colloid,” Journal of Cluster Science, 2016. View at Publisher · View at Google Scholar
  • Kuo-Hsiung Tseng, Chih-Ju Chou, To-Cheng Liu, Yu-Han Haung, and Meng-Yun Chung, “Preparation of Ag-Cu Composite Nanoparticles by the Submerged Arc Discharge Method in Aqueous Media,” Materials Transactions, vol. 57, no. 3, pp. 294–301, 2016. View at Publisher · View at Google Scholar
  • To-Cheng Liu, Leszek Stobinski, Kuo-Hsiung Tseng, Chih-Ju Chou, Der-Chi Tien, and Chun Yung Chang, “Relationship between Ag nanoparticles and Ag ions prepared by arc discharge method,” Nanotechnology Reviews, vol. 7, no. 1, pp. 1–9, 2018. View at Publisher · View at Google Scholar
  • Kuo-Hsiung Tseng, Chin-Liang Hsieh, Meng-Yun Chung, and Chang-Ji Wu, “The Design of Successful Arcing Rate Measuring Unit for Preparing Nano-Silver Colloid by Electrical Discharge Machine,” Journal of Testing and Evaluation, vol. 48, no. 5, pp. 20180010, 2018. View at Publisher · View at Google Scholar