Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 1374689, 12 pages
http://dx.doi.org/10.1155/2016/1374689
Research Article

Pull-Out Resistance Capacity of a New Perfobond Shear Connector for Steel Pile Cap Strengthening

1Institute of R&D, Ji Seung Consultant Co., Ltd., Seoul 06128, Republic of Korea
2Korea Institute of Civil Engineering and Building Technology, Goyang 10223, Republic of Korea
3Department of Architectural Engineering, Kyung Hee University, Yongin 17104, Republic of Korea

Received 9 November 2015; Accepted 3 January 2016

Academic Editor: Akihiko Kimura

Copyright © 2016 Young-Ho Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills, Mich, USA, 2011.
  2. Eurocode 2: Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings, BS EN 1992-1-1, British Standard Institution, London, UK, 2004.
  3. W. Zellner, “Recent designs of composite bridges and a new type of shear connectors,” in Proceedings of the ASCE/IABSE Engineering Foundation Conference on Composite Construction, pp. 240–252, Henniker, NH, USA, 1987.
  4. B. M. Sara and M. S. Bahram, “Perfobond shear connector for composite construction,” Engineering Journal, vol. 39, no. 1, pp. 2–12, 2002. View at Google Scholar
  5. M. R. Veldanda and M. U. Hosain, “Behaviour of perfobond rib shear connectors: push-out tests,” Canadian Journal of Civil Engineering, vol. 19, no. 1, pp. 1–10, 1992. View at Publisher · View at Google Scholar
  6. E. C. Oguejiofor and M. U. Hosain, “Behaviour of perfobond rib shear connectors in composite beams: full-size tests,” Canadian Journal of Civil Engineering, vol. 19, no. 2, pp. 224–235, 1992. View at Publisher · View at Google Scholar
  7. E. C. Oguejiofor and M. U. Hosain, “A paramatic study of perfobond rib shear connectors,” Canadian Journal of Civil Engineering, vol. 21, pp. 614–625, 1994. View at Google Scholar
  8. E. C. Oguejiofor and M. U. Hosain, “Numerical analysis of push-out specimens with perfobond rib connectors,” Computers & Structures, vol. 62, no. 4, pp. 617–624, 1997. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Machacek and J. Studnicka, “Perforated shear connectors,” Steel and Composite Structures, vol. 2, no. 1, pp. 51–66, 2002. View at Google Scholar
  10. I. Valente and P. J. S. Cruz, “Experimental analysis of Perfobond shear connection between steel and lightweight concrete,” Journal of Constructional Steel Research, vol. 60, no. 3–5, pp. 465–479, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. H.-Y. Kim and H.-B. Koo, “Composite behavior of perfobond rib shear connector for steel-concrete decks,” Journal of the Korean Society of Civil Engineers, vol. 26, no. 1, pp. 91–97, 2006 (Korean). View at Google Scholar
  12. ASTM International, “Standard test method for compressive strength of cylindrical concrete specimens,” ASTM Standard C39/C39M-11, ASTM International, 2011. View at Google Scholar