Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 1634840, 6 pages
http://dx.doi.org/10.1155/2016/1634840
Research Article

Experimental Analysis of the Feasibility of Shaving Process Applied for High-Strength Steel Sheets

Department of Tool and Materials Engineering, King Mongkut’s University of Technology Thonburi, Bangkok 10140, Thailand

Received 24 March 2016; Revised 31 May 2016; Accepted 14 June 2016

Academic Editor: Jingwei Zhao

Copyright © 2016 Wiriyakorn Phanitwong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Wiriyakorn Phanitwong, Arkarapon Sontamino, and Sutasn Thipprakmas, “Experimental Analysis of the Feasibility of Shaving Process Applied for High-Strength Steel Sheets,” Advances in Materials Science and Engineering, vol. 2016, Article ID 1634840, 6 pages, 2016. https://doi.org/10.1155/2016/1634840.