Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 1738417, 12 pages
http://dx.doi.org/10.1155/2016/1738417
Research Article

A Microstructure Based Strength Model for Slag Blended Concrete with Various Curing Temperatures

1Department of Architectural Engineering, Kangwon National University, Chuncheon-Si 200-701, Republic of Korea
2Structural Engineering Research Division, Korea Institute of Construction Technology, Goyang-Si 411-712, Republic of Korea

Received 7 October 2015; Accepted 24 November 2015

Academic Editor: Yuyin Wang

Copyright © 2016 Li-Na Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y.-Y. Kim, K.-M. Lee, J.-W. Bang, and S.-J. Kwon, “Effect of W/C ratio on durability and porosity in cement mortar with constant cement amount,” Advances in Materials Science and Engineering, vol. 2014, Article ID 273460, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. X.-Y. Wang and H.-S. Lee, “Modeling the hydration of concrete incorporating fly ash or slag,” Cement and Concrete Research, vol. 40, no. 7, pp. 984–996, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. A. A. Ramezanianpour and V. M. Malhotra, “Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume,” Cement & Concrete Composites, vol. 17, no. 2, pp. 125–133, 1995. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Luan, T. Ishida, T. Nawa, and T. Sagawa, “Enhanced hydration model and simulation of hydration process of blast furnace slag in blended cement,” Proceedings of Japan Concrete Institute, vol. 33, pp. 71–76, 2011. View at Google Scholar
  5. Ö. Eren, “Strength development of concretes with ordinary Portland cement, slag or fly ash cured at different temperatures,” Materials and Structures, vol. 35, no. 253, pp. 536–540, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. V. G. Papadakis and S. Tsimas, “Supplementary cementing materials in concrete: part I: efficiency and design,” Cement and Concrete Research, vol. 32, no. 10, pp. 1525–1532, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. V. G. Papadakis, S. Antiohos, and S. Tsimas, “Supplementary cementing materials in concrete. Part II: a fundamental estimation of the efficiency factor,” Cement and Concrete Research, vol. 32, no. 10, pp. 1533–1538, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Ishida, Y. Luan, T. Sagawa, and T. Nawa, “Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties,” Cement and Concrete Research, vol. 41, no. 12, pp. 1357–1367, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. J. J. Brooks and A. F. Al-Kaisi, “Early strength development of portland and slag cement concretes cured at elevated temperatures,” ACI Materials Journal, vol. 87, no. 5, pp. 503–507, 1990. View at Google Scholar · View at Scopus
  10. S. J. Barnett, M. N. Soutsos, J. H. Bungey, and S. G. Millard, “Fast-track construction with slag cement concrete: adiabatic strength development and strength prediction,” ACI Materials Journal, vol. 104, pp. 388–396, 2007. View at Google Scholar
  11. F. Tomosawa, “Development of a kinetic model for hydration of cement,” in Proceedings of the 10th International Congress Chemistry of Cement, S. Chandra, Ed., Gothenburg, Sweden, 1997.
  12. X. Y. Wang, “Properties prediction of fly ash blended concrete using hydration model,” Science China Technological Sciences, vol. 56, no. 9, pp. 2317–2325, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Matsushita, S. Hoshino, I. Maruyama, T. Noguchi, and K. Yamada, “Effect of curing temperature and water to cement ratio on hydration of cement compounds,” in Proceedings of the 12th International Congress on the Chemistry of Cement, J. Beaudoin, Ed., Montreal, Canada, 2007.
  14. K. Maekawa, T. Ishida, and T. Kishi, Multi-Scale Modeling of Structural Concrete, Taylor & Francis, London, UK, 2009.
  15. T. Iyoda, K. Inokuchi, and T. Uomoto, “Effect of slag hydration of blast furnace slag cement in different curing conditions,” in Proceedings of 13th International Congress on the Chemistry of Cement, A. Palomo, A. Zaragoza, and J. C. L. Agui, Eds., Madrid, Spain, 2011.
  16. K. R. Zheng, W. Sun, Y. T. Jia, Y. S. Zhang, and Y. Zhang, “Approaches to the appropriate admixture of Slag based on hydration of slag cement system,” Architecture Technology, vol. 36, pp. 39–40, 2005. View at Google Scholar
  17. X.-Y. Wang, “Evaluation of compressive strength of hardening silica fume blended concrete,” Journal of Materials Science, vol. 48, no. 17, pp. 5953–5961, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. X.-Y. Wang, “Properties prediction of ultra high performance concrete using blended cement hydration model,” Construction and Building Materials, vol. 64, pp. 1–10, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Lam, Y. L. Wong, and C. S. Poon, “Degree of hydration and gel/space ratio of high-volume fly ash/cement systems,” Cement and Concrete Research, vol. 30, no. 5, pp. 747–756, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. B. H. Oh and S. W. Cha, “Nonlinear analysis of temperature and moisture distributions in early-age concrete structures based on degree of hydration,” ACI Materials Journal, vol. 100, no. 5, pp. 361–370, 2003. View at Google Scholar · View at Scopus
  21. K. van Breugel, Simulation of Hydration and Formation of Structure in Hardening Cement-Based Materials, Delft University Press, 1997.