Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 1854839, 3 pages
http://dx.doi.org/10.1155/2016/1854839
Editorial

Advanced Materials and Technologies for Structural Performance Improvement

1Polytechnic Department of Engineering and Architecture, University of Udine, Via delle Scienze 206, 33100 Udine, Italy
2Department of the Built Environment, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, Netherlands
3Department of Civil Engineering, KU Leuven, Kasteelpark Arenberg 40, 3001 Leuven, Belgium
4Department of Civil and Environmental Engineering, University of Florence, Via S. Marta 3, 50139 Florence, Italy
5Department of Civil and Environmental Engineering, Northeastern University, 441 Snell Engineering Center, 360 Huntington Avenue, Boston, MA 02115, USA
6ELSA Laboratory, Institute for the Protection and Security of the Citizen, Joint Research Center of the European Commission, Via E. Fermi 2749, 21027 Ispra, Italy
7Department of Civil, Geo and Environmental Engineering, Technical University of München, Arcisstrasse 21, 80333 München, Germany

Received 17 April 2016; Accepted 17 April 2016

Copyright © 2016 Stefano Sorace et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Sorace and G. Terenzi, “The damped cable system for seismic protection of frame structures. Part I: general concepts, testing and modeling,” Earthquake Engineering & Structural Dynamics, vol. 41, no. 5, pp. 915–928, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Sorace and G. Terenzi, “Structural assessment of a modern heritage building,” Engineering Structures, vol. 49, pp. 743–755, 2013. View at Publisher · View at Google Scholar · View at Scopus