Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 2158706, 8 pages
http://dx.doi.org/10.1155/2016/2158706
Research Article

Experimental Study on the Performance and Microstructure of Cementitious Materials Made with Dune Sand

1Jiangsu Key Laboratory of Coast Ocean Resources Development and Environment Security, Hohai University, Nanjing 210098, China
2College of Harbour, Coastal and Offshore Engineering, Hohai University, Nanjing 210098, China

Received 14 July 2016; Revised 18 September 2016; Accepted 21 September 2016

Academic Editor: Kestutis Baltakys

Copyright © 2016 Chaohua Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Belferra, A. Kriker, S. Abboudi, and S. T. Bi, “Effect of granulometric correction of dune sand and pneumatic waste metal fibers on shrinkage of concrete in arid climates,” Journal of Cleaner Production, vol. 112, pp. 3048–3056, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. O. A. Alawad, A. Alhozaimy, M. S. Jaafar, A. Al-Negheimish, and F. N. A. Aziz, “Microstructure analyses of autoclaved ground dune sand-Portland cement paste,” Construction and Building Materials, vol. 65, pp. 14–19, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. W.-H. Wang, L.-H. Han, W. Li, and Y.-H. Jia, “Behavior of concrete-filled steel tubular stub columns and beams using dune sand as part of fine aggregate,” Construction and Building Materials, vol. 51, pp. 352–363, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. C. A. Anagnostopoulos, “Strength properties of an epoxy resin and cement-stabilized silty clay soil,” Applied Clay Science, vol. 114, pp. 517–529, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. B. H. Jin, J. X. Song, and H. F. Liu, “Engineering characteristics of concrete made of desert sand from Maowusu Sandy Land,” Applied Mechanics and Materials, vol. 174–177, pp. 604–607, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. S. El Euch Khay, J. Neji, and A. Loulizi, “Compacted dune sand concrete for pavement applications,” Proceedings of Institution of Civil Engineers: Construction Materials, vol. 164, no. 2, pp. 87–93, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. E.-S. S. A. Seif, “Assessing the engineering properties of concrete made with fine dune sands: an experimental study,” Arabian Journal of Geosciences, vol. 6, no. 3, pp. 857–863, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. G. X. Zhang, J. X. Song, J. S. Yang, and X. Y. Liu, “Performance of mortar and concrete made with a fine aggregate of desert sand,” Building and Environment, vol. 41, no. 11, pp. 1478–1481, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. A. S. Al-Harthy, M. A. Halim, R. Taha, and K. S. Al-Jabri, “The properties of concrete made with fine dune sand,” Construction and Building Materials, vol. 21, no. 8, pp. 1803–1808, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Alhozaimy, M. S. Jaafar, A. Al-Negheimish et al., “Properties of high strength concrete using white and dune sands under normal and autoclaved curing,” Construction and Building Materials, vol. 27, no. 1, pp. 218–222, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. F. J. Luo, L. He, Z. Pan, W. H. Duan, X. L. Zhao, and F. Collins, “Effect of very fine particles on workability and strength of concrete made with dune sand,” Construction and Building Materials, vol. 47, pp. 131–137, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Benaissa, A. Kamen, K. Chouicha, and S. Malab, “Panneau 3D aubéton de sable,” Materials and Structures, vol. 41, no. 8, pp. 1377–1391, 2008. View at Publisher · View at Google Scholar
  13. S. Gérômey, Evaluation des Paramètres d'Obtention de la Qualité des Bétons Projetés Utilisés dans des Soutènements Provisoires, des Revêtements Définitifs et des Renforcements d'Ouvrages, Institut National des Sciences Appliquées de Lyon, Lyon, France, 2003.
  14. T. Bouziani, M. Bederina, and M. Hadjoudja, “Effect of dune sand on the properties of flowing sand-concrete (FSC),” International Journal of Concrete Structures and Materials, vol. 6, no. 1, pp. 59–64, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Bédérina, M. M. Khenfer, R. M. Dheilly, and M. Quéneudec, “Reuse of local sand: effect of limestone filler proportion on the rheological and mechanical properties of different sand concretes,” Cement and Concrete Research, vol. 35, no. 6, pp. 1172–1179, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. S. El Euch Khay, J. Neji, and A. Loulizi, “Shrinkage properties of compacted sand concrete used in pavements,” Construction and Building Materials, vol. 24, no. 9, pp. 1790–1795, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Boutouil, Traitement des vases dedragage par stabilisation/solidification a base de ciment et additifs [Ph.D. thesis], Université du Havre, FrLe Havre, France, 1998.
  18. G. İ. Sezer, “Compressive strength and sulfate resistance of limestone and/or silica fume mortars,” Construction and Building Materials, vol. 26, no. 1, pp. 613–618, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. C. S. Poon, S. C. Kou, L. Lam, and Z. S. Lin, “Activation of fly ash/cement systems using calcium sulfate anhydrite (CaSO4),” Cement and Concrete Research, vol. 31, no. 6, pp. 873–881, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Gesoglu, E. Güneyisi, A. H. Nahhab, and H. Yazıcı, “The effect of aggregates with high gypsum content on the performance of ultra-high strength concretes and Portland cement mortars,” Construction and Building Materials, vol. 110, pp. 346–354, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Benaissa, Déformation différées d'un béton de sable [Ph.D. thesis], University of Bordeaux, Bordeaux, France, 1992.
  22. M. Sadegzadeh, C. L. Page, and R. J. Kettle, “Surface microstructure and abrasion resistance of concrete,” Cement and Concrete Research, vol. 17, no. 4, pp. 581–590, 1987. View at Publisher · View at Google Scholar · View at Scopus
  23. J. C. A. Galvão, K. F. Portella, A. Joukoski, R. Mendes, and E. S. Ferreira, “Use of waste polymers in concrete for repair of dam hydraulic surfaces,” Construction and Building Materials, vol. 25, no. 2, pp. 1049–1055, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. W. Wu and H. Z. Lian, High Performance Concrete, Railway Press of China, Beijing, China, 1999.
  25. H. Uchikawa, S. Hanehara, and H. Hirao, “Influence of microstucture on the physical properties of concentrate prepared by substituting mineral powder for part of fine aggregate,” Cement and Concrete Research, vol. 26, no. 1, pp. 101–111, 1996. View at Publisher · View at Google Scholar · View at Scopus