Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 2573920, 12 pages
http://dx.doi.org/10.1155/2016/2573920
Research Article

Morphology of Near- and Semispherical Melted Chips after the Grinding Processes Using Sol-Gel Abrasives Based on SEM-Imaging and Analysis

1Subject Group of Metrology and Quality, Department of Mechanical Engineering, Faculty of Mechanical Engineering, Koszalin University of Technology, Racławicka 15-17, 75-620 Koszalin, Poland
2Department of Mechanical Engineering, Faculty of Mechanical Engineering, Koszalin University of Technology, Racławicka 15-17, 75-620 Koszalin, Poland
3Department of Manufacturing Techniques and Automation, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Wincentego Pola 2, 35-959 Rzeszów, Poland

Received 31 January 2016; Accepted 12 May 2016

Academic Editor: Michael Aizenshtein

Copyright © 2016 W. Kapłonek et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

W. Kapłonek, K. Nadolny, and W. Habrat, “Morphology of Near- and Semispherical Melted Chips after the Grinding Processes Using Sol-Gel Abrasives Based on SEM-Imaging and Analysis,” Advances in Materials Science and Engineering, vol. 2016, Article ID 2573920, 12 pages, 2016. doi:10.1155/2016/2573920