Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 2761038, 7 pages
http://dx.doi.org/10.1155/2016/2761038
Research Article

Evaluation of the Properties of Bituminous Concrete Prepared from Brick-Stone Mix Aggregate

1Department of Civil Engineering, NIT Agartala, Tripura 799046, India
2Department of Civil Engineering, BITS Pilani, Rajasthan 799046, India

Received 22 November 2015; Revised 13 January 2016; Accepted 17 January 2016

Academic Editor: Rui Wang

Copyright © 2016 Dipankar Sarkar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. R. Mazumder, A. Kabir, and N. Yazdani, “Performance of over burnt distorted bricks as aggregates in pavement works,” Journal of Materials in Civil Engineering, vol. 18, no. 6, pp. 777–785, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. H. M. Rasel, M. A. Sobhan, and M. N. Rahman, “Performance evaluation of brick chips as coarse aggregate on the properties of Bituminous mixes,” S-JPSET, vol. 2, no. 2, pp. 37–46, 2011. View at Publisher · View at Google Scholar
  3. F. D. C. Leite, R. D. S. Motta, K. L. Vasconcelos, and L. Bernucci, “Laboratory evaluation of recycled construction and demolition waste for pavements,” Construction and Building Materials, vol. 25, no. 6, pp. 2972–2979, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Debieb and S. Kenai, “The use of coarse and fine crushed bricks as aggregate in concrete,” Construction and Building Materials, vol. 22, no. 5, pp. 886–893, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. M. D. Lanham, M. A. Sobhan, and M. Zakaria, “Experimental behaviour of bituminous macadam mixes with brick aggregate,” Journal of Civil Engineering, vol. 29, no. 1, pp. 115–123, 2001. View at Google Scholar
  6. ASTM, “Standard test method for density, relative density (specific gravity) and absorption of coarse aggregate,” ASTM C127-12, ASTM International, 2012. View at Google Scholar
  7. ASTM C535:12, Standard Test Method for Resistance to Degradation of Large Size Coarse Aggregate by Abrasion and Impact in the Los-Angeles Machine, 2012.
  8. ASTM, “Standard test method for resistance to degradation of small size coarse aggregate by abrasion and impact in the Los-Angeles machine,” ASTM C131-06, ASTM International, West Conshohocken, Pa, USA, 2006. View at Google Scholar
  9. MoRT&H, Specification of Ministry of Road Transport and Highways, Specification for Roads and Bridge Works, IV Revision, Indian Roads Congress, New Delhi, India, 2013.
  10. ASTM, “Standard test method for Sieve analysis of fine and coarse aggregate,” ASTM C136-06, ASTM International, 2006. View at Google Scholar
  11. IS, “Methods for testing tar and bituminous materials, determination of ductility,” IS 1208: 1978, Bureau of Indian Standards, 1978. View at Google Scholar
  12. Bureau of Indian Standards, “Methods for testing tar and bituminous materials, determination of penetration,” IS 1203:1978, Bureau of Indian Standards, New Delhi, India, 1978. View at Google Scholar
  13. Bureau of Indian Standard, “Methods for testing tar and bituminous materials, determination of specific gravity,” IS 1202:1978, Bureau of Indian Standard, 1978. View at Google Scholar
  14. IS 1205, Bureau of Indian Standard, Methods for Testing Tar and Bituminous Materials, Determination of Softening Point, India, 1978.
  15. Bureau of Indian Standards, “Indian standard paving bitumen—specification, 2nd revision,” IS 73:1992, Bureau of Indian Standards, 1992. View at Google Scholar
  16. ASTM International, “Standard test method for marshall stability and flow of asphalt mixtures,” ASTM D6931-12, ASTM International, West Conshohocken, Pa, USA, 2012. View at Google Scholar
  17. ASTM, “Standard test method for marshall stability and flow of bituminous mixtures,” ASTM D6927-06, ASTM International, West Conshohocken, Pa, USA, 2006. View at Google Scholar
  18. R. S. Kumar, Highway Engineering, Universities Press (India) Pvt. Ltd, 2011.
  19. ASTM International, “Standard test method for indirect tensile (IDT) strength of bituminous mixtures,” ASTM D6931-12, ASTM International, West Conshohocken, Pa, USA, 2012. View at Google Scholar
  20. Bureau of Indian Standards, “Methods for test for determination of stripping value of road aggregates,” IS 6241:1971, Bureau of Indian Standards, New Delhi, India, 1971. View at Google Scholar
  21. F. Moghadas Nejad, A. R. Azarhoosh, G. H. Hamedi, and M. J. Azarhoosh, “Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt,” Construction and Building Materials, vol. 31, pp. 384–388, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. V. B. Kakade and M. A. Reddy, “Effect of type and quantity of binder on rutting characteristics of bituminous mix,” Indian Highways, vol. 42, no. 3, pp. 8–14, 2014. View at Google Scholar
  23. X. Shu, B. Huang, and D. Vukosavljevic, “Laboratory evaluation of fatigue characteristics of recycled asphalt mixture,” Construction and Building Materials, vol. 22, no. 7, pp. 1323–1330, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. G. G. Al-Khateeb and K. A. Ghuzlan, “The combined effect of loading frequency, temperature and stress level on the fatigue life of asphalt paving mixtures using the IDT test configuration,” International Journal of Fatigue, vol. 59, pp. 254–261, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. ASTM International, “Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension test,” ASTM D7369-11, ASTM International, West Conshohocken, Pa, USA, 2011. View at Google Scholar