Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 3701292, 17 pages
http://dx.doi.org/10.1155/2016/3701292
Research Article

Pilot Study for Investigating the Cyclic Response of the Recentering Bridge Bearing System Combined with the Friction Damper

1Department of Civil and Environmental Engineering, Incheon National University, Incheon 22012, Republic of Korea
2Incheon Disaster Prevention Research Center, Incheon National University, Incheon 22012, Republic of Korea

Received 11 May 2016; Revised 24 July 2016; Accepted 8 August 2016

Academic Editor: Pavel Lejcek

Copyright © 2016 Jong Wan Hu and Yong-il Cho. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Jiang, X. Qiang, H. Kolstein, and F. Bijlaard, “Analysis on adhesively-bonded joints on FRP-steel composite bridge under combined loading: arcan test and numerical modeling,” Polymers, vol. 8, no. 1, pp. 1–18, 2016. View at Google Scholar
  2. A. R. Bhuiyan and M. S. Alam, “Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing,” Engineering Structures, vol. 49, no. 4, pp. 396–407, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. E. T. Filipov, L. A. Fahnestock, J. S. Steelman, J. F. Hajjar, J. M. LaFave, and D. A. Foutch, “Evaluation of quasi-isolated seismic bridge behavior using nonlinear bearing models,” Engineering Structures, vol. 49, pp. 168–181, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Pan, C. C. Fu, and Y. Jiang, “Uncertainty analysis of creep and shrinkage effects in long-span continuous rigid frame of Sutong bridge,” Journal of Bridge Engineering, vol. 16, no. 2, pp. 248–258, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. F. Wang, Y. S. Ma, B. Han, and S. Y. Deng, “Temperature effect on creep behavior of CFST arch bridges,” Journal of Bridge Engineering, vol. 18, no. 12, pp. 1397–1405, 2013. View at Publisher · View at Google Scholar
  6. O. E. Ozbulut and S. Hurlebaus, “Seismic protection of bridge structures using shape memory alloy-based isolation devices,” in Proceedings of the Structures Congress, pp. 2066–2077, April 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. M. T. A. Chaudhary, M. Abe, Y. Fujino, and J. Yoshida, “System identification of two base-isolated bridges using seismic records,” Journal of Structural Engineering, vol. 126, no. 10, pp. 1187–1195, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. J. W. Hu, “Response of seismically isolated steel frame buildings with sustainable lead-rubber bearing (LRB) isolator devices subjected to near-fault (NF) ground motions,” Sustainability, vol. 7, no. 1, pp. 111–137, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. G. P. Warn and A. S. Whittaker, “Vertical earthquake loads on seismic isolation systems in bridges,” Journal of Structural Engineering, vol. 134, no. 11, pp. 1696–1704, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Seo and J. W. Hu, “Seismic response and performance evaluation of self-centering LRB isolators installed on the CBF building under NF ground motions,” Sustainability, vol. 8, no. 2, pp. 109–130, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. J. W. Hu and M.-H. Noh, “Seismic response and evaluation of SDOF self-centering friction damping braces subjected to several earthquake ground motions,” Advances in Materials Science and Engineering, vol. 2015, Article ID 397273, 17 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. J. W. Hu, “Investigation on the cyclic response of superelastic shape memory alloy (SMA) slit damper devices simulated by quasi-static finite element (FE) analyses,” Materials, vol. 7, no. 2, pp. 1122–1141, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Seo, Y. C. Kim, and J. W. Hu, “Pilot study for investigating the cyclic behavior of slit damper systems with recentering Shape Memory Alloy (SMA) bending bars used for seismic restrainers,” Applied Sciences, vol. 5, no. 3, pp. 187–208, 2015. View at Publisher · View at Google Scholar
  14. G. Song, N. Ma, and H.-N. Li, “Applications of shape memory alloys in civil structures,” Engineering Structures, vol. 28, no. 9, pp. 1266–1274, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. R. DesRoches, J. McCormick, and M. Delemont, “Cyclic properties of superelastic shape memory alloy wires and bars,” ASCE Journal of Structural Engineering, vol. 130, no. 1, pp. 38–46, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. ABAQUS, ABAQUS 6.12 User's Manuals, Hibbitt, Karlsson, and Sorensen, Pawtucket, RI, USA, 2013.
  17. F. Auricchio and E. Sacco, “A one-dimensional model for superelastic shape-memory alloys with different elastic properties between austenite and martensite,” International Journal of Non-Linear Mechanics, vol. 32, no. 6, pp. 1101–1114, 1997. View at Publisher · View at Google Scholar · View at Scopus
  18. J. W. Hu, “Numerical simulation for the behavior of superelastic shape memory alloys,” Journal of Mechanical Science and Technology, vol. 27, no. 2, pp. 381–386, 2013. View at Publisher · View at Google Scholar · View at Scopus