Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 4724036, 13 pages
http://dx.doi.org/10.1155/2016/4724036
Research Article

Pneumatic Formwork Systems in Structural Engineering

Institute for Structural Engineering, TU Vienna, Karlsplatz 13, E212-2, 1040 Vienna, Austria

Received 17 June 2016; Accepted 10 July 2016

Academic Editor: João M. P. Q. Delgado

Copyright © 2016 Benjamin Kromoser and Patrick Huber. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • John Orr, David Fulford, and David Williamson, “Biogas dome construction using pneumatics,” Journal of Construction in Developing Countries, vol. 22, no. 2, pp. 35–53, 2017. View at Publisher · View at Google Scholar
  • Johann Kollegger, Karin Gradenegger, Benjamin Kromoser, Hannes Kari, and Martin Ganster, “Ein innovatives Betonschalenbauverfahren in Anwendung: Herstellung der Wildbrücke AM2 mit PFHC: Das Aufblasen einer 546 t schweren Betonplatte zu einer segmentierten Betonschale,” Beton- und Stahlbetonbau, vol. 113, no. 3, pp. 222–232, 2018. View at Publisher · View at Google Scholar
  • Johann Kollegger, and Benjamin Kromoser, “Conceptual design, geometry optimization and calculation of the concrete shell bridge AM2 built with PFHC,” Beton- und Stahlbetonbau, vol. 113, no. 2, pp. 88–95, 2018. View at Publisher · View at Google Scholar