Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 4863024, 10 pages
http://dx.doi.org/10.1155/2016/4863024
Research Article

Effects of Single and Blended Coating Pigments on the Inkjet Image Quality of Dye Sublimation Transfer Printed Paper: SiO2, CaCO3, Talc, and Sericite

1Department of Environmental Engineering, Da-Yeh University, Changhua 51591, Taiwan
2Fu Jen Catholic University, New Taipei City 24205, Taiwan
3Taiwan Textile Research Institute, New Taipei City 23647, Taiwan
4Department of Forestry, National Chung Hsing University, Taichung 40227, Taiwan

Received 7 May 2016; Revised 28 July 2016; Accepted 10 August 2016

Academic Editor: Massimiliano Barletta

Copyright © 2016 Chi-Ching Lin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Swain, Sublimation 101-The Complete Guide to Successful Dye Sublimation Printing, Sawgrass Technologies, Inc, Mount Pleasant, Calif, USA, 2011.
  2. J. Koh, “Dyeing with disperse dyes,” in Textile Dyeing, P. Hauser, Ed., chapter 10, pp. 195–220, InTech, Rijeka, Croatia, 2011. View at Google Scholar
  3. Y. J. Yin, C. X. Wang, Q. K. Shen, C. M. A. Galib, and G. Zhang, “Surface deposition on cellulose substrate via cationic SiO2/TiO2 hybrid sol for transfer printing using disperse dye,” Industrial and Engineering Chemistry Research, vol. 52, no. 31, pp. 10656–10663, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. H. S. El-Sayad and S. El-Sherbiny, “A study into the influence of paper coatings on paper properties and print quality of dye sublimation thermal prints,” Polymer-Plastics Technology and Engineering, vol. 47, no. 2, pp. 122–136, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Lamminmäki, J. P. Kettle, P. Puukko, P. A. C. Gane, and C. Ridgway, “Inkjet print quality: the role of polyvinyl alcohol in speciality CaCO3 coatings,” Journal of Pulp and Paper Science, vol. 35, no. 3-4, pp. 137–147, 2009. View at Google Scholar · View at Scopus
  6. Y. J. Wu, A. Pekarovlcova, P. D. Fleming, and M. Joyce, “Influence of coating pigment porosity on inkjet color and lightfastness performance,” TAGA Journal of Graphic Technology, vol. 6, pp. 6–17, 2013. View at Google Scholar
  7. D. H. Varney and G. A. Saunders, “Modified calcium carbonate for blade applied inkjet papers,” in Proceedings of the TAPPI/PIMA PaperCon '08 Conference, Dallas, Tex, USA, May 2008.
  8. Y.-S. Perng, I.-C. Wang, W.-C. Yang, and M.-H. Lai, “Application of talc to calcium carbonate-containing paper coating formulations,” Taiwan Journal of Forest Science, vol. 23, no. 1, pp. 1–11, 2008. View at Google Scholar · View at Scopus
  9. Y.-S. Perng and E. I.-C. Wang, “Development of a functional filler: swelling sericite,” Tappi Journal, vol. 3, no. 6, pp. 26–31, 2004. View at Google Scholar · View at Scopus
  10. Y.-S. Perng and E. I.-C. Wang, “Optimization of handsheet greaseproof properties: the effects of furnish, refining, fillers, and binders,” BioResources, vol. 7, no. 3, pp. 3895–3909, 2012. View at Google Scholar · View at Scopus
  11. Y.-S. Perng, E. I.-C. Wang, C.-K. Chang, and C.-P. Chang, “Nanosericite as an innovative microparticle in dual-chemical paper retention systems,” Advances in Materials Science and Engineering, vol. 2013, Article ID 536961, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. Y.-S. Perng, E. I.-C. Wang, C.-C. Lu, and L.-S. Kuo, “Performance of sericite as a pigment for coating paper,” Appita Journal, vol. 59, no. 5, pp. 378–390, 2006. View at Google Scholar · View at Scopus
  13. Y. S. Perng, I. C. Wang, C. C. Lu, and L. S. Kuo, “Application of sericite to LWC coatings,” Tappi Journal, vol. 7, no. 6, pp. 21–26, 2008. View at Google Scholar
  14. Y. S. Perng, I. C. Wang, M. J. Liu, and L. S. Kuo, “Application of nanosericite to coated paper,” Taiwan Journal of Forest Science, vol. 26, no. 2, pp. 151–162, 2011. View at Google Scholar
  15. Y. Zhang, Z. Liu, Y. Cao, R. Li, and Y. Jing, “Impact of binder composition on inkjet printing paper,” BioResources, vol. 10, no. 1, pp. 1462–1476, 2015. View at Google Scholar · View at Scopus
  16. F. L. Chang, S. S. Guan, and J. C. Chiang, “An analysis on the quality of reproducibility of textile print designs,” Journal of Science and Technology, vol. 22, no. 1, pp. 57–71, 2013 (Chinese). View at Google Scholar
  17. ANSI@ CGATS,4-1993 P3.
  18. H. Kipphan, Handbook of Print Media: Technologies and Manufacturing Processes, Springer, Berlin, Germany, 2001.